FX4C-20P-1.27DSA HIROSE

Document overview

  • PDF pages: 17

Technical content

Page 1

PDF page 1 diagram
PDF page 1 diagram
PDF page 1 diagram

IFeatures

The FX4 series is a miniature board to board connectors, where the stacking height can be set at the 1mm interval. According to the mounting method, you can select the product from the through hole type and SMT type.

GThrough hole Type 1. Small and Light

The mounting space and weight is reduced about 30%, compared to the conventional product (HRS FX2 series), respectively, and the mounting area about 70% reduced, compared to the conventional one.

2. Stacking Height 5 to 11mm

The board to board stacking height can be set per 1mm from 5mm up to 11mm.

3. Flux Swell Prevention

When solder is dipped, the flux swell from the board rear side is completely prevented.

4. Mis-insertion Prevention and Low

Insertion/Extraction Force Mechanism

The connection area is designed to completely prevent the mis-insertion. Moreover, the low insertion/extraction mechanism is adopted.

IApplications

Computers, peripheral equipments, business equipments, etc.

GSMT Type 1. Small and Light

The mounting space and weight is reduced about 40%, compared with the conventional product (HRS FX2 series), and the mounting area is reduced 80%, compared to the conventional one.

2. Stacking Height 6 to 11mm

The board to board stacking height can be set per 1mm from 6mm up to 11mm. In addition, the height can be also set in combination with the through hole type.

3. Mis-insertion Prevention and Low

Insertion/Extraction Structure

The connection area is designed to completely prevent the mis-insertion. Moreover, the low insertion/extraction force mechanism is adopted.

4. Positioning Boss Selectable

According to the mounting condition, it is selected whether or not the boss is required. Regarding the boss attached type, the boss eccentric position can stabilize the mounting direction.

A189

Page 2

IProduct Specifications

Rating Current rating 0.5A Voltage rating 125V AC Operating Temperature Range -55ç to +85ç (Note 1) Operating Humidity Range 40% to 80% Storage Temperature Range -10ç to +60ç (Note 2) Storage Humidity Range 40% to 70%
Item Specification Condition
1. Insulation Resistance 100M ohms min. Measured at 250V PC
2. Withstanding Voltage No flashover or insulation breakdown. 300V AC for 1 minute
3. Resistance 45m ohms max. 100mA
4. Vibration No electrical discontinuity of 1µs or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
5. Humidity (Steady state) Contact resistance: 55m ohms max. Insulation resistance: 100M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95%
6. Temperature Cycle Contact resistance : 55m ohms max. Insulation resistance : 100M ohms min. (-55ç: 30 minutes 15 to 35ç: 2 to 3 minutes (-85ç: 30 minutes 15 to 35ç: 2 to 3minutes) 5 cycles
7. Durability (Mating/un-mating) Contact resistance : 55m ohms max. 300 cycles
8. Resistance to Soldering heat No deformation of components affecting performance. Reflow: At the recommended temperature profile Manual soldering: 300ç for 3 seconds

Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.

IMaterial

Part Material Finish Remarks
Insulator Polyamide Beige UL94V-0
Receptacle Contact Phosphor bronze Selective gold plated ________
Header Contact Selective gold plated ________

Note : The black dots on the insulater will not affect performance.

IOrdering Information

GDip Type

FX 4C 1 - 80 P - 1.27 DSA L

q w e

r t

y u i

q Series Name : FX t Connector Type P : Header S : Receptacle
w Series No. : 4C
e Product Height Variable:None: Standard 1: +1mm 2: +2mm 3: +3mm y Contact Pitch : 1.27mm
u Contact type DSA : Straight
r Number of Contacts: 20, 32, 40, 52, 60, 68, 80 i L: Board prefixed pin

