ESRD101M0EXR

ESRDEL ETC2

Document overview

• Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

1605 East Rodney French Blvd. New Bedford, MA 02744 (508) 996-8564, Fax (508) 996-3830 http://www.cornell-dubilier.com E-mail: cdenb@cornell-dubilier.com 1.035 Chip and SMT Capacitors CORNELL DUBILIER Y our Source For Capacitor Solutions SPA Capacitors Solid Polymer Aluminum Surface Mount Capacitors Solid polymer aluminum capacitors combine the high capacitance capability of an electrolytic component with the high frequency performance of film capacitors. When the need for low impedance at high frequency is critical for your design, one SPA chip is capable of replacing several liquid electrolyte aluminum or tantalum capacitors connected in parallel. This is due to the ultra-low e.s.r. which results in significantly lower impedance than either aluminum or tantalum capacitors at frequencies of 100 kHz and above. There is no longer a need to stack capacitors to lower the impedance at high frequency. The low e.s.r. and high capacitance make them ideal for bypassing high frequency noise, and for switching frequency filtering in DC/ DC conversion. SPA capacitors are packaged in a molded resin case with the same footprint (7.3x4.3 mm) as the industry standard tantalum “D” and “E” case sizes. The solid electrolyte results in a capacitor with stable impedance and equivalent series resistance over the entire operating temperature range and they have more than twice the ripple current handling capability of tantalum capacitors. In addition, the solid electrolyte delivers a typical expected operating life of more than 50 years, and it is ignition free. Highlights

• Capacitance Range: 2.2 µF to 390 µF
• Ripple current ratings up to 3.5Arms at 100 kHz and 105°C
• Low Impedance
• Ultra-Low E.S.R.; 10 mΩ @ 100 kHz
• -55° to 105°C operating temperatur e Voltage Range: 2.0 Vdc to 16 Vdc
• Solid electrolyte for extended life
• Footprint Compatible with “D” and “E” Case Tantalum
• Flat Z and E.S.R. vs. temperature
• Ignition free Filtering power of 3 or more tantalum chips and 50 year life CDE SPA Type ESRE ESRD ESRD ESRL Capacitance Range (µF) 100 - 390 68 - 270 2.2 -120 15 - 68 New! Extended Range Ratings, 20% More Capacitance CDE SPA Type ESRE ESRD ESRD ESRL ESRH* Capacitance Range (µF) 100-390 68-270 2.2-120 15-68 68-270 *Operates to 125˚C

1605 East Rodney French Blvd. New Bedford, MA 02744 (508) 996-8564, Fax (508) 996-3830 http://www.cornell-dubilier.com E-mail: cdenb@cornell-dubilier.com1.036 CORNELL DUBILIER Y our Source For Capacitor Solutions Chip and SMT Capacitors SPA Capacitors Solid Polymer Aluminum Capacitors Markings

Ordering Information

Polarity Stripe (Anode) +Capacitance ("R" = Decimal Point) W.V. Code D = 2.0 V E = 2.5 V G = 4.0 V J = 6.3 V CDE Type CAPACITANCE CODE 4R7 = 4.7 µF 220 = 22 µF 101 = 100 µF CAPACITANCE TOLERANCE M = ± 20% WVDC CODE 02 = 2.0 Vdc 0E = 2.5 Vdc 04 = 4.0 Vdc 06 = 6.3 Vdc PACKAGING CODE R = Tape & Reel ESRD (1.8mm Ht.): 3500 pcs/ reel ESRD (2.8mm Ht.): 2000 pcs/ reel ESRE: 2000 pcs/reel ESRL: 3500 pcs/reel B = Bulk Quantity (100 pc multiples) ESRD 4R7 M 16 R K = 8.0 V B = 12.5 V C = 16.0 V 08 = 8.0 Vdc 12 = 12.5 Vdc 16 = 16.0 Vdc

Applications

Switching Supply Input/Output Filters Power Supply Decoupling High Frequency Noise Reduction Laptop LCD Displays Automotive Digital Equipment Portable Electronic Equipment Lot Code

1605 East Rodney French Blvd. New Bedford, MA 02744 (508) 996-8564, Fax (508) 996-3830 http://www.cornell-dubilier.com E-mail: cdenb@cornell-dubilier.com 1.037 Chip and SMT Capacitors CORNELL DUBILIER Y our Source For Capacitor Solutions SPA Capacitors Solid Polymer Aluminum Capacitors Ratings 1 For other frequencies use the ripple current frequency multipliers. Outline Drawing Dimensions in mm Part Maximum Maximum Capacitance Number E.S.R Ripple Current (Tape & Reel) 100kHz/20 °C 100kHz/105 °C (µF) (Ω ) (Amps)

