FXP07070100A ETC2
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 11
Technical content
SPE-11-8-114/A | page 1 of 11 FXP07.07.0100A Specification Part No. FXP07.07.0100A Product Name Flexible PCB Penta Band GSM Antenna 100mm Ø1.13 cable IPEX connector Feature Very low profile Penta band GSM Adhesive tape for easy mounting RoHS compliant Front Back
SPE-11-8-114/A | page 2 of 11 FXP07.07.0100A is a general version of stick-on flexible PCB. It is designed with 100mm 1.13mm coaxial cable and the IPEX connector for easy installation. FXP07.07.0100A is ideal for initial test of FPCB type antenna. 1. Introduction 2. Specification Communication System Penta-Band Cellular AMPS GSM DCS PCS UMTS Frequency (MHz) 824~896 880~960 1710~1880 1850~1990 1710~2170 Efficiency (ground plane) 82% 82% 29% 60% 49% Efficiency (free space) 11% 12% 41% 32% 33% Impedance 50Ω Radiation Pattern Omni-directional Polarization Linear FPCB 41.0 x 24.0mm Connector IPEX Cable Ø1.13 Cable Length 100mm Adhesive Tape 3M 467 Operation Temperature -40°C~+85°C Storage Temperature -40°C~+85°C
SPE-11-8-114/A | page 3 of 11 3. Electrical Property Test Setup FXP.07 with original ground plane FXP.07 was design with a cell phone size ground plane (110 x 45 mm) so works the best with this ground plane. Tests were setup to demonstrate its RF properties with this ground plane, in free space and adhere to a plastic. Satimo SG64 3D-chamber is used for radiation and efficiency test with 5% tolerance.
SPE-11-8-114/A | page 4 of 11 3. Electrical Property Mounting instructions and ground-plane connection Peel back 3m paper. On the underside of the antenna is automotive grade 3m adhesive (glue) for sticking the FXP.07 directly to plastic (e.g. housing). The antenna can be curved around housing but should not be folded sharply Ground connection - this small square pad at the bottom of the FXP.07 can be seen when paper is removed. This should be connected to extra ground or metal to increase efficiency (e.g. allow pad to touch the side of a PCB like the picture above. This is the antenna trace or signal feed and should be allowed to be free from the PCB and allowed to exist in free area on non metal area (plastic housing)
SPE-11-8-114/A | page 5 of 11 3. Electrical Property z y x Free space antenna setup and Satimo SG64 3D-chamber. x y z FXP.07 places on a plastic in the chamber. y z x y z x
SPE-11-8-114/A | page 6 of 11 Radiation Pattern FXP-07 with ground plane x-y plane x-z plane 270deg 90deg 5.00dB 0.00dB -5.00dB -10.00dB -15.00dB -20.00dB -25.00dB -30.00dB -35.00dB 0deg180deg 270deg 90deg 5.00dB 0.00dB -5.00dB -10.00dB -15.00dB -20.00dB -25.00dB -30.00dB -35.00dB 0deg180deg FXP-07 in free space x-y plane x-z plane 180deg 0deg 5.00dB 0.00dB -5.00dB -10.00dB -15.00dB -20.00dB -25.00dB -30.00dB 270deg 90deg Legend 180deg 0deg 5.00dB 0.00dB -5.00dB -10.00dB -15.00dB -20.00dB -25.00dB -30.00dB 270deg 90deg
SPE-11-8-114/A | page 7 of 11 Radiation Pattern FXP-07 adhere on plastic x-y plane x-z plane 180deg 0deg 5.00dB 0.00dB -5.00dB -10.00dB -15.00dB -20.00dB -25.00dB -30.00dB 270deg 90deg Legend 180deg 0deg 5.00dB 0.00dB -5.00dB -10.00dB -15.00dB -20.00dB -25.00dB -30.00dB 270deg 90deg
SPE-11-8-114/A | page 8 of 11 Efficiency 100% 80% 60% 40% 20% 600 1000 1400 1800 2200 Ground Plane Free Space Plastic Miniature antennas couple to the ground plane for radiation so the efficiency of the antenna without a ground plane is largely degrades. These tests demonstrate the best performance (with the designed ground) and the worst performance (with no ground) possible of FXP.07. Adhere the antenna to a plastic changes the result, particularly in higher frequency bands.
SPE-11-8-114/A | page 9 of 11 Return Loss -10 -14 -18 -22 -26 -30 400 800 1200 1600 2000 2400 Ground Plane Free Space Plastic Return loss result also indicates that FXP.07 needs to connect to a ground plane for proper operation.
SPE-11-8-114/A | page 10 of 11 4. Mechanical Drawing Name Material Finish QTY 1 FXP07 PCB FPCB 0.1t Green 1 2 1.13 Coaxial Cable FEP White 1
3 IPEX MHF1 Brass Gold 1
4 Double-Sided Adhesive 3M 467 Brown Liner 1
NOTES: All material must be RoHS compliant. Open/short QC, VSWR required.
SPE-11-8-114/A | page 11 of 11 Taoglas makes no warranties based on the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. Taoglas reserves all rights to this document and the information contained herein. Reproduction, use or disclosure to third parties without express permission is strictly prohibited. Copyright © Taoglas Ltd. FXP07 FXP07Quad-band GSM taoglas 100pcs antenna per small PE bag 10 small PE bag per big PE bag 1000pcs antennas per big PE bag 5. Packaging