GSMT Type

FX 4A H - 80 P - 1.27 SV

q w e

r t y u

q Series Name : FX r Number of Contacts : 20, 32, 40, 52, 60, 68, 80
w Series No. : 4A : With boss 4B : Without boss t Connector Type P : Header S : Receptacle
e Product Height Variable H : +0.5mm 1 : +1mm e (Ratio to dip type standard product) 2 : +2mm 3 : +3mm y Contact Pitch : 1.27mm
u Contact type SV : Vertical type

A190

Page 3

BApplication Pattern and Stacking Height Combination

PDF page 3 diagram

Unit: mm

Receptacle Header FX4C -*S (Catalog page A195) FX4C2-*S (Catalog page A196) FX4C3-*S (Catalog page A197)
FX4C -*P (Catalog page A192) 5 7 8
FX4C1-*P (Catalog page A193) 6 8 9
FX4C3-*P (Catalog page A194) 8 10 11
PDF page 3 diagram
  • The stacking height 6mm follows the diagonal

diagram as shown below.

FX4AH-\*P

FX4AH-\*S

FX4BH-\*P

FX4BH-\*S

  • The stacking height 7mm to 11mm follows the table

as shown below.

Unit:mm

Receptacle Header FX4A1-*S (Catalog page A202) FX4A2-*S (Catalog page A203) FX4A3-*S (Catalog page A204)
FX4B1-*S (Catalog page A202) FX4B2-*S (Catalog page A203) FX4B3-*S (Catalog page A204)
FX4A1-*P (Catalog page A199) 7 8 9
FX4B1-*P (Catalog page A199)
FX4A3-*P (Catalog page A200) 9 10 11
FX4B3-*P (Catalog page A200)
PDF page 3 diagram

Unit:mm

Receptacle Header FX4A1-*S (Catalog page A202) FX4A2-*S (Catalog page A203) FX4A3-*S (Catalog page A204)
FX4B1-*S (Catalog page A202) FX4B2-*S (Catalog page A203) FX4B3-*S (Catalog page A204)
FX4C -*P (Catalog page A192) 6 7 8
FX4C1-*P (Catalog page A193) 7 8 9
FX4C3-*P (Catalog page A194) 9 10 11
Receptacle Header FX4A1-*P (Catalog page A199) FX4A3-*P (Catalog page A200)
FX4B1-*P (Catalog page A199) FX4B3-*P (Catalog page A203)
FX4C -*S (Catalog page A195) 6 8
FX4C2-*S (Catalog page A196) 8 10
FX4C3-*S (Catalog page A197) 9 11

The above stacking height doesn't include the solder paste thickness. Thus, please consider that the stacking height after the mounting process will be slightly higher than the conventional height.

A191

Page 4

IHeader (Through hole Type)-Stacking Height: Standard type

PDF page 4 diagram
PDF page 4 diagram

BPCB mounting pattern

PDF page 4 diagram

Unit: mm

Part Number CL No. Number of Contacts A B C D
FX4C-20P-1.27DSA 574-0001-0 20 21.87 14.58 11.43 ________
FX4C-20P-1.27DSAL 574-0051-9 20.32
FX4C-32P-1.27DSA 574-0002-3 32 29.49 22.2 19.05 ________
FX4C-32P-1.27DSAL 574-0052-1 27.94
FX4C-40P-1.27DSA 574-0003-6 40 34.57 27.28 24.13 ________
FX4C-40P-1.27DSAL 574-0053-4 33.02
FX4C-52P-1.27DSA 574-0004-9 52 42.19 34.9 31.75 ________
FX4C-52P-1.27DSAL 574-0054-7 40.64
FX4C-60P-1.27DSA 574-0005-1 60 47.27 39.98 36.83 ________
FX4C-60P-1.27DSAL 574-0055-0 45.72
FX4C-68P-1.27DSA 574-0006-4 68 52.35 45.06 41.91 ________
FX4C-68P-1.27DSAL 574-0056-2 50.8
FX4C-80P-1.27DSA 574-0007-7 80 59.97 52.68 49.53 ________
FX4C-80P-1.27DSAL 574-0057-5 58.42