2.0 Vdc

100 ESRD101M02R 0.025 1.8 1.8 180 ESRD181M02R 0.018 2.2 3.1 220 ESRD221M02R 0.018 2.2 3.1 82 ESRD820M0ER 0.025 1.8 1.8 150 ESRD151M0ER 0.018 2.2 3.1 180 ESRD181M0ER 0.018 2.2 3.1 56 ESRD560M04R 0.025 1.8 1.8 120 ESRD121M04R 0.018 2.2 3.1

6.3 Vdc

10 ESRD100M06R 0.060 1.0 1.8 22 ESRD220M06R 0.045 1.3 1.8 33 ESRD330M06R 0.035 1.6 1.8 47 ESRD470M06R 0.025 1.8 1.8 100 ESRD101M06R 0.018 2.2 3.1

8.0 Vdc

8.2 ESRD8R2M08R 0.060 1.0 1.8 15 ESRD150M08R 0.045 1.3 1.8 22 ESRD220M08R 0.035 1.6 1.8 33 ESRD330M08R 0.025 1.8 1.8 68 ESRD680M08R 0.018 2.2 3.1

12.5 Vdc

4.7 ESRD4R7M12R 0.080 1.0 1.8 10 ESRD100M12R 0.060 1.0 1.8 15 ESRD150M12R 0.050 1.3 1.8 22 ESRD220M12R 0.040 1.3 1.8

16.0 Vdc

2.2 ESRD2R2M16R 0.110 1.0 1.8 4.7 ESRD4R7M16R 0.080 1.0 1.8 6.8 ESRD6R8M16R 0.070 1.0 1.8 8.2 ESRD8R2M16R 0.060 1.0 1.8 Case Height H ( ±0.1 mm )

2.5 Vdc

4.0 Vdc

Part Maximum Maximum 1 Case Capacitance Number E.S.R Ripple Current Height (Tape & Reel) 100kHz/20°C 100kHz/105°C H (µF) ( Ω ) (Amps) (mm) 100 ESRD101M02R 0.025 1.8 1.8 ± .1 120 ESRD121M02XR 0.015 2.7 1.8 ± .1 180 ESRD181M02R 0.018 2.2 2.8 ± .2 220 ESRD221M02R 0.018 2.2 2.8 ± .2 270 ESRD271M02XR 0.012 3.3 2.8 ± .2 82 ESRD820M0ER 0.025 1.8 1.8 ± .1 100 ESRD101M0EXR 0.015 2.7 1.8 ± .1 150 ESRD151M0ER 0.018 2.2 2.8 ± .2 180 ESRD181M0ER 0.018 2.2 2.8 ± .2 220 ESRD221M0EXR 0.012 3.3 2.8 ± .2 56 ESRD560M04R 0.025 1.8 1.8 ± .1 82 ESRD820M04XR 0.015 2.7 1.8 ± .1 120 ESRD121M04R 0.018 2.2 2.8 ± .2 150 ESRD151M04XR 0.012 3.3 2.8 ± .2 10 ESRD100M06R 0.060 1.0 1.8 ± .1 22 ESRD220M06R 0.045 1.3 1.8 ± .1 33 ESRD330M06R 0.035 1.6 1.8 ± .1 47 ESRD470M06R 0.025 1.8 1.8 ± .1 68 ESRD680M06XR 0.015 2.7 1.8 ± .1 100 ESRD101M06R 0.018 2.2 2.8 ± .2 120 ESRD121M06XR 0.012 3.3 2.8 ± .2 15 ESRD150M08R 0.045 1.3 1.8 ± .1 22 ESRD220M08R 0.035 1.6 1.8 ± .1 33 ESRD330M08R 0.025 1.8 1.8 ± .1 68 ESRD680M08R 0.018 2.2 2.8 ± .2 10 ESRD100M12R 0.060 1.0 1.8 ± .1 15 ESRD150M12R 0.050 1.3 1.8 ± .1 22 ESRD220M12R 0.040 1.3 1.8 ± .1 1 For other frequencies use the ripple current frequency multipliers.

1605 East Rodney French Blvd. New Bedford, MA 02744 (508) 996-8564, Fax (508) 996-3830 http://www.cornell-dubilier.com E-mail: cdenb@cornell-dubilier.com1.038 CORNELL DUBILIER Y our Source For Capacitor Solutions Chip and SMT Capacitors SPA Capacitors Solid Polymer Aluminum Capacitors Ratings Outline Drawing Dimensions in mm ESRE Surface Mount, High Capacitance Part Maximum Maximum Capacitance Number E.S.R. Ripple Current (Tape & Reel) 100kHz/20 °C 100kHz/105 °C (µF) (Amps) 270 ESRE271M02R 0.015 3.0 330 ESRE331M02R 0.015 3.0 220 ESRE221M0ER 0.015 3.0 270 ESRE271M0ER 0.015 3.0 180 ESRE181M04R 0.015 3.0 150 ESRE151M06R 0.015 3.0 100 ESRE101M08R 0.015 3.0 1 For other frequencies use the ripple current frequency multipliers. (Ω ) Part Maximum Maximum 1 Capacitance Number E.S.R Ripple Current (Tape & Reel) 100kHz/20°C 100kHz/105°C (µF) ( Ω ) (Amps) 270 ESRE271M02R 0.015 3.0 330 ESRE331M02R 0.015 3.0 390 ESRE391M02XR 0.010 3.5 220 ESRE221M0ER 0.015 3.0 270 ESRE271M0ER 0.015 3.0 330 ESRE331M0EXR 0.010 3.5 180 ESRE181M04R 0.015 3.0 220 ESRE221M04XR 0.010 3.5 150 ESRE151M06R 0.015 3.0 180 ESRE181M06XR 0.010 3.5 100 ESRE101M08R 0.015 3.0 1 For other frequencies use the ripple current frequency multipliers. H = 4.1 ± .2

