DATASHEET SEARCH SITE
Document overview
- PDF pages: 2
Technical content
Page 1


T.C.R.
INTRODUCTION
The FMP Series Metal Film High Power Resistors are manufactured using a vacuum sputtering system to deposit multiple layers of mixed metal alloys and passivative materials onto a carefully treated high grade ceramic substrate. After a helical groove has been cut in the resistive layer, tinned connecting leads of electrolytic copper are welded to the end-caps. The resistors are coated with layers of pink color lacquer.
DIMENSIONS
STYLE
FMP-50
FMP100

ød FMP200
FMP300
Through-hole resistors
High Power & Flame-Proof Type
Ultra Miniature Style [ FMP Series ]
FEATURES
Power Rating
1/2W, 1W, 2W, 3W,4W
Resistance Tolerance
±1%, ±5%
±100ppm/°C
Flameproof Multi-layer Coating Meets
UL-94V-0
Flameproof Feature Meets Overload Test
UL-1412
DERATING CURVE
For resistors operated in ambient temperatures above 70°C, power rating must be derated in accordance with the curve below.
70
155 °C
Rated Load (%)

Ambient Temperature (°C)
Unit: mm
DIMENSION
Ultra Miniature
L
øD
H
ød
3.4±0.3
1.9±0.2
28±2.0
0.45±0.05
6.3±0.5
2.4±0.2
28±2.0
0.55±0.05
9.0±0.5
3.9±0.3
26±2.0
0.55±0.05
FMP3WS
11.5±1.0
4.5±0.5
35±2.0
0.8±0.05
15.5±1.0
5.0±0.5
33±2.0
0.8±0.05
FMP4WV
17.0±1.0
7.5±0.5
32±2.0
0.8±0.05
Page 2
15

ELECTRICAL CHARACTERISTICS
STYLE
FMP-50
FMP100
FMP200
FMP3WS
FMP300
FMP4WV
Power Rating at 70°C
1/2W
1W
2W
3W
4W
Maximum Working Voltage
200V
350V
500V
750V
Maximum Overload Voltage
400V
600V
700V
1,000V
Voltage Proof on Insulation
300V
500V
1Ω - 10MΩ & 0Ω for E24 & E96 series value
Resistance Range
Operating Temp. Range
-55°C to +155°C
Temperature Coefficient
±100ppm/°C
Note: Special value is available on request
ENVIRONMENTAL CHARACTERISTICS
PERFORMANCE TEST
TEST METHOD
APPRAISE
IEC 60115-1 4.13 2.5 times RCWV for 5 Sec.
Short Time Overload
±0.5%+0.05Ω
in V-block for 60 Sec., test voltage by type
Voltage Proof on Insulation
IEC 60115-1 4.7
By type
Temperature Coefficient
IEC 60115-1 4.8
-55°C to +155°C
By type
in V-block for 60 Sec.
Insulation Resistance
IEC 60115-1 4.6
1,000MΩ
IEC 60115-1 4.17 235±5°C for 3±0.5 Sec.
Solderability
95% Min. coverage
No deterioration of
IEC 60115-1 4.30 IPA for 5±0.5 Min. with ultrasonic
Solvent Resistance of Marking
coatings and markings
IEC 60115-1 4.16 Direct load for 10 Sec. in the direction of the terminal leads
Robustness of Terminations
≥2.5kg (24.5N)
IEC 60115-1 4.39 4 times RCWV 10,000 cycles (1 Sec. on, 25 Sec. off)
Periodic-pulse Overload
±1.0%+0.05Ω
IEC 60115-1 4.24 40±2°C, 90-95% RH for 56 days, loaded with 0.1 times RCWV
Damp Heat Steady State
±2.0%+0.05Ω
IEC 60115-1 4.25 70±2°C at RCWV for 1,000 Hr. (1.5 Hr. on, 0.5 Hr. off)
Endurance at 70°C
±2.0%+0.05Ω
-55°C Room Temp. +155°C Room Temp. (5 cycles)
Temperature Cycling
IEC 60115-1 4.19
±1.0%+0.05Ω
IEC 60115-1 4.18 260±3°C for 10±1 Sec., immersed to a point 3±0.5mm from the body
Resistance to Soldering Heat
±0.25%+0.05Ω
No evidence of flaming
IEC 60115-1 4.26 4 times RCWV for 1 Min.
Accidental Overload Test
or arcing
Note: RCWV(Rated Continuous Working Voltage) = Power Rating x Resistance Value or Max. working voltage listed above, whichever less.
Revision: 201304