Download PDFE13 ZFSWITCHES
Document overview
- PDF pages: 3
Technical content
Page 1
Snap Action Switch
Single Pole General Purpose
E13, E14, G13
Features
- Choice of 3 current ratings
- Long life coil spring, snap action mechanism
- Agency approved extended life versions available
- RoHS compliant
- High temperature versions available – contact factory
Typical Applications
- Household appliances
- Automated assembly lines
- Brake switch on utility vehicles
- Industrial and accessible door openers
- Vending machines
Example: E13-00E0 is a 15 A, normally open SPDT pole switch with a standard ratio button
Part Number Breakdown
E13-00E0
actuator.
Type1
Actuator1
Series Type
Circuitry
| 0 | Standard ratio actuator or button |
| 5 | High ratio actuator |
| 0 | Double Throw |
| 1 | Normally Open |
| 2 | Normally Closed |
| A | Button for E14 |
| E | Button for E13 |
| H | Lever |
| J | Button with ferrule |
| K | Roller |
| M | Button with extra over-travel and ferrule |
1Actuator Type 5 only available with H and K actuators
Electrical Specifications per UL1054
15 A, 125 / 250 VAC
E132
6000 operations; 100,000 available – contact factory
E142
6000 operations
G13
100,000 operations
2DC ratings to 105 ⁰C (221 ⁰F) only
Commonly Stocked Distributor Parts E13-00E0
E13-00M0
E13-00H0
E13-01E0
E13-00J0
E13-01H0
E13-00K0
E13-50H0
Notes:
¾ HP, 125 VAC / 1 ½ HP, 250 VAC
22 A, 48 VDC 25 A, 125 / 250 VAC 1 HP, 125 VAC / 2 HP, 250 VAC
22 A, 48 VDC 0.1 A, 125 VAC 0.1 A, 30 VDC
E14-00A0
E14-01M0
E14-00H0
E14-50H0
E14-00K0
G13-00M0
E14-00M0
G13-50H0
Part numbers with a leading 0 are functionally no different than without a leading 0 (ex.: 0E13-00E0 is the same switch as E13-00E0). Quick-connect terminals are standard; for custom screw terminals, contact the factory or your distributor. For configurable part numbers not listed above or for custom part numbers, contact the factory or your distributor
Page 1 of 3, Last saved by 2015-03-02, Specifications subject to change without notice.
Page 2
Actuator Specifications3
E13/G13 Series
Operating Point4
Actuator
Max
Max
Operating Pre-Travel Force g (lb) mm (in)
mm (in)
E
425 (0.94) 1.27 (0.050) 7.24 ± 0.51 (0.285 ± 0.020)
H
100 (0.22) 6.35 (0.250) 7.93 ± 1.57 (0.312 ± 0.062)
H High ratio
65 (0.14) 8.71 (0.343) 7.14 ± 1.57 (0.281 ± 0.062)
J
425 (0.94) 1.27 (0.050) 17.02 ± 0.76 (0.670 ± 0.030)
K
100 (0.22) 6.35 (0.250) 18.24 ± 1.57 (0.718 ± 0.062)
K High ratio
63 (0.14) 10.24 (0.403) 17.45 ± 1.57 (0.687 ± 0.062)
M
425 (0.94) 1.27 (0.050) 20.63 ± 0.76 (0.812 ± 0.030)
E14 Series
Operating Point4
Actuator
Max
Max
Operating Pre-Travel Force g (lb) mm (in)
mm (in)
A
850 (1.87) 2.54 (0.100) 6.30 ± 0.66 (0.248 ± 0.026)
H
280 (0.62) 7.93 (0.312) 11.89 ± 1.57 (0.468 ± 0.062)
H High ratio
170 (0.37) 13.34 (0.525) 11.10 ± 1.57 (0.437 ± 0.062)
J
850 (1.87) 2.54 (0.100) 16.08 ± 0.76 (0.633 ± 0.030)
K
285 (0.63) 8.84 (0.348) 21.84 ± 1.57 (0.860 ± 0.062)
K High ratio
211 (0.47) 12.27 (0.483) 21.03 ± 1.57 (0.828 ± 0.062)
M
850 (1.87) 2.54 (0.100) 19.69 ± 0.76 (0.775 ± 0.030)
3Contact factory regarding combinations not shown 4Measured above reference line; refer to dimensional drawing below
Min Over-
Max Actuation Length5
Travel
Movement Differential
mm (in)
mm (in)
mm (in) N/A
2.54 (0.100) 0.38 (0.015) 4.75 (0.187) 2.36 (0.093) 38.10 (1.500) 4.75 (0.187)
3.56 (0.14) 44.45 (1.750)
2.74 (0.108) 0.38 (0.015)
N/A
4.75 (0.187) 2.36 (0.093) 35.33 (1.391) 4.75 (0.187) 2.36 (0.093) 41.28 (1.625) 5.54 (0.218) 0.38 (0.015)
N/A
Min Over-
Max Actuation Length5
Travel
Movement Differential
mm (in)
mm (in)
mm (in) N/A
1.27 (0.050) 0.38 (0.015) 2.67 (0.105) 1.27 (0.050) 20.85 (0.821) 5.54 (0.218) 2.03 (0.080) 27.20 (1.071) 1.27 (0.050) 0.38 (0.015)
N/A
3.30 (0.130) 1.14 (0.045) 17.48 (0.688) 5.54 (0.218) 1.85 (0.073) 23.95 (0.943) 4.27 (0.168) 0.38 (0.015)
N/A
5Actuator tolerances ± 0.791 mm (0.031”); G13 has operating point tolerance of ± 7.62 (0.30); E14 H and K actuators are shorter and formed up 11⁰ at the button
Material Specifications
Case Actuating Button Common Terminal
NO and NC Terminal
Moving Blade
Spring Auxiliary Actuators Roller
Contacts
Environmental Specifications
Temperature Rating
Flammability Rating
Dimensions – see page 3
Page 2 of 3, Last saved by 2015-03-02, Specifications subject to change without notice.
General Purpose Phenolic Thermoplastic Copper Alloy Copper Alloy (E13, G13) Copper (E14) Copper Alloy (E13, G13) Copper (E14) Stainless Steel
Cold-Rolled Steel (Nickel-Plated) Sintered Stainless Steel Gold Crosspoint (G13) Silver Alloy (E13, E14)
105 ⁰C (221 ⁰F) standard 150 ⁰C (302 ⁰F) available 200 ⁰C (392 ⁰F) available for E13
UL94HB
Page 3
Dimensions – mm (inches)
Page 3 of 3, Last saved by 2015-03-02, Specifications subject to change without notice.