1605 East Rodney French Blvd. New Bedford, MA 02744 (508) 996-8564, Fax (508) 996-3830 http://www.cornell-dubilier.com E-mail: cdenb@cornell-dubilier.com 1.039 Chip and SMT Capacitors CORNELL DUBILIER Y our Source For Capacitor Solutions SPA Capacitors Solid Polymer Aluminum Capacitors Ratings Outline Drawing Dimensions in mm ESRL Surface Mount, Very Low Profile (1.1mm High) 1 For other frequencies use the ripple current frequency multipliers. Part Maximum Maximum Capacitance Number E.S.R. Ripple Current (Tape & Reel) 100kHz/20 °C 100kHz/105 °C (µF) (Amps) 68 ESRL680M02R 0.035 1.6 56 ESRL560M0ER 0.035 1.6 39 ESRL390M04R 0.035 1.6 33 ESRL330M06R 0.035 1.6 22 ESRL220M08R 0.035 1.6 Part Maximum Maximum 1 Capacitance Number E.S.R Ripple Current (Tape & Reel) 100kHz/20°C 100kHz/105°C (µF) ( Ω ) (Amps) 68 ESRL680M02R 0.035 1.6 56 ESRL560M0ER 0.035 1.6 39 ESRL390M04R 0.035 1.6 47 ESRL470M04R 0.035 1.6 33 ESRL330M06R 0.035 1.6 22 ESRL220M08R 0.035 1.6 15 ESRL150M12R 0.040 1.4 1 For other frequencies use the ripple current frequency multipliers.

1605 East Rodney French Blvd. New Bedford, MA 02744 (508) 996-8564, Fax (508) 996-3830 http://www.cornell-dubilier.com E-mail: cdenb@cornell-dubilier.com1.040 CORNELL DUBILIER Y our Source For Capacitor Solutions Chip and SMT Capacitors SPA Capacitors Solid Polymer Aluminum Capacitors Specifications Operating Temperature Range; -55°C to +105°C, at 100% rated voltage Surge Voltage; 125% of the rated working Vdc Capacitance Range; 2.2 µF to 390 µF Capacitance Tolerance; ±20% at 120 Hz and +20°C DC Leakage Current (DCL); After a two minute application of the rated working voltage at +20°C: 2V - 4V: I ≤ 0.06CV 6.3V - 16V: I ≤ 0.04CV or 3µA (whichever greater) Dissipation Factor (DF); The ratio of the capacitorís equivalent series resistance to its reactance at 120Hz and +20°C. Resistance to Soldering Heat; Heat the capacitors at 235°C in an oven for 200 seconds. The capacitors will meet the following limits after stabilizing at 20°C: ∆ C = ±10% of the initial measured value DF ≤ the initial specified value DCL ≤ the initial specified value Moisture Resistance; After 500 hours storage at +60°C and 90 to 95% R.H. without load, the capacitor will meet the following limits: ∆C = +70%/-20% of the initial measured value (2.0 Vdc, 2.5 Vdc), +60%/-20% of the initial measured value (4.0 Vdc), +50%/-20% of the initial measured value (6.3 Vdc), +40%/-20% of the initial measured value (all other voltages) DF ≤ two times the initial specified value DCL ≤ the initial specified value Life Test; Apply rated DC working voltage at 105°C for 1000 hours, and then stabilize them to +20°C. Capacitors will meet the following limits: ∆C = ±10% of the initial measured value DF ≤ the initial specified value DCL ≤ the initial specified value Shelf Life Test; Shelf life is typically 5 to 10 years. Accelerated test: after 500 hours at 105°C, capacitors will meet the following limits after stabilization at 20°C: ∆C = ±10% of the initial measured value DF ≤ the initial specified value DCL ≤ the initial specified value Shear Test; No damage shall be visible after subjecting a mounted capacitor to a side force of 5 N for 10 seconds Vibration; No abnormal change shall occur to capacitors that have been soldered (and attached) to a board when subjected to a vibration of 1.5 mm amplitude that is varied from 10 Hz to 2000 Hz in 20 min. cycles. The test duration is 2 hours for each right angle direction (total 6 hours). Capacitance is monitored during the last cycle of the test for stablilty.