A192

Page 5

IHeader (Through hole Type)-Stacking Height: Standard+1mm type

PDF page 5 diagram
PDF page 5 diagram

BPCB mounting pattern

PDF page 5 diagram

Unit: mm

Part Number CL No. Number of Contacts A B C D
FX4C1-20P-1.27DSA 574-0011-4 20 21.87 14.58 11.43 ________
FX4C1-20P-1.27DSAL 574-0061-2 20.32
FX4C1-32P-1.27DSA 574-0012-7 32 29.49 22.2 19.05 ________
FX4C1-32P-1.27DSAL 574-0062-5 27.94
FX4C1-40P-1.27DSA 574-0013-0 40 34.57 27.28 24.13 ________
FX4C1-40P-1.27DSAL 574-0063-8 33.02
FX4C1-52P-1.27DSA 574-0014-2 52 42.19 34.9 31.75 ________
FX4C1-52P-1.27DSAL 574-0064-0 40.64
FX4C1-60P-1.27DSA 574-0015-5 60 47.27 39.98 36.83 ________
FX4C1-60P-1.27DSAL 574-0065-3 45.72
FX4C1-68P-1.27DSA 574-0016-8 68 52.35 45.06 41.91 ________
FX4C1-68P-1.27DSAL 574-0066-6 50.8
FX4C1-80P-1.27DSA 574-0017-0 80 59.97 52.68 49.53 ________
FX4C1-80P-1.27DSAL 574-0067-9 58.42

A193

Page 6

IHeader (Through hole Type)-Stacking Height: Standard+3mm type

PDF page 6 diagram
PDF page 6 diagram

BPCB mounting pattern

PDF page 6 diagram

Unit: mm

Part Number CL No. Number of Contacts A B C D
FX4C3-20P-1.27DSA 574-0031-1 20 21.87 14.58 11.43 ________
FX4C3-20P-1.27DSAL 574-0081-0 20.32
FX4C3-32P-1.27DSA 574-0032-4 32 29.49 22.2 19.05 ________
FX4C3-32P-1.27DSAL 574-0082-2 27.94
FX4C3-40P-1.27DSA 574-0033-7 40 34.57 27.28 24.13 ________
FX4C3-40P-1.27DSAL 574-0083-5 33.02
FX4C3-52P-1.27DSA 574-0034-0 52 42.19 34.9 31.75 ________
FX4C3-52P-1.27DSAL 574-0084-8 40.64
FX4C3-60P-1.27DSA 574-0035-2 60 47.27 39.98 36.83 ________
FX4C3-60P-1.27DSAL 574-0085-0 45.72
FX4C3-68P-1.27DSA 574-0036-5 68 52.35 45.06 41.91 ________
FX4C3-68P-1.27DSAL 574-0086-3 50.8
FX4C3-80P-1.27DSA 574-0037-8 80 59.97 52.68 49.53 ________
FX4C3-80P-1.27DSAL 574-0087-6 58.42

A194

Page 7

IReceptacle (Through hole Type)-Stacking Height: Standard type

PDF page 7 diagram
PDF page 7 diagram

BPCB mounting pattern

PDF page 7 diagram

Unit: mm

Part Number CL No. Number of Contacts A B C D
FX4C-20S-1.27DSA 574-0101-5 20 21.87 11.43 18.48 ________
FX4C-20S-1.27DSAL 574-0151-3 20.32
FX4C-32S-1.27DSA 574-0102-8 32 29.49 19.05 26.1 ________
FX4C-32S-1.27DSAL 574-0152-6 27.94
FX4C-40S-1.27DSA 574-0103-0 40 34.57 24.13 31.18 ________
FX4C-40S-1.27DSAL 574-0153-9 33.02
FX4C-52S-1.27DSA 574-0104-3 52 42.19 31.75 38.8 ________
FX4C-52S-1.27DSAL 574-0154-1 40.64
FX4C-60S-1.27DSA 574-0105-6 60 47.27 36.83 43.88 ________
FX4C-60S-1.27DSAL 574-0155-4 45.72
FX4C-68S-1.27DSA 574-0106-9 68 52.35 41.91 48.96 ________
FX4C-68S-1.27DSAL 574-0156-7 50.8
FX4C-80S-1.27DSA 574-0107-1 80 59.97 49.53 56.58 ________
FX4C-80S-1.27DSAL 574-0157-0 58.42

