ES1AW

ES1AW_V01 YFWDIODE

Document overview

• Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

1 / 3 www.yfwdiode.com Dongguan YFW Electronics Co, Ltd. Surface Mount Superfast Recovery Rectifier Reverse Voltage - 50 to 600 V Forward Current - 1 A

FEATURES

For surface mounted applications Low profile package Built-in strain relief Lead free in comply with EU RoHS 2011/65/EU directives MECHANICAL DATA Case: SOD-123FL Terminals: Solderable per MIL-STD-750, Method 2026 Approx. Weight: 15mg / 0.00053oz Pinning 1.Cathode 2.Anode 1 2 SOD123FL Absolute Maximum Ratings and characteristics Ratings at 25 °C ambient temperature unless otherwise specified. Single phase half-wave 60 Hz, resistive or inductive load, for capacitive load current derate by 20 %. Parameter Symbols ES1AW ES1BW ES1DW ES1GW ES1JW Units Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 V Maximum RMS voltage VRMS 35 70 140 280 420 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 V Maximum Average Forward Rectified Current at Tc = 125 °C IF(AV) A Peak Forward Surge Current 8.3 ms Single Half Sine Wave Superimposed on Rated Load IFSM 30 A Maximum Instantaneous Forward Voltage at 1 A VF 0.95 1.25 1.65 V Maximum DC Reverse Current Ta = 25 °C at Rated DC Blocking Voltage Ta=125 °C IR 100 μA Typical Junction Capacitance at VR=4V,f=1MHZ Cj 15 pF Maximum Reverse Recovery Time（1） Trr 35 nS Typical Thermal Resistance （2） RθJA 85 °C/W Operating and Storage Temperature Range Tj, Tstg -55 ~ +150 （1）Measured with IF=0.5A,IR=1A,In=0.25A Marking Code ES1AW E1A ES1BW E1B ES1DW E1D ES1GW E1G ES1JW E1J

2 / 3 www.yfwdiode.com Dongguan YFW Electronics Co, Ltd. Fig.3 Typical Reverse Characteristics I - Current ( A)R Reverse μ 20 100600 0.1 1.0 % of PIV.VOLTS 100 40 80 300 T =25J °C T =75J °C T =125J °C 50 ohm Noninductive 25Vdc approx D.U.T 10 ohm Noninductive NonInductive 1 ohm OSCILLOSCOPE Note 1 PULSE GENERATOR Note 2 Note：1.Rise Time = 7ns, max. Input Impedance = 1megohm,22pF. 2. Ries Time =10ns, max. Source Impedance = 50 ohms. Fig.1 Reverse Recovery Time Characteristic And Test Circuit Diagram -0.25 -1.0 +0.5 trr 10ns/div Set time Base for 10ns/div 0.2 0.4 0.6 0.8 1.0 1.2 0.0 25 50 75 100 125 150 175 Average Forward Current (A) Case Temperature (°C) Fig.2 Maximum Average Forward Current Rating 10 100 Fig.6 Maximum Non-Repetitive Peak Forward Surage Current Peak A)Forward Surage Current ( Number of Cycles 8.3 ms Single Half Sine Wave (JEDEC Method) Fig.4 Typical CharacteristicsForward 2.0 2.51.50 0.01 0.1 1.0 0.5 1.0 0.001 Instaneous Forward Current (A) Instaneous Forward Voltage (V) T =25J °C ES1JW ES1EW/ES1GW ES1AW~ES1DW Single phase half-wave 60 Hz resistive or inductive load Fig.5 Typical Junction Capacitance Junction Capacitance ( pF) 1.0 10 1000.1 100 Reverse Voltage (V) T =25J °C f = 1.0MHz Vsig = 50mVp-p 8.3 ms Single Half Sine Wave (JEDEC Method)

3 / 3 www.yfwdiode.com Dongguan YFW Electronics Co, Ltd. Package Outline Plastic surface mounted package; 2leads SOD-123FL The recommended mounting pad size Summary of Packing Options Package Packing Description Packing Quantity Industry Standard Tape/Reel,13”reel 10000 EIA-481-1 SOD-123FL Tape/Reel,7”reel 3000 EIA-481-1 A A C ∠ALL ROUND V AM e UNIT mm max min mil max min 7.9 4.7 114 102 150 138 A C D E HE ∠ 1.1 0.8 e Bottom View HE ∠ALL ROUND E D E g pad pad Top View 0.9 0.7 g g 2.0 (79) 1.2 (47) mm (mil)Unit： 1.2 (47) 1.2 (47)