ES1GL MULTICOMP
Document overview
- Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
- PDF pages: 3
Technical content
Features
- Ideal for Automated Placement
- Low profile space
- Glass Passivated Chip Junctions
- Low reverse leakage current
- High current capability
- Low forward voltage drop Mechanical Data
- Case: JEDEC SOD-123FL Molded plastic
- Polarity: Colour band denotes cathode
- Mounting position: Any
Applications
- For use in SMPS, high frequency inverters, PWM and polarity protection applications Maximum Ratings and Electrical Characteristics Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristics Symbol ES1DL ES1GL Unit Marking E1DL E1GL Maximum Repetitive Peak Reverse Voltage VRRM 200 400 VMaximum RMS Voltage VRMS 140 280 Maximum DC Blocking voltage VDC 200 400 Maximum Average Forward Rectified Current @TA=55°C I(AV) 1 APeak Forward Surge Current, 8.3mS Single Half Sine-Wave, Superimposed on Rated Load (JEDEC Method) IFSM 25 Peak Forward Voltage at 1.0A DC (Note1) VF 0.95 1.25 V Maximum DC Reverse Current @TJ=25°C at Rated DC Blocking Voltage @TJ=100°C IR μA 150 Maximum Reverse recovery time @IF=0.5A,IR=1.0A,Irr=0.25A trr 35 nS Typical Thermal Resistance Junction to Ambient RθJA 150 °C/W Operating Junction Temperature Range TJ -55 to +150 Storage Temperature Range TSTG -55 to +150 2. The typical data above is for reference only.
Page <2> V1.007/09/22 Rectifier Diodes Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Rating and Characteristic Curves
Page <3> V1.007/09/22 Rectifier Diodes Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019. Packaging Dimensions Part Number Table Description Part Number Rectifier Diode, Super Fast, 1A, 200V, 35ns, SOD-123FL ES1DL Rectifier Diode, Super Fast, 1A, 400V, 35ns, SOD-123FL ES1GL Dimensions : Inches (Millimetres) Cathode Anode SOD-123FL