DATASHEET SEARCH SITE

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Series FB & SB Momentary Pushbuttons www.nkk.comC38 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries CPushbuttonsIlluminated PBSlides Programmable RockersTouch Tilt Toggles General Specifications FB Series Electrical Capacity (Resistive Load) Power Level: 500mA @ 125V AC for silver Logic Level: 0.4V A max. @ 28V AC/DC max. for gold Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Note: Find additional explanation in Supplement section. Other Ratings Contact Resistance: 30 milliohms maximum for silver; 30 milliohms maximum for gold Insulation Resistance: 100 megohms minimum @ 500V DC Dielectric Strength: 1,000V AC minimum between contacts & between contacts & case for 1 minute minimum Mechanical Life: 0,000 operations minimum Electrical Life: 50,000 operations minimum Nominal Operating Force: 2.16N Travel: Pretravel .043” (1.1mm) Over travel .022” (0.57mm) T otal Travel .065” (1.67mm) Materials & Finishes Plunger: Polyacetal Bushing: Brass with nickel plating Case: Phenolic resin Movable Contactor: Copper with silver or gold plating Stationar y Contacts: Phosphor bronze with silver or gold plating Terminals: Phosphor bronze with silver or gold plating Environmental & Installation Data Operating T emp Range: –10°C through +70°C (+14°F through +158°F) Soldering Time & Manual Soldering: T emperature: See Profile A in Supplement section. Standards & Certifications UL: File No. E44145 - Recognized only when ordered with marking on switch. A dd “/U” or “/CUL” before dash in part number to order UL recognized switch. Models rated 0.5A @ 125V AC Single pole; Momentar y action circuit with solder lug terminations. CSA: SB Series 3A @ 125V AC or 2A @ 250V AC or 2A @ 30V DC for silver 0.4VA max. @ 28V AC/DC max. for gold (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Note: Find explanation of operating range in Supplement section. 10 milliohms maximum for silver; 20 milliohms maximum for gold 200 megohms minimum @ 500V DC 1,000V AC minimum between contacts & between contacts & case for 1 minute minimum 30,000 operations minimum 10,000 operations minimum 4.90N Normally Open Total Travel .088” (2.24mm) Normally Closed Total Travel .088” (2.24mm) Phenolic resin Brass with nickel plating Phenolic resin Copper with silver or gold plating Copper with silver or gold plating Copper with silver or gold plating –10°C through +70°C (+14°F through +158°F) Manual Soldering: See Profile A in Supplement section. File No. E44145 - Recognized only when ordered with marking on switch. Add “/U” or “/CUL” before dash in part number to order UL recognized switch. Models rated 3A @ 125V AC & 2A @ 250V AC. Single pole: Momentary action circuit with solder lug terminations. File No. 023535_0_000 - Certified only when ordered with marking on switch. Add “/C” before dash in part number to order CSA certified switch. SB series rated 3A @ 125V AC & 2A @ 250V AC. Single pole: Momentary action circuit with solder lug terminations.

Series FB & SBMomentary Pushbuttons www.nkk.com C39 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries C PushbuttonsIlluminated PBSlides Programmable TogglesRockersTouch Tilt Distinctive Characteristics Optional caps in different colors to vary appearance as needed. Low operating force for ease of actuation. Rear panel bushing mount with compact behind panel dimension. Internal antijamming feature to protect the contacts from damage due to excessive force on the plunger. Self-cleaning contacts make FB models highly reliable. Low cost device of rugged one-piece bushing and housing construction. Reliability of construction with an internal guide to maintain contact alignment. Epoxy sealed terminals. Actual Size FB Actual Size SB FB Bushing Mount Page C40 SB Bushing Mount Page C42

