FX8C-60P-SV HIROSE

Document overview

  • PDF pages: 11

Technical content

Page 1

PDF page 1 diagram

FX8 Series

PDF page 1 diagram

IFeatures

1. Stacking Height 3mm to 16mm available

The board to board stacking height can correspond to 3mm~16mm.

2. SMT Coplanarity

The coplanarity of the SMT solder area lead is maintained at the high accuracy of less than 0.1mm.

3. Mating Guide

The very small and guide rib is provided, and secures ±0.6mm self-alignment, considering the mating operativity into accounts.

4. Mis-insertion Prevention

The boss prevents mis-insertion in the board to cause due to the boss position and boss diameter.

5. Two-piece Connection Product

In order to enhance the mating reliability for the fine pitch connector using two-pieces, the two-pieces of connectors are combined by our unique method, and can secure the mount position accuracy. In such a new concept, the two-piece connected product is prepared at every number of contacts (The standard mating pitch for the two-piece interconnected product in two rows is 11mm.)

IApplications

FX8C Series

PDF page 1 diagram

GStacking Height 3,4mm-FX8 Series

PDF page 1 diagram

GStacking Height 5 to 16mm-FX8C Series

PDF page 1 diagram

Note pc, business equipments, which require miniaturization or light-weight

A226

Page 2

FX8C Series

IProduct Specifications

Operating Temperature Range -55ç to +85ç Note 1.

Storage Temperature Range -10ç to +60ç Note 2.

Current rating 0.4A

Rating

Voltage rating 100V AC Operating Humidity Range -40% to 80%

Item

Specification

  1. Insulation Resistance 100M ohms min. 2. Withstanding voltage

No flashover or insulation breakdown.

  1. Contact Resistance 80m ohms max. 4. Vibration

No electrical discontinuity of 1µs or more

Storage Humidity Range 40% to 70%

Condition

250V DC 300V AC/1 minute 100mA Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.

  1. Humidity (Steady state) Contact resistance: 100m ohms max.Insulation resistance: 100M ohms min.

96 hours at temperature of 40ç and humidity of 90% to 95%

Contact resistance: 100m ohms max.Insulation resistance: 100M ohms min.

  1. Temperature Cycle
  1. Durability (Mating/un-mating) Contact resistance: 100m ohms max.

(-55ç: 30 minutes, 15 to 35ç: 2 to 3 minutes (-85ç: 30 minutes, 15 to 35ç: 2 to 3minutes) 5 cycles 50 cycles

  1. Resistance to Soldering heat No deformation of components affecting performance. Reflow: At the recommended temperature profile

Manual soldering: 300ç for 3 seconds

Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.

IMaterial

Part

Material

Insulator

PBS

Header Contact

Phosphor bronze

Receptacle Contact

Phosphor bronze

Note : The black dots on the insulater will not affect performance.

IOrdering Information

Finish

Remarks

Light brown

UL94V-0

Contact area

Gold plated

–––––––

Lead area

Tin-lead plated

Contact area

Gold plated

–––––––

Lead area

Tin-lead plated

FX8C - 120 P - SV 1 (22)

GSingle Product

q

w e r t

y

q Series Name : FX8C t Product height variationBlank : Standard (Minimum low profile) 1: +1mm . . . . . . 3:+3mm
w Number of Contacts :60, 80, 90, 120, 140
e Connector type P :Header S :Receptacle y Packaging Type Blank: Tray packaging (21) : Tube packaging (22) : Embossed tape package
r Contact type SV :Board vertical type

\*The embossed tape packaging product is 60 and 80 contacts only. \*The packing of the FX8C-\*\*P-SV6 type is the tray packaging and the tube packaging only.

FX8C - 120/120 P 11 - SV 1 J

Gtwo-piece Connection Product

t y u

q

w e r

q Series Name :FX8C r Connector to Connector Pitch
w Number of Contacts: 60∞2, 80∞2, 90∞2, 100∞2, 120∞2, 140∞2 Example: 120/120 = 240 contacts t Contact type SV : Board vertical type
y Product Height VariationBlank : Standard (Minimum lot profile) 1:+1mm . . . . . . 3:+3mm
e Connector Type : P : Header S : Receptacle u J: two-piece connection product

\*The standard packaging of the two-piece connection product is the tray packaging.

