MMA25312B NXP
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 10
Technical content
Features
Frequency: 2300- -2700 MHz P1dB: 31 dBm @ 2500 MHz Power Gain: 26 dB @ 2500 MHz Third Order Output Intercept Point: 40 dBm @ 2500 MHz Active Bias Control (On- -chip) Single 3 to 5 V Supply Single- -ended Power Detector Cost- -effective 12- -pin, 3 mm QFN Surface Mount Plastic Package In Tape and Reel. T1 Suffix = 1,000 Units, 12 mm Tape Width, 7- -inch Reel. Table 1. Typical CW Performance(1)
- VCC1 =V CC2 =V BIAS =5V d c ,TA =2 5C, 50 ohm system, CW
Table 2. Maximum Ratings Table 3. Thermal Characteristics Select Documentation/Application Notes - - AN1955. Freescale Semiconductor, Inc., 2012- -2014.All rights reserved.
Freescale Semiconductor, Inc. Table 4. Electrical Characteristics(VCC1 =V CC2 =V BIAS = 5 Vdc, 2500 MHz, TA =2 5C, 50 ohm system, in Freescale CW Application Table 5. ESD Protection Characteristics Table 6. Moisture Sensitivity Level Figure 1. Functional Block Diagram Figure 2. Pin Connections
Freescale Semiconductor, Inc. Figure 3. MMA25312BT1 Test Circuit Schematic — 2500 MHz, 5 Volt Operation Table 7. MMA25312BT1 Test Circuit Component Designations and Values — 2500 MHz, 5 Volt Operation Note: Component numbers C3, C4, C6, C10, C12, C15 and R3 are labeled on board but not placed. Note: Component L1 intentionally omitted.
Freescale Semiconductor, Inc. Figure 4. MMA25312BT1 Test Circuit Component Layout — 2500 MHz, 5 Volt Operation (1) VBIAS [Board] supplies VBA1,V BA2 and VBIAS [Device]. Note: Component L1 intentionally omitted.
Freescale Semiconductor, Inc. MMA25312BT1 PACKAGE DIMENSIONS
Freescale Semiconductor, Inc.
Freescale Semiconductor, Inc. MMA25312BT1
Freescale Semiconductor, Inc. PRODUCT DOCUMENTATION, SOFTWARE AND TOOLS Refer to the following resources to aid your design process. Application Notes AN1955: Thermal Measurement Methodology of RF Power Amplifiers AN3100: General Purpose Amplifier and MMIC Biasing Software .s2p File Development Tools Printed Circuit Boards For Software and Tools, do a Part Number search at http://www.freescale.com, and select the “Part Number” link. Go to Software & Tools on the part’s Product Summary page to download the respective tool. FAILURE ANALYSIS At this time, because of the physical characteristics of the part, failure analysis is limited to electrical signature analysis. In cases where Freescale is contractually obligated to perform failure analysis (FA) services, full FA may be performed by third party vendors with moderate success. For updates contact your local Freescale Sales Office.
REVISION HISTORY
The following table summarizes revisions to this document. Revision Date Description 0 Sept. 2012 Initial Release of Data Sheet 1 Mar. 2013 Added typical performance bullet and frequency table for WLAN (802.11g) and WiMAX (802.16e), p. 1 Table 7, Test Circuit Component Designations andValues - - 2500 MHz, 5 Volt Operation: updated R1 description from 430,1 / 1 6 Chip Resistor to 330, 1/16 W Chip Resistor and R1 part number from RC0402JR- -07430RL to RC0402JR- -07330RL. Updated R2 description from 1.6 k,1 / 1 6WC h i p Resistor to 1210, 1/16 W Chip Resistor and R2 part number from RC0402JR- -071K60L to RC0402JR- -071K21L to reflect WiMAX, WLAN circuit performance, pp. 3, 4 Removed Fig. 5, Test Circuit Schematic - - 2500 MHz,3.3 Volt Operation, Table 8, Test Circuit Component Designations and Values - - 2500 MHz, 3.3 Volt Operation and Fig. 6, Test Circuit Component Layout - - 2500 MHz, 3.3 Volt Operation, pp. 5, 6 2 Sept. 2014 Table 2, Maximum Ratings: updated Junction Temperature from 150C to 175C to reflect recent test results of the device, p. 1 Added Failure Analysis information, p. 9
Freescale Semiconductor, Inc. MMA25312BT1 Information in this document is provided solely to enablesystem and software implementers to use Freescale products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits based on the information in this document. Freescale reserves the right to make changes without further notice to any products herein. Freescale makes no warranty, representation, or guarantee regarding the suitability of its products for any particularpurpose, nor does Freescale assume any liability arisingout of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters that may be provided in Freescale data sheets and/or specifications can and do vary in different applications, and actual performance may vary over time. All operating parameters, including “typicals,” must be validated for each customer application by customer’s technical experts. Freescale does not convey any license under its patent rights nor the rights of others. Freescale sells products pursuant to standard terms and conditions of sale, which can be found at the following address: freescale.com/SalesTermsandConditions. Freescale and the Freescale logo are trademarks of Freescale Semiconductor, Inc., respective owners. E 2012- -2014 Freescale Semiconductor, Inc. How to Reach Us: Home Page: freescale.com Web Support: freescale.com/support Document Number: MMA25312B Rev. 2, 9/2014