DATASHEET SEARCH SITE
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
- Ultra-Fast Response Time
- Rugged, Unaffected by Severe Environmental Exposures
- Relatively Flat Frequency Response
- Ease of Handling
Applications
- Sub-Sea Monitoring
- High Speed Fluid Temperature Measurement & Control
- Industrial NTC Type FP07 Thermometrics Fastip Probe Thermistor Amphenol Advanced Sensors
Thermal and Electrical Properties The following table lists the thermal and electrical properties for all large ruggedized thermobeads. All definitions and test methods are per MIL-PRF-23648. Thermistor Type FP07 Maximum Diameter 0.085 in. (22 mm) Body Length 0.5 in. (12.7 mm) Lead Wires Nominal Diameter 0.012 in. (0.30 mm) Lead Length 0.875 in. (22 mm) Lead Material Tinned dumet Material System Code Letter R vs T Curve 25/125 Ratio Nominal Resistance Range (W) @ 77°F (25°C) E 0 5.0 - A 1 11.8 300 to 600 A 2 12.5 680 k to 1.6 k A 3 14.0 1.6 k to 3.6 k A 4 16.9 3.6 k to 6.8 k A 5 19.8 6.8 k to 27 k A 6 22.1 - A 7 22.7 27 k to 75 k B 8 29.4 75 k to 130 k B 9 30.8 130 k to 240 k B 10 32.3 240 k to 360 k B 11 35.7 360 k to 820 k B 12 38.1 820 k to 13 M B 13 45.0 1.3 M to 3.3 M B 14 48.1 3.3 M to 6.8 M B 15 56.5 6.8 M to 10 M D 16 75.6 - D 17 81.0 - Resistance vs temperature characteristics: The nominal resistance range for the zero-power resistance at 77°F (25°C) is shown for each thermobead type and each available material system. Each material system is denoted by an ordering code letter, a referenced curve number and the nominal 77°F/257°F (25°C/125°C) resistance ratio. NTC Type FP07 Dimensions Thermistor Time Constant FP07 Still Air at 77 °F (25°C) Plunge into Water 0.10 sec 7 msec Dissipation Constant Still Air at 77 °F (25°C) Still Water at 77 °F (25°C) 0.05 mW/°C 0.25 mW/°C Power Rating (in air) Maximum Power Rating 0.006 Watts
Ordering Information
The code number to be ordered may be specified as follows: Code Model Number FP 07 Code Probe Length D 0.5 (12.7 mm) (Other lengths available on special order) Code Material System Code X See Thermal and Electrical Properties table Code Zero Power Resistance
103 See note below*
Code Tolerance @ 77°F (25°C)** F 1 G 2 J 5 K 10 L 15 M 20 N 25 P 30 Q 40 R 50 S Non-standard (consult factory) *The zero-power resistance at 77°F (25°C), expressed in ohms (W), is identified by a three digit number. The first two digits represent significant figures and the last digit specifies the number of zeros to follow. Example: A Fastip probe with a 7 msec response time in water, 10 kW ±25% at 77°F (25°C) would be coded FP07DA103N. **Special tolerances are available on request. To specify a non-standard tolerance, use the letter ‘S’ followed by the desired tolerance (i.e., S7 = ±7%). AAS-920-267C-03/2014 www.amphenol-sensors.com © 2014 Amphenol Corporation. All Rights Reserved. Specifications are subject to change without notice. Other company names and product names used in this document are the registered trademarks or trademarks of their respective owners. Amphenol Advanced Sensors Maximum Diameter Ø 0.12 in. (0.3 mm) tinned dumet lead-wires 0.5 in. (12.7 mm) nominal 0.875 in. (22 mm) nominal *Longer leads available upon request.