Series FB .5 Amp Momentary Pushbuttons www.nkk.comC40 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries CPushbuttonsIlluminated PBSlides Programmable RockersTouch Tilt Toggles IMPORTANT: Switches are supplied without UL & cULus marking unless specified. UL & cULus recognized only when ordered with marking on the switch. Specific models, ratings, & ordering in- structions are noted on General Specifi- cations page. Cap Colors A Black B White C Red TYPICAL SWITCH ORDERING EXAMPLE AEP FFB SPST OFF-(ON) Circuit Silver Contacts & 500-Milliamp Rating Pole & Circuit 15AN SPST OFF (ON) ( ) = Momentary DESCRIPTION FOR TYPICAL ORDERING EXAMPLE FB15ANEP2-FA Caps F .201” (5.1mm) Dia. H .295” (7.5mm) Dia. Contact Materials & Ratings

2 Silver Contacts

500mA @ 125V AC

4 Gold Contacts

0.4V A max. @ 28V AC/DC max. .201” (5.1mm) Diameter Black Cap 15AN Terminals EP Epoxy Sealed PC/Turret P No Epoxy PC/Turret Epoxy Sealed PC/Turret Terminals Plunger Position ( ) = Momentary Connected Terminals Throw & Switch Schematics Pole Model Normal Down Normal Down Note: T erminal numbers are not actually on the switch. SP FB15AN OFF (ON) OPEN 1-2 SPST POLE & CIRCUIT

Series FB.5 Amp Momentary Pushbuttons www.nkk.com C41 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries C PushbuttonsIlluminated PBSlides Programmable TogglesRockersTouch Tilt CONTACT MATERIALS & RATINGS Silver Contacts Power Level 500mA @ 125V AC A T536 Hex Nut Material: Brass with nickel plating 4 Gold Contacts Logic Level 0.4V A maximum @ 28V AC/DC maximum No Epoxy PC/Turret Terminals Epoxy Sealed PC/Turret Terminals Material: Polyamide Finish: Glossy PEP TERMINALS TYPICAL SWITCH DIMENSIONS PC/Turret Plunger is white polyacetal. FB15ANEP2-FA SLIP-ON CAPS & COLORS AT496 .295” (7.5mm) Diameter AT475 .201” (5.1mm) Diameter H Panel Thickness: .110” (2.8mm) maximum Material: Polyamide Finish: Glossy F A B CBlack White RedColors Available: STANDARD HARDWARE & PANEL CUTOUT (5.1) Dia .201 (7.0) Dia .276 (4.0) .157 M5 P0.5 (1.2) .047 (5.0) Dia .197 (2.7) .106 (5.0) .197 (5.9) .232 (4.0) .157 (11.8) .465 (2.8) Dia .110 (2.54) .100 (0.15) Typ .006 (5.1) Dia .201 (4.0) .157(5.9) .232 (7.5) Dia .295 (4.0) .157(5.9) .232 (7.0) .276 M5 P0.5 (8.0) .315 (1.2) .047 (5.3) Dia .209 Complete explanation of operating range in Supplement section.

Series SB 3 Amp Momentary Pushbuttons www.nkk.comC42 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries CPushbuttonsIlluminated PBSlides Programmable RockersTouch Tilt Toggles IMPORTANT: Switches are supplied without UL, cULus & CSA marking unless specified. UL, cULus & CSA recognized only when ordered with marking on the switch. Specific models, ratings, & ordering in- structions are noted on General Specifi- cations page. TYPICAL SWITCH ORDERING EXAMPLE Plunger Colors No Code Black C Red MSB40 Metric Threaded Bushing SPST OFF-(ON) Normally Open Circuit Pole & Circuits Normally Open 11NO SPST OFF (ON) Normally Closed 11NC SPST ON (OFF) ( ) = Momentary DESCRIPTION FOR TYPICAL ORDERING EXAMPLE SB4011NOM Slip-On Cap & Colors No Code Without Cap 2A Black 2B White 2C Red 2E Yellow 2F Green 2G Blue Standard Black Plunger without Slip-on Cap 11NO Bushings M Metric Threaded M12 P1 H Inch Threaded 15/32-32 NS Silver Contacts with 3-Amp Rating Plunger Position ( ) = Momentary Connected Terminals Throw & Switch Schematics Pole Model Normal Down Normal Down Note: T erminal numbers are not actually on the switch. SP SB4011NO OFF (ON) OPEN 1-2 SPST SB4011NC ON (OFF) 1-2 OPEN POLE & CIRCUITS NO NC Contact Materials & Ratings No Code Silver Contacts 3A @ 125V AC or 2A @ 250V DC G Gold Contacts 0.4V A max. @ 28V AC/DC max.

