ETC1-1-10_1 MACOM
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
- 1:1 Impedance Ratio
- Surface Mount
- Tape and reel packaging available
Description
M/A-COM’s ETC1-1-10 is a 1:1 RF transmission line transformer in a low cost, surface mount package. Ideally suited for high volume cellular and wireless applications. Parts are packaged in tape & reel.
Ordering Information
ETC1-1-10TR Tape and Reel (2000 piece Reel) Electrical Specifications: TA = 25°C, Z0 = 50Ω 1 Parameter Test Conditions Frequency Units Min Typ Max RF Frequency — 1710 - 1910 MHz — — — Insertion Loss FL—f U 1710 - 1910 dB — — 2.0 Amplitude Unbalance — 1710 - 1910 dB — — 2.0 Phase Unbalance — 1710 - 1910 Degrees — — 10° Absolute Maximum Ratings 1 1. Operation of this device above any one of these parameters may cause permanent damage. Parameter Absolute Maximum DC Power 250 mW DC Current 30 mA Operating Temperature -40°C to +85°C Storage Temperature -55°C to +125°C
E-Series RF 1:1 Transformer 1710 – 1910 MHz ETC1-1-10 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information.
- North America Tel: 800.366.2266 / Fax: 978.366.2266 Visit www.macom.com for additional data sheets and product information. Pin Configuration Pin No. Function
1 Secondary Dot
2 Not Connected
3 Secondary
4 Primary
5 Primary Dot
Typical Performance Curves Insertion Loss Amplitude Unbalance