8022591 FESTO

Document overview

  • PDF pages: 2

Technical content

Page 1

Electric actuator ESBF-BS-50-300-5P

Part number: 8022591

PDF page 1 diagram

Data sheet

Feature Value
Size 50
Stroke 300 mm
Piston rod thread M16x1.5
Reversing backlash 30 µm
Screw diameter 20 mm
Spindle pitch 5 mm/U
Max. angle of rotation of the piston rod +/- 0.15 deg
Based on norm ISO 15552
Mounting position Any
Piston rod end External thread
Motor type Stepper motor Servo motor
Position sensing For proximity sensor
Structural design Electric actuator with ball screw
Spindle type Ball screw
Symbol 00991941
Protection against torsion/guide With plain-bearing guide
Max. acceleration 5 m/s²
Max. speed 0.33 m/s
Repetition accuracy ±0.01 mm
Duty cycle 100%
Corrosion resistance class (CRC) 2 - Moderate corrosion stress
LABS conformity VDMA24364 zone III
Storage temperature -20 °C ... 60 °C
For use in the food industry See supplementary material information
Relative air humidity 0 - 95 %
Degree of protection IP40
Ambient temperature 0 °C ... 60 °C
Max. driving torque 4.8 Nm
Max. radial force on actuator shaft 300 N
Max. feed force Fx 5000 N
No-load driving torque 0.3 Nm
Guide value for payload, horizontal 500 kg
Guide value for payload, vertical 500 kg
Mass moment of inertia JH per meter of stroke 1.0187 kgcm²
Mass moment of inertia JL per kg of payload 0.0063 kgcm²

5/8/22 - Subject to change - Festo SE & Co. KG

1/2

Page 2

Feature Value
Mass moment of inertia JO 0.1453 kgcm²
Moving mass at 0 mm stroke 793 g
Additional weight per 10 mm stroke 65 g
Basic weight with 0 mm stroke 1982 g
Additional moving mass per 10 mm stroke 35 g
Type of mounting With internal thread or accessory
Interface code, actuator D50
Note on materials RoHS-compliant
Cover material Wrought aluminium alloy, smooth anodised
Piston rod material High-alloy stainless steel
Material of screws Steel, galvanized
Spindle nut material Roller bearing steel
Spindle material Roller bearing steel
Material of cylinder barrel Wrought aluminum alloy, smooth-anodized

5/8/22 - Subject to change - Festo SE & Co. KG

2/2