Series SB3 Amp Momentary Pushbuttons www.nkk.com C43 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries C PushbuttonsIlluminated PBSlides Programmable TogglesRockersTouch Tilt SLIP-ON CAP & COLORS SB4011NOM SB4011NCM AT422 .394” (10.0mm) Diameter Cap SB4011NOM SB4011NCH Black White Red Yellow Green Blue TYPICAL SWITCH DIMENSIONS Panel Thickness: .157” (4.0mm) Hardware provided:

1 AT504 Knurled Face Nut

1 AT508 Lockwasher

1 AT527M Hex Mounting Nut

Details in Hardware & Accessories section. SB4011NOH SB4011NCH Hardware provided:

2 AT503H Hex Mounting Nuts

Details in Hardware & Accessories section. Panel Thickness: .157” (4.0mm) (12.0) Dia .472 (12.0) Dia .472 (12.0) Dia .472 (12.0) Dia .472 (10.0) Dia .394 15/32-32 NS (1.2) Dia .047 (4.0) .157 (10.4) .410 (22.0) .866 (6.3) .248 (8.4) Dia .331 (10.0) Dia .394 M12 P1 (1.2) Dia .047 (4.0) .157 (9.0) .354 (22.0) .866 (6.3) .248 (8.4) Dia .331 (10.0) Dia .394 15/32-32 NS (1.2) Dia .047 (5.0) .197 (23.0) .906 (6.3) .248 (8.4) Dia .331 (10.4) .410 (10.0) Dia .394 M12 P1 (1.2) Dia .047 (5.0) .197 (9.0) .354 (23.0) .906 (6.3) .248 (8.4) Dia .331 (7.3) .287 (2.2) Typ .086 (0.6) Typ .024 (7.3) .287 (2.2) Typ .086 (0.6) Typ .024 (12.5) Dia .492 (12.5) Dia .492 Inch Bushing Metric Bushing (8.8) .346 (10.0) Dia .394 (6.0) .236 SLIP-ON CAP & COLORS SB4011NOM SB4011NCM Material: Polyethylene Finish: Matte AT422 .394” (10.0mm) Diameter Cap SB4011NCH Black White Red Yellow Green Blue TYPICAL SWITCH DIMENSIONS Panel Thickness: .157” (4.0mm) Hardware provided: Details in Hardware & Accessories section. SB4011NOH SB4011NCH Hardware provided: Details in Hardware & Accessories section. Panel Thickness: .157” (4.0mm) (12.0) Dia .472 (12.0) Dia .472 (12.0) Dia .472 (12.0) Dia .472 (10.0) Dia .394 15/32-32 NS (1.2) Dia .047 (4.0) .157 (10.4) .410 (22.0) .866 (6.3) .248 (8.4) Dia .331 (10.0) Dia .394 M12 P1 (1.2) Dia .047 (4.0) .157 (9.0) .354 (22.0) .866 (6.3) .248 (8.4) Dia .331 (10.0) Dia .394 15/32-32 NS (1.2) Dia .047 (5.0) .197 (23.0) .906 (6.3) .248 (8.4) Dia .331 (10.4) .410 (10.0) Dia .394 M12 P1 (1.2) Dia .047 (5.0) .197 (9.0) .354 (23.0) .906 (6.3) .248 (8.4) Dia .331 (7.3) .287 (2.2) Typ .086 (0.6) Typ .024 (7.3) .287 (2.2) Typ .086 (0.6) Typ .024 (12.5) Dia .492 (12.5) Dia .492 Inch Bushing Metric Bushing