A195

Page 8

IReceptacle (Through hole Type)-Stacking Height: Standard+2mm type

PDF page 8 diagram
PDF page 8 diagram

BPCB mounting pattern

PDF page 8 diagram

Unit: mm

Part Number CL No. Number of Contacts A B C D
FX4C2-20S-1.27DSA 574-0121-2 20 21.87 11.43 18.48 ________
FX4C2-20S-1.27DSAL 574-0171-0 20.32
FX4C2-32S-1.27DSA 574-0122-5 32 29.49 19.05 26.1 ________
FX4C2-32S-1.27DSAL 574-0172-3 27.94
FX4C2-40S-1.27DSA 574-0123-8 40 34.57 24.13 31.18 ________
FX4C2-40S-1.27DSAL 574-0173-6 33.02
FX4C2-52S-1.27DSA 574-0124-0 52 42.19 31.75 38.8 ________
FX4C2-52S-1.27DSAL 574-0174-9 40.64
FX4C2-60S-1.27DSA 574-0125-3 60 47.27 36.83 43.88 ________
FX4C2-60S-1.27DSAL 574-0175-1 45.72
FX4C2-68S-1.27DSA 574-0126-6 68 52.35 41.91 48.96 ________
FX4C2-68S-1.27DSAL 574-0176-4 50.8
FX4C2-80S-1.27DSA 574-0127-9 80 59.97 49.53 56.58 ________
FX4C2-80S-1.27DSAL 574-0177-7 58.42

A196

Page 9

IReceptacle (Through hole Type)-Stacking Height: Standard+3mm type

PDF page 9 diagram
PDF page 9 diagram

BPCB mounting pattern

PDF page 9 diagram

Unit: mm

Part Number CL No. Number of Contacts A B C D
FX4C3-20S-1.27DSA 574-0131-6 20 21.87 11.43 18.48 ________
FX4C3-20S-1.27DSAL 574-0181-4 20.32
FX4C3-32S-1.27DSA 574-0132-9 32 29.49 19.05 26.1 ________
FX4C3-32S-1.27DSAL 574-0182-7 27.94
FX4C3-40S-1.27DSA 574-0133-1 40 34.57 24.13 31.18 ________
FX4C3-40S-1.27DSAL 574-0183-0 33.02
FX4C3-52S-1.27DSA 574-0134-4 52 42.19 31.75 38.8 ________
FX4C3-52S-1.27DSAL 574-0184-2 40.64
FX4C3-60S-1.27DSA 574-0135-7 60 47.27 36.83 43.88 ________
FX4C3-60S-1.27DSAL 574-0185-5 45.72
FX4C3-68S-1.27DSA 574-0136-0 68 52.35 41.91 48.96 ________
FX4C3-68S-1.27DSAL 574-0186-8 50.8
FX4C3-80S-1.27DSA 574-0137-2 80 59.97 49.53 56.58 ________
FX4C3-80S-1.27DSAL 574-0187-0 58.42

