F6584 HAMAMATSU

Document overview

  • PDF pages: 2

Technical content

Page 1

WIDE DYNAMIC RANGE

MICROCHANNEL PLATES

F6584 SERIES

20 µA Output Current is Available \*

The F6584 series is a wide dynamic range MCP that offers more than ten - fold increase in maximum output current

compared to conventional MCPs. This increased current capability is due to low plate resistance. When operated in pulse

counting mode, the F6584 series MCPs also provide maximum counting capability that is more than ten - fold higher than

conventional MCPs. The design is optimized to prevent resistance reduction resulting from high power consumption or

high temperature operation.

The F6584 series MCPs therefore offer excellent stability and reliability even during high current or high temperature

operations. This results in a very wide dynamic range, making these MCPs ideal for various applications such as mass

spectrometers and usage for high counting PMTs.

FEATURES

G Wide Dynamic Range Typ. 20 µA Maximum Output Current \*

G Operable in high temperature condition (+350°C Max. c)

G High Gain and Low Noise

APPLICATIONS

G MS Detector

G ICP-MS

G GC-MS

G LC-MS

G ESCA

G Mössbauer Detector

SPECIFICATIONS

GENERAL

Parameter F6584-01 F6584-09 Unit
Outer Diameter 24.9 mm
Effective Diameter 20 mm
Plate Thickness 0.48 0.43 mm
Channel Diameter 12 10 µm
Channel Pitch 15 12 µm
Bias Angle 5,15 degree
Open Area Ratio 60 %
Electrode Material Inconel –

CHARACTERISTICS (at 1000V, 1.3×10 -4 Pa(1×10 -6 Torr), +25°C)

Gain More than 10 4 –
Plate Resistance 2 to 30 MΩ
Maximum Dark Current 5 × 10 -13 A/cm2
Maximum Linear Output Signal 10 to 20% of the strip current a –

MAXIMUM RATINGS (Absolute Values)

Supply Voltage b 1000 V
Ambient Temperature C -50 to +350 °C

NOTE: a: The strip current is the current flowing through the channel walls, which supplies the current released from the channel walls. It is given by : Supply voltage / Plate resistance. b: At a vacuum of 1.3 × 10 -4 Pa(1 × 10 -6 Torr) or less. C: Single plate operation

\* When the MCP resistance is less than 10 MΩ.

Figure 1: Typical Current Gain vs. Supply Voltage

TMCPB0043EA

104

103

102 500 600 700 800 900 1000 1100

SUPPLY VOLTAGE (V)

Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. © 1998 Hamamatsu Photonics K. K.

Page 2

WIDE DYNAMIC RANGE MICROCHANNEL PLATES F6584 SERIES

Figure 3: MCP Saturation Characteristics

Figure 2: MCP Saturation Characteristics (D.C. MODE)

TMCPB0041EB

PDF page 2 diagram

OUTPUT CURRENT [A]

Figure 4: MCP Dimensional Outline (Unit : mm)

INDICATOR\*

T

PDF page 2 diagram

θ : Bias Angle \*This indicator shows the MCP input side and the direction of channel bias.

TMCPA0030EB

HAMAMATSU PHOTONICS K.K., Electron Tube Center

(COUNTING MODE)

TMCPB0042EC

PDF page 2 diagram

OUTPUT CHARGE (C/s)

PRECAUTIONS FOR USE

G Avoid touching the MCP or MCP assembly with bare hands. G Handle the MCP only in a clean room since dust and humidity may adversely affect MCP characteristics. G The MCP should be operated in vacuum below 1.33 x 10 -4 Pa(1 × 10 -6 torr). G The MCP should be kept in vacuum or dry nitrogen gas atmosphere during long periods of storage. G When outgassing from the MCP occurs, baking the MCP at 400°C maximum in a vacuum system is recommended. In ad- dition electron bombarding may be effective.

314-5, Shimokanzo, Toyooka-village, Iwata-gun, Shizuoka-ken, 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: Lough Point, 2 Gladbeck Way, Windmill Hill, Enfield, Middlesex EN2 7JA, United Kingdom, Telephone: (44)181-367-3560, Fax: (44)181-367-6384

North Europe: Hamamatsu Photonics Norden AB: Färögatan 7, S-164-40 Kista, Sweden, Telephone: (46)8-703-29-50, Fax: (46)8-750-58-95 Italy: Hamamatsu Photonics Italia S.R.L.: Via Della Moia, 1/E 20020 Arese, (Milano), Italy, Telephone: (39)2-935 81 733, Fax: (39)2-935 81 741

TMCP1012E04 MAR. 1998. SI (9603) Printed in Japan (500)