A237

Page 3

BStacking Height Variation

Receptacle Header FX8C-S-SV FX8C-/**S11-SVJ FX8C-S-SV5 FX8C-/**S11-SV5J
FX8C-P-SV FX8C-/**P11-SVJ 5mm 10mm
FX8C-P-SV1 FX8C-/**P11-SV1J 6mm 11mm
FX8C-P-SV2 FX8C-/**P11-SV2J 7mm 12mm
FX8C-P-SV4 FX8C-/**P11-SV4J 9mm 14mm
FX8C-P-SV6 FX8C-/**P11-SV6J 11mm 16mm
PDF page 3 diagram

A238

Page 4

PDF page 4 diagram

IHeader (Single Product)

[FX8C-\*\*P-SV]

PDF page 4 diagram
Part Number CL No. Number of Contacts A B C D E Tube packaging Quantity (Pieces)
FX8C-060P-SV(**) 578-0501-9-** 60 24.60 23.00 20.70 17.40 22.20 21
FX8C-080P-SV(**) 578-0503-4-** 80 30.60 29.00 26.70 23.40 28.20 17
FX8C-100P-SV(**) 578-0505-0-** 100 36.60 35.00 32.70 29.40 34.20 14
FX8C-120P-SV(**) 578-0506-2-** 120 42.60 41.00 38.70 35.40 40.20 12
FX8C-140P-SV(**) 578-0507-5-** 140 48.60 47.00 44.70 41.40 46.20 10

\*\*Blank : Tray packaging product 21: Tube packaging product 22: Embossed tape packaging product Note1: To order the tube packaging product, please determine the quantity for delivery, multiplying the tube packaging product by an integer.

Note 2: The embossed tape packaging product is prepared for 60 and 80 contacts only. In addition, the product will be procured per reel unit. Please refer to the delivery form item on page A245 for details.

PDF page 4 diagram

[FX8C-\*\*P-SV1]

[FX8C-\*\*P-SV2]

[FX8C-\*\*P-SV4]

[FX8C-\*\*P-SV6]

PDF page 4 diagram

Unit: mm

Part Number CL No. Number of Contacts A B C D E F Tube packaging Quantity (Pieces)
FX8C-060P-SV1(**) 578-0521-6-** 60 24.60 23.00 20.70 17.40 22.20 5.45 21
FX8C-060P-SV2(**) 578-0541-3-** 6.45
FX8C-060P-SV4(**) 578-0581-8-** 8.45
FX8C-060P-SV6(**) 578-0601-3-** 10.45
FX8C-080P-SV1(**) 578-0523-1-** 80 30.60 29.00 26.70 23.40 28.20 5.45 17
FX8C-080P-SV2(**) 578-0543-9-** 6.45
FX8C-080P-SV4(**) 578-0583-3-** 8.45
FX8C-080P-SV6(**) 578-0603-9-** 10.45
FX8C-100P-SV1(**) 578-0525-7-** 100 36.60 35.00 32.70 29.40 34.20 5.45 14
FX8C-100P-SV2(**) 578-0545-4-** 6.45
FX8C-100P-SV4(**) 578-0585-9-** 8.45
FX8C-100P-SV6(**) 578-0605-4-** 10.45
FX8C-120P-SV1(**) 578-0526-0-** 120 42.60 41.00 38.70 35.40 40.20 5.45 12
FX8C-120P-SV2(**) 578-0546-7-** 6.45
FX8C-120P-SV4(**) 578-0586-1-** 8.45
FX8C-120P-SV6(**) 578-0606-7-** 10.45
FX8C-140P-SV1(**) 578-0527-2-** 140 48.60 47.00 44.70 41.40 46.20 5.45 10
FX8C-140P-SV2(**) 578-0547-0-** 6.45
FX8C-140P-SV4(**) 578-0587-4-** 8.45
FX8C-140P-SV6(**) 578-0607-0-** 10.45

\*\* Blank : Tray packaging product 21: Tube packaging product 22: Embossed tape packaging product Note1:To order the tube packaging product, please determine a quantity for delivery,multiplying the tube packaging product by an integer. Note2:The embossed tape packaging product is prepared for 60 and 80 contacts only. In addition, the product will be sold per reel unit. Please refer to the packaging specification item on page A245 for details. Note3:The locator material is installed between leads for the FX8C-P-SV6 type.

A239

Page 5

PDF page 5 diagram

IReceptacle (Single Product)

[FX8C-\*\*S-SV]

PDF page 5 diagram
Part Number CL No. Number of Contacts A B C D E Tube packaging Quantity (Pieces)
FX8C-060S-SV(**) 578-0801-2-** 60 24.60 23.05 20.80 17.40 22.20 21
FX8C-080S-SV(**) 578-0803-8-** 80 30.60 29.05 26.80 23.40 28.20 17
FX8C-100S-SV(**) 578-0805-3-** 100 36.60 35.05 32.80 29.40 34.20 14
FX8C-120S-SV(**) 578-0806-6-** 120 42.60 41.05 38.80 35.40 40.20 12
FX8C-140S-SV(**) 578-0807-9-** 140 48.60 47.05 44.80 41.40 46.20 10

\*\*Blank : Tray packaging product 21: Tube packaging product 22: Embossed tape packaging product Note1: To order the tube packaging product, please determine a quantity for delivery,multiplying the tube packaging product by an integer. Note2: The embossed tape packaging product is prepared for 60 and 80 contacts only. In addition, the product will be procured per reel unit. Please refer to the packaging specification item on page A245 for details.

