F6492 HAMAMATSU

Document overview

  • PDF pages: 2

Technical content

Page 1

LONG SCALE

MICROCHANNEL PLATE

F6492

Very Long (Effective Area: 127 4mm)

This new long-scale MCP allows for continuous detection of wide range position information without dead space correction. This new configuration promises reliable measurement, and is well suited for double-focusing mass spectrometers. Assembled configurations are also available upon request.

FEATURES

Long Scale (Effective Area: 127mm 4mm) Simultaneous Multielement Measurement Possible Sensitive to Ions, Electrons, UV Radiation, Soft X-rays, -rays and High Energy Particles High Gain (1 104)

APPLICATIONS

SIMS (Secondary Ions Mass Spectrometers) UV Spectrometers X-ray Spectrometers Electron Spectrometers

GENERAL

Parameter Description/Value Unit
Outer Dimension 140 9 mm
Electrode Dimension 138 8 mm
Effective Area Dimension 127 4 mm
Thickness 0.48 mm
Channel Diameter 12 m
Channel Pitch 15 m
Bias Angle 8
Open Area Ratio 60 %
Electrode Material Inconel –

CHARACTERISTICS (at 1000V, 1.3 10-4 Pa (1 10-6 Torr), 25 )

Parameter Discription/Value Unit
Current Gain Min. 1 104 –
Plate Resistance 10 to 100 M
Maximum Dark Current 5 10-13 A/cm2
Maximum Linear Output Current up to 7% of the strip current –

MAXIMUM RATINGS (Absolute Values)

Parameter Discription/Value Unit
Supply Voltage 1000 V
Ambient Temperature -50 to +50

NOTE:

: Strip current is current flowing through the channel walls, which supplies the current released from the channel walls. It is given by: Supply voltage / Plate resistance. : At a vacuum of 1.3 10-4 Pa (1 10-6 Torr) or better.

PDF page 1 diagram

Figure 1: Typical Current Gain

TMCPB0036EA

PDF page 1 diagram

SUPPLY VOLTAGE (V)

Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. lnformation furnished by HAMAMATSU is believed to be reliabIe. However, no responsibility is assumed for possibIe inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. © 1996 Hamamatsu Photonics K.K.

Page 2

LONG SCALE MICROCHANNEL PLATE F6492

Figure 2: Dimensional Outline (Unit: mm)

EFFECTIVE AREA

ELECTRODE

INDICATOR

PDF page 2 diagram

Figure 3: Application Example to SIMS1)

SECONDARY ION

PRIMARY ION SIGNAL

MASS ANALYZER

IRRADIATION DISPLAY

SYSTEM

SYSTEM SYSTEM

SECTOR ELECTRIC FIELD

PDF page 2 diagram

+ LINEAR IMAGE SENSOR

TMCPC0038EA

REFERENCE

1) Japan Academic Promotion Society, 141th Committee on Micro Beam Analysis: “Micro beam analysis” Asakura Shoten, 293 (1985)

HAMAMATSU PHOTONICS K.K., Electoron Tube Center

PRECAUTIONS FOR USE

Avoid touching the MCP or MCP assembly with bare hands.

Handle the MCP only in a clean room since dust and humidity may adversely affect MCP characteristics.

The MCP should be operated in vacuum below 1.33 10-4 Pa (1 10-6 torr).

The MCP should be kept in vacuum or dry nitrogen gas atmosphere during long periods of storage.

When outgassing from the MCP occurs, baking the MCP at 350 C maximum in a vacuum system is recommended. In addition electron bombarding may be effective.

314-5, Shimokanzo, Toyooka-village, Iwata-gun, Shizuoka-ken, 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limted: Lough Point, 2 Gladbeck Way, Windmill Hill, Enfield, Middlesex EN2 7JA, United Kingdom, Telephone: (44)181-367-3560, Fax: (44)181-367-6384

North Europe: Hamamatsu Photonics Norden AB: Färögatan 7, S-164-40 Kista Sweden, Telephone: (46)8-703-29-50, Fax: (46)8-750-58-95

TMCP1009E05

Italy: Hamamatsu Photonics Italia: S.R.L.: Via Della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)2-935 81 733, Fax: (39)2-935 81 741

JAN. 1997 SI (9609) Printed in Japan