A197

Page 10

IHeader (SMT Type)-Stacking Height: Standard+0.5mm type

PDF page 10 diagram
PDF page 10 diagram

BPCB mounting pattern

PDF page 10 diagram

Unit: mm

Part Number CL No. Number of Contacts A B C D Positioning Boss
FX4AH-20P-1.27SV 574-0401-9 20 21.87 14.58 11.43 ________ No
FX4BH-20P-1.27SV 574-0201-0 18.07 Yes
FX4AH-32P-1.27SV 574-0402-1 32 29.49 22.2 19.05 ________ No
FX4BH-32P-1.27SV 574-0202-2 25.69 Yes
FX4AH-40P-1.27SV 574-0403-4 40 34.57 27.28 24.13 ________ No
FX4BH-40P-1.27SV 574-0203-5 30.77 Yes
FX4AH-52P-1.27SV 574-0404-7 52 42.19 34.9 31.75 ________ No
FX4BH-52P-1.27SV 574-0204-8 38.39 Yes
FX4AH-60P-1.27SV 574-0405-0 60 47.27 39.98 36.83 ________ No
FX4BH-60P-1.27SV 574-0205-0 43.47 Yes
FX4AH-68P-1.27SV 574-0406-2 68 52.35 45.06 41.91 ________ No
FX4BH-68P-1.27SV 574-0206-3 48.55 Yes
FX4AH-80P-1.27SV 574-0407-5 80 59.97 52.68 49.53 ________ No
FX4BH-80P-1.27SV 574-0207-6 56.17 Yes

A198

Page 11

IHeader (SMT Type)-Stacking Height: Standard+1mm type

PDF page 11 diagram
PDF page 11 diagram

BPCB mounting pattern

PDF page 11 diagram

Unit: mm

Part Number CL No. Number of Contacts A B C D Positioning Boss
FX4A1-20P-1.27SV 574-0411-2 20 21.87 14.58 11.43 ________ No
FX4B1-20P-1.27SV 574-0211-3 18.07 Yes
FX4A1-32P-1.27SV 574-0412-5 32 29.49 22.2 19.05 ________ No
FX4B1-32P-1.27SV 574-0212-6 25.69 Yes
FX4A1-40P-1.27SV 574-0413-8 40 34.57 27.28 24.13 ________ No
FX4B1-40P-1.27SV 574-0213-9 30.77 Yes
FX4A1-52P-1.27SV 574-0414-0 52 42.19 34.9 31.75 ________ No
FX4B1-52P-1.27SV 574-0214-1 38.39 Yes
FX4A1-60P-1.27SV 574-0415-3 60 47.27 39.98 36.83 ________ No
FX4B1-60P-1.27SV 574-0215-4 43.47 Yes
FX4A1-68P-1.27SV 574-0416-6 68 52.35 45.06 41.91 ________ No
FX4B1-68P-1.27SV 574-0216-7 48.55 Yes
FX4A1-80P-1.27SV 574-0417-9 80 59.97 52.68 49.53 ________ No
FX4B1-80P-1.27SV 574-0217-0 56.17 Yes

A199

Page 12

IHeader (SMT Type)-Stacking Height: Standard+3mm type

PDF page 12 diagram
PDF page 12 diagram

BPCB mounting pattern

PDF page 12 diagram

Unit: mm

Part Number CL No. Number of Contacts A B C D Positioning Boss
FX4A3-20P-1.27SV 574-0431-0 20 21.87 14.58 11.43 ________ No
FX4B3-20P-1.27SV 574-0231-0 18.07 Yes
FX4A3-32P-1.27SV 574-0432-2 32 29.49 22.2 19.05 ________ No
FX4B3-32P-1.27SV 574-0232-3 25.69 Yes
FX4A3-40P-1.27SV 574-0433-5 40 34.57 27.28 24.13 ________ No
FX4B3-40P-1.27SV 574-0233-6 30.77 Yes
FX4A3-52P-1.27SV 574-0434-8 52 42.19 34.9 31.75 ________ No
FX4B3-52P-1.27SV 574-0234-9 38.39 Yes
FX4A3-60P-1.27SV 574-0435-0 60 47.27 39.98 36.83 ________ No
FX4B3-60P-1.27SV 574-0235-1 43.47 Yes
FX4A3-68P-1.27SV 574-0436-3 68 52.35 45.06 41.91 ________ No
FX4B3-68P-1.27SV 574-0236-4 48.55 Yes
FX4A3-80P-1.27SV 574-0437-6 80 59.97 52.68 49.53 ________ No
FX4B3-80P-1.27SV 574-0237-7 56.17 Yes

