ETN1-1-13 MACOM
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
- Surface Mount
- 1:1 Impedance Ratio
- Available on Tape & Reel
Description
M/A-COM’s ETN1-1-13 is a 1:1 RF transformer in a low cost, surface mount package. Ideally suited for high volume applica- tions. Electrical Specifications @25°C Parameter Units Nominal Maximum Mean (x) Sigma (σ) Frequency Range 4.5 - 2000 MHz — — — — Insertion Loss (fL - fU ) 4.5 - 1000 MHz 1000 - 2000 MHz dB dB 1.0 2.0 0.32 0.036 Amplitude Unbalance 4.5 - 1000 MHz 80 - 870 MHz dB dB 1.0 0.7 Phase Unbalance 4.5 - 1000 MHz 80 - 870 MHz De grees Degrees E-Series RF 1:1 Transformer 4.5 - 2000 MHz ETN1-1-13 Schematic Note: Mean and Sigma calculated from average loss at @ (fU-fL)/2+ fL Please Note that the photograph above indicates typical package only, not actual unit.
M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087 ■ Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice. V1.00 S 1455 Absolute Maximum Ratings Parameter Absolute Maximum RF Power 250 mW DC Current 30 mA Operating/Storage Temperature -40°C to +85°C Functional Configuration Function Pin No. Secondary Dot 1 Center Tap - Secondary 3 Primary 4 Not Connected 2,5 Primary Dot 6 Insertion Loss Typical Performance @ +25°C Amplitude Unbalance Phase Unbalance