FMR SCHURTER
Document overview
- PDF pages: 1
Technical content
Page 1
Fuseholder Blocks & Clips
Fuseholder Open Design, Holder for MSF 125, horizontal, THT

125 VAC · 5 A (UL/CSA)
Description
- Through hole mounting - Horizontal mount Standards - UL 512 - CSA C22.2 no. 39 Approvals - UL File Number: E39328
Technical Data Fuse-Link
Microfuse 125 V
Mounting
PCB
Terminal
Solder THT
Rated Voltage
125 VAC
Rated Current
5 A (UL/CSA)
Degree of Protection
IP 40
Admissible Ambient Air Temp. -40 °C to 85 °C Climatic Category
40/085/21 acc. to IEC 60068-1
Material: Socket
Thermoplastic, black, UL 94V-0
Material: Terminals
Silver-Plated Brass
Unit Weight (Socket/Cap)
0.34 g
Storage Conditions
0 °C to 60 °C, max. 70% r.h.
Product Marking
, Approvals
Abmessungen
11.3 mm

Variants Holder Order Number
0031.7505 l
Packaging Unit
Plastic Bag (100 pcs.)
FMR
www.schurter.com/pg02b
References General Product Information Fuseholder to MSF 125 Weblinks Approvals, RoHS, CHINA-RoHS, e-Store, Distributor-Stock-Check, Accessories, Product Change Notification (PCN)
Soldering Methods
Wave
Solderability
235 °C / 2 sec acc. to IEC 60068-2-20, Test Ta, method 1
Resistance to Soldering Heat 260 °C / 10 sec acc. to IEC 60068-2-20,
Test Tb, method 1A < 5 mΩ at 20 mV
Contact Resistance Dielectric Strength
3 kV between L-N (50 Hz; 1 min)
Impulse Withstand Voltage
4 kV between L-N > 10 MΩ between L-N
Insulation Resistance
(500 VDC; 1 min)
Overvoltage Category
I - III acc. to IEC 60664-1
Pollution Degree
1 - 3 acc. to IEC 60664-1
+0.1 1.3 0
2.54
Drilling diagram
The specifications, descriptions and illustrations indicated in this document are based on
Fuses
current information. All content is subject to modifications and amendments.