A200

Page 13

IReceptacle (SMT Type)-Stacking Height: Standard+0.5mm type

PDF page 13 diagram
PDF page 13 diagram

BPCB mounting pattern

PDF page 13 diagram

Unit: mm

Part Number CL No. Number of Contacts A B C D Positioning Boss
FX4AH-20S-1.27SV 574-0501-3 20 21.87 11.43 18.48 ________ No
FX4BH-20S-1.27SV 574-0301-4 18.07 Yes
FX4AH-32S-1.27SV 574-0502-6 32 29.49 19.05 26.1 ________ No
FX4BH-32S-1.27SV 574-0302-7 25.69 Yes
FX4AH-40S-1.27SV 574-0503-9 40 34.57 24.13 31.18 ________ No
FX4BH-40S-1.27SV 574-0303-0 30.77 Yes
FX4AH-52S-1.27SV 574-0504-1 52 42.19 31.75 38.8 ________ No
FX4BH-52S-1.27SV 574-0304-2 38.39 Yes
FX4AH-60S-1.27SV 574-0505-4 60 47.27 36.83 43.88 ________ No
FX4BH-60S-1.27SV 574-0305-5 43.47 Yes
FX4AH-68S-1.27SV 574-0506-7 68 52.35 41.91 48.96 ________ No
FX4BH-68S-1.27SV 574-0306-8 48.55 Yes
FX4AH-80S-1.27SV 574-0507-0 80 59.97 49.53 56.58 ________ No
FX4BH-80S-1.27SV 574-0307-0 56.17 Yes

A201

Page 14

IReceptacle (SMT Type)-Stacking Height: Standard+1mm type

PDF page 14 diagram
PDF page 14 diagram

BPCB mounting pattern

PDF page 14 diagram

Unit: mm

Part Number CL No. Number of Contacts A B C D Positioning Boss
FX4A1-20S-1.27SV 574-0511-7 20 21.87 11.43 18.48 ________ No
FX4B1-20S-1.27SV 574-0311-8 18.07 Yes
FX4A1-32S-1.27SV 574-0512-0 32 29.49 19.05 26.1 ________ No
FX4B1-32S-1.27SV 574-0312-0 25.69 Yes
FX4A1-40S-1.27SV 574-0513-2 40 34.57 24.13 31.18 ________ No
FX4B1-40S-1.27SV 574-0313-3 30.77 Yes
FX4A1-52S-1.27SV 574-0514-5 52 42.19 31.75 38.8 ________ No
FX4B1-52S-1.27SV 574-0314-6 38.39 Yes
FX4A1-60S-1.27SV 574-0515-8 60 47.27 36.83 43.88 ________ No
FX4B1-60S-1.27SV 574-0315-9 43.47 Yes
FX4A1-68S-1.27SV 574-0516-0 68 52.35 41.91 48.96 ________ No
FX4B1-68S-1.27SV 574-0316-1 48.55 Yes
FX4A1-80S-1.27SV 574-0517-3 80 59.97 49.53 56.58 ________ No
FX4B1-80S-1.27SV 574-0317-4 56.17 Yes