PDF page 5 diagram

[FX8C-\*\*S-SV5]

PDF page 5 diagram
Part Number CL No. Number of Contacts A B C D E Tube packaging Quantity (Pieces)
FX8C-060S-SV5(**) 578-0821-0-** 60 24.60 23.05 20.80 17.40 22.20 21
FX8C-080S-SV5(**) 578-0823-5-** 80 30.60 29.05 26.80 23.40 28.20 17
FX8C-100S-SV5(**) 578-0825-0-** 100 36.60 35.05 32.80 29.40 34.20 14
FX8C-120S-SV5(**) 578-0826-3-** 120 42.60 41.05 38.80 35.40 40.20 12
FX8C-140S-SV5(**) 578-0827-6-** 140 48.60 47.05 44.80 41.40 46.20 10

\*\*Blank : Tray packaging product 21: Tube packaging product 22: Embossed tape packaging product Note1: To order the tube packaging product, please determine a quantity for delivery,multiplying the tube packaging product by an integer. Note2: The embossed tape package product is prepared for 60 and 80 contacts only. In addition, the product will be procured per reel unit. Please refer to the packaging specification item on page A245 for details.

BPCB mounting pattern

PDF page 5 diagram
PDF page 5 diagram

A240

Page 6

PDF page 6 diagram

IHeader (two-pieces Connection Product)

[FX8C-\*\*/\*\*P11-SVJ]

PDF page 6 diagram
Part Number CL No. Number of Contacts A B C D E F
FX8C-060/060P11-SVJ 578-0651-1 60∞2 31.70 24.70 23.00 20.70 17.40 22.20
FX8C-080/080P11-SVJ 578-0653-7 80∞2 37.70 30.70 29.00 26.70 23.40 28.20
FX8C-100/100P11-SVJ 578-0655-2 100∞2 43.70 36.70 35.00 32.70 29.40 34.20
FX8C-120/120P11-SVJ 578-0656-5 120∞2 49.70 42.70 41.00 38.70 35.40 40.20
FX8C-140/140P11-SVJ 578-0657-8 140∞2 55.70 48.70 47.00 44.70 41.40 46.20

Note: The two-piece connection product is packaged by tray.

PDF page 6 diagram

[FX8C-\*\*/\*\*P11-SV1J]

[FX8C-\*\*/\*\*P11-SV2J]

[FX8C-\*\*/\*\*P11-SV4J]

[FX8C-\*\*/\*\*P11-SV6J]

PDF page 6 diagram

Unit: mm

Part Number CL No. Number of Contacts A B C D E F G H
FX8C-060/060P11-SV1J 578-0671-9 60∞2 31.70 24.70 23.00 20.70 17.40 22.20 4.35 5.45
FX8C-060/060P11-SV2J 578-0691-6 5.35 6.45
FX8C-060/060P11-SV4J 578-0731-9 7.35 8.45
FX8C-060/060P11-SV6J 578-0751-6 9.35 10.45
FX8C-080/080P11-SV1J 578-0673-4 80∞2 37.70 30.70 29.00 26.70 23.40 28.20 4.35 5.45
FX8C-080/080P11-SV2J 578-0693-1 5.35 6.45
FX8C-080/080P11-SV4J 578-0733-4 7.35 8.45
FX8C-080/080P11-SV6J 578-0753-1 9.35 10.45
FX8C-100/100P11-SV1J 578-0675-0 100∞2 43.70 36.70 35.00 32.70 29.40 34.20 4.35 5.45
FX8C-100/100P11-SV2J 578-0695-7 5.35 6.45
FX8C-100/100P11-SV4J 578-0735-0 7.35 8.45
FX8C-100/100P11-SV6J 578-0755-7 9.35 10.45
FX8C-120/120P11-SV1J 578-0676-2 120∞2 49.70 42.70 41.00 38.70 35.40 40.20 4.35 5.45
FX8C-120/120P11-SV2J 578-0696-0 5.35 6.45
FX8C-120/120P11-SV4J 578-0736-2 7.35 8.45
FX8C-120/120P11-SV6J 578-0756-0 9.35 10.45
FX8C-140/140P11-SV1J 578-0677-5 140∞2 55.70 48.70 47.00 44.70 41.40 46.20 4.35 5.45
FX8C-140/140P11-SV2J 578-0697-2 5.35 6.45
FX8C-140/140P11-SV4J 578-0737-5 7.35 8.45
FX8C-140/140P11-SV6J 578-0757-2 9.35 10.45

Note1: The two-piece connection product is packaged by tray. Note2: The locator material is installed between leads for the FX8C-\*\*/\*\*P1-SV6J type.

