ETC1-1-13_1 MACOM
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
- 1:1 Impedance Ratio
- Surface Mount
- Tape and reel packaging available
Description
M/A-COM’s ETC1-1-13 is a 1:1 RF transmission line transformer in a low cost, surface mount package. Ideally suited for high volume cellular and wireless applications. Parts are packaged in tape & reel.
Ordering Information
ETC1-1-13TR Tape and Reel (2000 piece Reel) Electrical Specifications: TA = 25°C, Z0 = 50Ω 1 Parameter Test Conditions Frequency Units Min Typ Max RF Frequency — 4.5 - 3000 MHz — — — Insertion Loss FL—f U 4.5 - 1000 1000 - 2000 2000 - 3000 dB dB dB 0.32 1.0 2.0 3.5 Amplitude Unbalance — 4.5 - 1000 dB — — 1.0 Phase Unbalance — 4.5 - 1000 Degrees — — 20 Absolute Maximum Ratings 1 1. Operation of this device abov e any one of these parameters may cause permanent damage. Parameter Absolute Maximum DC Power 250 mW DC Current 30 mA Operating Temperature -40°C to +85°C Storage Temperature -55°C to +125°C
E-Series RF 1:1 Transmission Line Transformer 4.5 – 3000 MHz ETC1-1-13 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information.
- North America Tel: 800.366.2266 / Fax: 978.366.2266 Visit www.macom.com for additional data sheets and product information. Schematic Input Impedance Phase Unbalance Typical Performance Curves Insertion Loss Amplitude Unbalance Primary Dot 5 (Input) Primary 4 (Ground)
1 Secondary Dot
(Output Thru)
3 Secondary
(Output Coupled) Pin Configuration Pin No. Function