FRT RFE
Document overview
- PDF pages: 3
Technical content
Page 1
| NO. | PQ15-101E | |||
| Product Specification and Approval Sheet | Version | 1 | Page | 1/3 |
Radial Leaded PTC Resettable Fuse: FRT Series
1. Summary
(a) RoHS Compliant (Lead Free) Product (b) Applications: IEEE 1394 FireWire, Computers & Consumer electronics (c) Product Features: Fast trip time, Lower Trip-to-hold Ratio, Radial-leaded product
Product Features: ideal for up to 36VDC
(d) Operation Current: 0.50A~2.50A (e) Maximum Voltage: 36VDC (f) Temperature Range: -40℃ to 85℃
2. Agency Recognition
UL: File No. E211981 C-UL: File No. E211981 TÜV: File No. R50004084
3. Electrical Characteristics (23℃)
| Part Number | Hold Current | Trip Current | Max. Time to Trip | Max. Current | Rated Voltage | Typ. Power | Resistance | |
|---|---|---|---|---|---|---|---|---|
| R MIN | R1 MAX | |||||||
| I , A H | I , A T | at 5XI H, s | I , A MAX | V , V MAX DC | Pd, W | Ohm | Ohm | |
| FRT050-33F | 0.50 | 1.10 | 5.0 | 40 | 36 | 0.67 | 0.140 | 0.448 |
| FRT075-33F | 0.75 | 1.50 | 4.0 | 40 | 36 | 0.71 | 0.115 | 0.368 |
| FRT090-33F | 0.90 | 1.80 | 3.5 | 40 | 36 | 0.74 | 0.090 | 0.288 |
| FRT120-33F | 1.20 | 2.30 | 3.5 | 40 | 36 | 0.78 | 0.074 | 0.180 |
| FRT135-33F | 1.35 | 2.50 | 4.5 | 40 | 36 | 0.84 | 0.059 | 0.143 |
| FRT160-33F | 1.60 | 2.75 | 4.5 | 40 | 36 | 0.86 | 0.041 | 0.131 |
| FRT190-33F | 1.90 | 3.00 | 3.5 | 40 | 36 | 0.90 | 0.045 | 0.092 |
| FRT220-33F | 2.20 | 3.50 | 6.5 | 40 | 36 | 0.95 | 0.025 | 0.080 |
| FRT250-33F | 2.50 | 4.00 | 8.0 | 40 | 36 | 0.99 | 0.020 | 0.064 |
IH=Hold current-maximum current at which the device will not trip at 23℃ still air. IT=Trip current-minimum current at which the device will always trip at 23℃ still air. VMAX=Maximum voltage device can withstand without damage at its rated current. IMAX= Maximum fault current device can withstand without damage at rated voltage (VMAX). Pd=Typical power dissipated from device when in tripped state in 23℃ still air environment. RMIN=Minimum device resistance at 23℃. R1MAX=Maximum device resistance at 23℃, 1 hour after tripping. Physical specifications: Lead material: Tin plated copper clad steel, 24 AWG. Soldering characteristics: MIL-STD-202, Method 208E.
Insulating coating: Flame retardant epoxy, meets UL-94V-0 requirement.
Page 2
| NO. | PQ15-101E | |||
| Product Specification and Approval Sheet | Version | 1 | Page | 2/3 |
4. Production Dimensions (millimeter)

Lead Size: 24AWG
φ0.51 mm Diameter
| Part Number | A | B | C | D | E | F |
|---|---|---|---|---|---|---|
| Maximum | Maximum | Typical | Minimum | Maximum | Typical | |
| FRT050-33F | 7.4 | 12.2 | 5.1 | 7.6 | 3.0 | 1.1 |
| FRT075-33F | 7.4 | 12.2 | 5.1 | 7.6 | 3.0 | 1.1 |
| FRT090-33F | 7.4 | 12.2 | 5.1 | 7.6 | 3.0 | 1.1 |
| FRT120-33F | 7.4 | 12.2 | 5.1 | 7.6 | 3.0 | 1.1 |
| FRT135-33F | 7.4 | 14.2 | 5.1 | 7.6 | 3.0 | 1.1 |
| FRT160-33F | 7.4 | 14.0 | 5.1 | 7.6 | 3.0 | 1.1 |
| FRT190-33F | 9.0 | 13.5 | 5.1 | 7.6 | 3.0 | 1.1 |
| FRT220-33F | 10.0 | 17.0 | 5.1 | 7.6 | 3.0 | 1.1 |
| FRT250-33F | 10.0 | 19.5 | 5.1 | 7.6 | 3.0 | 1.1 |
5. Thermal Derating Curve

Page 3
| NO. | PQ15-101E | |||
| Product Specification and Approval Sheet | Version | 1 | Page | 3/3 |
6. Typical Time-to-Trip at 23℃

A= FRT050-33F
B= FRT075-33F
C= FRT090-33F
D= FRT120-33F
E= FRT135-33F
F= FRT160-33F
G= FRT190-33F
H= FRT220-33F
I = FRT250-33F
7. Material Specification
Lead material: Tin plated copper clad steel, 24 AWG.
Soldering characteristics: MIL-STD-202, Method 208E.
Insulating coating: Flame retardant epoxy, meets UL-94V-0 requirement.
8. Part Numbering and Marking System
Part Numbering System Part Marking System
F R T □ □ □ ─ □ □ F
F Fuzetec Logo F

RoHS Compliant / Lead Free
RT135F
Voltage Rating
91AB
Current Rating
Example
□ □ □ □
Note: Font on Marking may look slightly different due to fine turnings of each Marking printer.
Warning: - Each product should be carefully evaluated and tested for their suitability of application.
RoHS Compliant / Lead Free Part Identification Product Family
Date Code / Lot Number
- Operation beyond the specified maximum rating or improper use may result in damage and possible electrical arcing and/or flame. - PPTC device are intended for occasional overcurrent protection. Application for repeated overcurrent condition and/or prolonged trip are not anticipated. - Avoid contact of PPTC device with chemical solvent, including some inert material such as silicone based oil, lubricant and etc. Prolonged contact will damage the device performance. - Additional protection mechanism are strongly recommended to be used in conjunction with the PPTC device for protection against abnormal or failure conditions. - Avoid use of PPTC device in a constrained space such as potting material, housing and containers where have limited space to
accommodate device thermal expansion and/or contraction.