A241

Page 7

IReceptacle (two-piece Connection Product)

PDF page 7 diagram

[FX8C-\*\*/\*\*S11-SVJ]

PDF page 7 diagram
Part Number CL No. Number of Contacts A B C D E F
FX8C-060/060S11-SVJ 578-0901-7 60∞2 31.70 24.60 23.05 20.80 17.40 22.20
FX8C-080/080S11-SVJ 578-0903-2 80∞2 37.70 30.60 29.05 26.80 23.40 28.20
FX8C-100/100S11-SVJ 578-0905-8 100∞2 43.70 36.60 35.05 32.80 29.40 34.20
FX8C-120/120S11-SVJ 578-0906-0 120∞2 49.70 42.60 41.05 38.80 35.40 40.20
FX8C-140/140S11-SVJ 578-0907-3 140∞2 55.70 48.60 47.05 44.80 41.40 46.20
Note: The two-piece connection product is packaged by tray. [FX8C-/S11-SV5J] Unit:mm
Part Number CL No. Number of Contacts A B C D E F
FX8C-060/060S11-SV5J 578-0921-4 60∞2 31.70 24.60 23.05 20.80 17.40 22.20
FX8C-080/080S11-SV5J 578-0923-0 80∞2 37.70 30.60 29.05 26.80 23.40 28.20
FX8C-100/100S11-SV5J 578-0925-5 100∞2 43.70 36.60 35.05 32.80 29.40 34.20
FX8C-120/120S11-SV5J 578-0926-8 120∞2 49.70 42.60 41.05 38.80 35.40 40.20
FX8C-140/140S11-SV5J 578-0927-0 140∞2 55.70 48.60 47.05 44.80 41.40 46.20

Note: The two-piece connection product is packaged by tray.

BPCB mounting pattern

PDF page 7 diagram
PDF page 7 diagram

A242

Page 8

BDetailed Figure After Joint Removal

(Single Product in two-piece Connection Product)

PDF page 8 diagram
PDF page 8 diagram

A243

Page 9

BConnector Precautions

1. Tolerance Clearance on Mating Side

The effective contact length of the product is set to 2.0mm. Please use the product so as to set to less than 12mm the clearance between the header and the receptacle in the mating process..

2. Fixation Between Mounting Boards

If this product is fixed only by mating force, Please consider the fixing method so as not to apply loads such as vibration, shock and so on.

3. Stacking General Tolerance in Mating

+0.3

Stack Amm

A mm –0.2

Note: Please Note that the above tolerance of the stacking height doesn't include the solder paste thickness.

4. Handling Two-piece Connection Product

Both joint bar edges of the two-piece connection product are fixed by joints, while the mating process can't be performed in that state. Before the mating process, please remove the joint bars as if pull it up. (Don't remove the joint bars before mounting on the board. )

PDF page 9 diagram
PDF page 9 diagram
PDF page 9 diagram

Before removing joint bar

5. Mounting Temperature Profile (Reference)

Applicable Conditions

PDF page 9 diagram

Reflow system Solder

Test board Metal mask thickness

After removing joint bar

:IR reflow :Paste type 63 Sn/37 Pb (Flux content 11 wt%) :Glass epoxy 161mm x 100mm x 1.6 mm :0.15 mm

Recommended temperature profile. The temperature may be slightly changed according to the solder paste type and amount.

6. Cautions

This product is made as the thin formed product in order to be miniaturized.

PDF page 9 diagram
PDF page 9 diagram

A244

Page 10

BPackaging Type

PDF page 10 diagram

A245

Page 11

[Embossed Tape Package]

PDF page 11 diagram

GCarrier Size Pattern

Unit: mm

P/S Part Number A B C D E Product Pieces
Header FX8C-**P-SV0 (22) 5.5 7.9 5.2 1.2 Ø370 1000 pieces
FX8C-**P-SV1 (22) 5.5 7.9 6.2 1.2 Ø370 1000 pieces
FX8C-**P-SV2 (22) 5.5 7.9 7.2 1.2 Ø330 0500 pieces
FX8C-**P-SV4 (22) 5.5 7.9 9.2 1.2 Ø370 0500 pieces
FX8C-**P-SV6 (22) 5.5 7.9 11.2 1.2 Ø370 0500 pieces
Receptacle FX8C-**S-SV0 (22) 6.0 8.4 4.3 1.2 Ø330 1000 pieces
FX8C-**S-SV5 (22) 6.0 8.4 9.3 1.2 Ø370 0500 pieces

\*\* : Number of Contacts

PDF page 11 diagram

A246