FST OHMITE

Document overview

  • PDF pages: 1

Technical content

Page 1

FST Series

Thin Film Temperature Sensor

PDF page 1 diagram

S e r i e s S p e c i f i c at i o n s

Nom. Resistance

Tolerance

Model

(ohms)

Class

FST08-B-100E 100

B

FST08-2B-100E 100

2B

FST08-B-500E 500

B

FST08-2B-500E 500

2B

FST08-B-1K0E 1000

B

FST08-2B-1K0E 1000

2B

Other tolerances and values of resistance are available on request. Resistance taken at 0°C

d i m e n s i o n s

(mm)

PDF page 1 diagram

1.35mm ±.15

0.4mm ±.05

o r d e r i n g i n f o r m at i o n

F S T 0 8 - 2 B - 1 0 0 R E

Series

Tolerance Resistance RoHS value Compliant

rev 12/17-2

The FST series design positions the contact surfaces

on the side with the active measuring layer. This

design produces a sensor in position for face-down

mounting. This mounting optimizes current trends in

the ‘adhesion instead of soldering’ electronics sec-

tor. Using conductive adhesives provides reliable and

cost-effective connection to the circuit board and

is an alternative to the conventional reflow or wave

soldering. The FST series is available in 2 tolerance

classes, 0.12% and 0.24% per the DIN EN 60751

specification. Both tolerance classes are available in

the three resistance levels of the FST series.

c h a r a c t e r i s t i c s

Specification DIN EN 60751 Tolerance Class B (R0: ± 0.12 %), Class 2B (R0: ± 0.24 %)

Temperature range -50 °C to 170 °C Temp. coefficient TCR = 3850 ppm/K Contact AgPd metallising in thick-film technology

Long-term stability R0 drift ≤ 0.06 % after 1000 h at 170°C Ambient conditions Use unprotected only in dry environments Insulation resis- > 100 MW at 20°C; > 2 MW at 170°C (glass tance cover) Measuring current 100 W: 0.3 to 1.0 mA

500 W: 0.1 to 0.7 mA 1000 W: 0.1 to 0.3 mA (self heating has to be considered)

Self heating 0.8 K/mW at 0°C Reaction time Flowing water (v = 0.4 m/s): t0.5 = 0.10 s, t0.9

= 0.25 s

Air flow (v = 2 m/s): t0.5 = 2.5 s, t0.9 = 8.0 s

Processing infor- • Reflow soldering or wave soldering, e.g. mation double wave soldering < 8 s / 235°

  • Also can be mounted using SMD insertion machines with Ag conductive adhesive.
  • When mounting PCB circuits, the expansion relationship of the sensor and the substrate material must be taken into account.

Storage life Stored in a nitrogen atmosphere, min. 9

months Packaging "Face-down" in blister reel, 1000 pcs / reel

1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com