A202

Page 15

IReceptacle (SMT Type)-Stacking Height: Standard+2mm type

PDF page 15 diagram
PDF page 15 diagram

BPCB mounting pattern

PDF page 15 diagram

Unit: mm

Part Number CL No. Number of Contacts A B C D Positioning Boss
FX4A2-20S-1.27SV 574-0521-0 20 21.87 11.43 18.48 ________ No
FX4B2-20S-1.27SV 574-0321-1 18.07 Yes
FX4A2-32S-1.27SV 574-0522-3 32 29.49 19.05 26.1 ________ No
FX4B2-32S-1.27SV 574-0322-4 25.69 Yes
FX4A2-40S-1.27SV 574-0523-6 40 34.57 24.13 31.18 ________ No
FX4B2-40S-1.27SV 574-0323-7 30.77 Yes
FX4A2-52S-1.27SV 574-0524-9 52 42.19 31.75 38.8 ________ No
FX4B2-52S-1.27SV 574-0324-0 38.39 Yes
FX4A2-60S-1.27SV 574-0525-1 60 47.27 36.83 43.88 ________ No
FX4B2-60S-1.27SV 574-0325-2 43.47 Yes
FX4A2-68S-1.27SV 574-0526-4 68 52.35 41.91 48.96 ________ No
FX4B2-68S-1.27SV 574-0326-5 48.55 Yes
FX4A2-80S-1.27SV 574-0527-7 80 59.97 49.53 56.58 ________ No
FX4B2-80S-1.27SV 574-0327-8 56.17 Yes

A203

Page 16

IReceptacle (SMT Type)-Stacking Height: Standard+3mm type

PDF page 16 diagram
PDF page 16 diagram

BPCB mounting pattern

PDF page 16 diagram

Unit: mm

Part Number CL No. Number of Contacts A B C D Positioning Boss
FX4A3-20S-1.27SV 574-0531-4 20 21.87 11.43 18.48 ________ No
FX4B3-20S-1.27SV 574-0331-5 18.07 Yes
FX4A3-32S-1.27SV 574-0532-7 32 29.49 19.05 26.1 ________ No
FX4B3-32S-1.27SV 574-0332-8 25.69 Yes
FX4A3-40S-1.27SV 574-0533-0 40 34.57 24.13 31.18 ________ No
FX4B3-40S-1.27SV 574-0333-0 30.77 Yes
FX4A3-52S-1.27SV 574-0534-2 52 42.19 31.75 38.8 ________ No
FX4B3-52S-1.27SV 574-0334-3 38.39 Yes
FX4A3-60S-1.27SV 574-0535-5 60 47.27 36.83 43.88 ________ No
FX4B3-60S-1.27SV 574-0335-6 43.47 Yes
FX4A3-68S-1.27SV 574-0536-8 68 52.35 41.91 48.96 ________ No
FX4B3-68S-1.27SV 574-0336-9 48.55 Yes
FX4A3-80S-1.27SV 574-0537-0 80 59.97 49.53 56.58 ________ No
FX4B3-80S-1.27SV 574-0337-1 56.17 Yes

A204

Page 17

BConnector Precautions

1. Tolerance Clearance on Mating Side

The effective connecting length of the product is set to

PDF page 17 diagram

1.5mm. Please use the product to specify the clearance between the header and the receptacle in the connection process within 1mm.

2. Prefixed Process to Board (Through hole Type)

PDF page 17 diagram

If the prefixed work is required for mounting on the board, please use the prefixed pin type. (Applicable board thickness t = 1.6±0.1)

PDF page 17 diagram

Applicable Conditions Reflow system Solder

Test board

Cautions:When the connector is installed in the board, the dip post is guided into the board through-hole in order to prevent the dip post breakage, and then insert the board in parallel to the connector so as to push in the prefixed pin.

: IR reflow : Paste type 63 Sn/37 Pb (Flux content 11 wt%) : Glass epoxy 110mm x 40mm x 0.8 mm Metal mask thickness: 0.2 mm

Recommended temperature profile. The temperature may be slightly changed according to the solder paste type and amount.

In addition, the temperature profile as shown left will be variable in 5% less or more according to number of contacts, height or other factors.

Note: The heat-proof cover is also equipped on the header side.

A205