FM25 RFE

Document overview

  • PDF pages: 2

Technical content

Page 1

Fusible Flameproof Resistors

FM Series: Axial Leaded, Film

INTRODUCTION

The fusible resistor contains two functions in one package. It’s a resistor under normal conditions and a fuse (with a predictible fusing time) when subjected to higher than normal current.

FUSING CHARACTERISTICS

Power Fusing Time
Minimum Nominal Maximum
16 X Wattage 3 Sec. 30 Sec. 1 Min.
20 2 Sec. 15 Sec. 30 Sec.
24 1 Sec. 5 Sec. 10 Sec.
28 0.8 Sec. 3 Sec. 7 Sec.
32 0.8 Sec. 2 Sec. 4 Sec.
  • Fusing times not listed, may be available. Contact RFE International, Inc. for details.

SPECIFICATIONS

PDF page 1 diagram

FEATURES

  • High stability, accuracy, and reliability
  • Noncombustible coating
  • Uniform fusing time
  • Low temperature coefficient (350ppm/ )

o C

  • For wire wound version, see FKN

DERATING CURVE

PDF page 1 diagram

0

o C

WaƩage Type Dimension (mm) Resistance Range (Ω) Max. Working Voltage Dielectric Withstanding Voltage Std. Tolerance ± %
L ± 1.0 D ± 0.5 C ± 3 d ± 0.05
1/4W FM25 6.5 2.3 30 0.55 0.1~10K 200 250 5
1/2W FM50M 6.5 2.3 30 0.55 0.1~10K 200 250 5
1/2W FM50 9 3.2 30 0.65 0.1~10K 250 250 5
1W FM100M 9 3.2 30 0.65 0.1~10K 250 250 5
1W FM100 11.5 4.5 30 0.78 0.1~10K 300 350 5
2W FM200M 11.5 4.5 30 0.78 0.1~10K 250 350 5
2W FM200 15.5 5.0 30 0.78 0.1~10K 350 400 5
3W FM300M 15.5 5.0 30 0.78 0.1~10K 250 400 5
  • Standard tolerance is 5% and 10% for values below 0.5Ω.
PDF page 1 diagram

RFE International • Tel (949) 833-1988 • Fax (949) 833-1788 • E-mail sales@rfeinc.com

01-MAR-2023

Page 1 of 2

Page 2

Fusible Flameproof Resistors

FM Series: Axial Leaded, Film

ELECTRICAL PERFORMANCE

Test Items Condition Spec.
Operating Temperature 155
Resistance Temp. Coeff. 5
Short Time Overload
Insulation Resistance
Temperature Cycle to
Load Life
Moisture-Proof Load Life
Resistance to soldering Heat
Nonflammability

PACKAGING

PART NUMBER EXAMPLE

Packing Code Description
A Taped & Ammo
B Loose (Bulk)
C Cut & Form

FM 50 R - 10R - J

PDF page 2 diagram
PDF page 2 diagram

RESISTANCE CODE

Ohms 0.22 2.0 22 220 2.2K 10K
Code 0R22 2R0 22R 220R 2K2 10K

TOLERANCE

% 5 10
Code J K

MARKING

Resistors use the EIA 4 band marking with a fifth black band denoting a fusible resistor.

RFE International • Tel (949) 833-1988 • Fax (949) 833-1788 • E-mail sales@rfeinc.com

01-MAR-2023

Page 2 of 2