DC95G104V ETC2
Document overview
- PDF pages: 4
Technical content
Page 1
GE

Measurement & Control
NTC Interchangeable
Type 95 Series
Thermometrics Thermistors
Features
- Precision, solid state temperature sensor
- Interchangeability down to ±0.18°F (±0.1°C)
- Suitable for use over a range of -112°F to 302°F (–80°C to 150°C)
- High sensitivity, greater than –4%/°C at 77°F (25°C)
- Suitable for temperature measurement, control and compensation
- High reliability and stability over an interchangeable range
- Most popular Resistance (R) vs Temperature (T) curves are available
- Resin-coated for good mechanical strength and resistance to solvents
- Rugged construction
- For DC95: .012 in (0.3mm) diameter bare tinned-copper lead wires
- For EC95: .008 in (0.2mm) diameter bare tinned-alloylead wires
- For TK95: .010 in (.25mm) diameter PTFE insulated lead wires
Page 2
Type DC95 Specifications
NTC Interchangeable Thermistor Chip
Epoxy-coated, NTC interchangeable thermistor chips with bare tinned-copper lead wires.
Options
Consult Factory for Availability of Options
- Other resistance values in the range of 1000 Ω to 100 kΩ
- Other tolerances or ranges
- Alternative lead wires or lengths
- Non standard R vs T curves
- Controlled dimensions
- Special sensor assemblies or enclosures
Thermal and Electrical Properties
Dissipation Constant
Still air:
1 mW/°C
Stirred oil:
8 mW/°C
Thermal Time Constant
Still air:
10 seconds
Stirred oil:
1 second
Maximum Power at 77°F (25°C)
75 mW
De-rated from 100% at 77°F (25°C) to 0% at 212°F
(100°C)

Tinned-copper alloy leads 0.012 in (0.3 mm)
(2.4 mm) maximum
NTC Interchangeable Type DC95
Ordering Information
Select appropriate part number below for resistance and temperature tolerance desired.
R25°C Material S 32°F to 158°F
32°F to 158°F
32°F to 212°F
System (0°C to 70°C)
(0°C to 70°C)
(0 to 100°C)
±0.18°F (±0.1°C)
±0.36°F (±0.2°C)
±0.36°F (±0.2°C)
2000 F DC95F202V
DC95F202W
DC95F202Z
2252 F DC95F232V
DC95F232W
DC95F232Z
3000 F DC95F302V
DC95F302W
DC95F302Z
5000 F DC95F502V
DC95F502W
DC95F502Z
10000 F
DC95F103V
DC95F103W
DC95F103Z
10000 Y
DC95Y103V
DC95Y103W
DC95Y103Z
30000 H
DC95H303V
DC95H303W
DC95H303Z
50000 G
DC95G503V
DC95G503W
DC95G503Z
100000 Y
DC95Y104V
DC95Y104W
DC95Y104Z
100000 G
DC95G104V
DC95G104W
DC95G104Z
Page 3
Type EC95 Specifications
NTC Interchangeable Thermistor Chip
Epoxy-coated, NTC interchangeable thermistor chips with bare tinned 180 alloy lead-wires.
Options
Consult Factory for Availability of Options
- Other resistance values in the range of 1000 Ω to 100 kΩ
- Other tolerances or ranges
- Alternative lead-wires or lengths
- Non standard R vs T curves
- Controlled dimensions
- Special sensor assemblies or enclosures
Thermal and Electrical Properties
R25°C
Dissipation Constant Still air:
1 mW/°C
Stirred oil:
8 mW/°C
Thermal Time Constant Still air:
10 seconds
Stirred oil:
1 second
Maximum Power at 77°F (25°C) 75 mW
De-rated from 100% at 77°F (25°C) to 0% at 212°F (100°C)

Tinned alloy 180 leads Ø 0.008 in (0.20 mm)
Ø 0.095 in (2.4 mm) maximum
NTC Interchangeable Type EC95 dimensions
Ordering Information
Select appropriate part number below for resistance and temperature tolerance desired.
Material -4°F to 122°F
32°F to 158°F
32°F to 158°F
System (-20°C to 50°C)
(0°C to 70°C)
(0 to 70°C)
±0.36°F (±0.2°C)
±0.18°F (±0.1°C)
±0.36°F (±0.2°C)
2252 F EC95F232U EC95F232V EC95F232W
3000 F EC95F302U EC95F302V EC95F302W
5000 F EC95F502U EC95F502V EC95F502W
10000 F EC95F103U EC95F103V EC95F103W
10000 Y EC95Y103U EC95Y103V EC95Y103W
30000 H EC95H303U EC95H303V EC95H303W
50000 G EC95G503U EC95G503V EC95G503W
100000 G
EC95G104V EC95G104W
Page 4
Type TK95 Specifications
Insulated Lead NTC Interchangeable Thermistor Chip
Epoxy-coated, NTC interchangeable thermistor chips with PTFE insulated nickel lead-wires.
Options
Consult Factory for Availability of Options
- Other resistance values in the range of
1000 Ω to 100 kΩ
- Other tolerances or ranges
- Alternative lead wires or lengths
- Non standard R vs T curves
- Controlled dimensions
- Special sensor assemblies or enclosures
Thermal and Electrical Properties
Dissipation Constant
Still air:
1 mW/°C
Stirred oil:
8 mW/°C
Thermal Time Constant
Still air:
10 seconds
Stirred oil:
1 second
Maximum Power at 77°F (25°C)
75 mW
De-rated from 100% at 77°F (25°C) to 0% at 212°F (100°C)
Ø 0.01 in
0.27 in
(0.25 mm)
(7 mm)
±0.001
maximum

NTC Interchangeable Type TK95 dimensions
Ordering Information
Select appropriate part number below for resistance and temperature tolerance desired.
R25°C Material S 32°F to 158°F
32°F to 158°F
32°F to 212°F
System (0°C to 70°C)
(0°C to 70°C)
(0 to 100°C)
±0.18°F (±0.1°C)
±0.36°F (±0.2°C)
±0.36°F (±0.2°C)
2000 F TK95F202V
TK95F202W
TK95F202Z
2252 F TK95F232V
TK95F232W
TK95F232Z
3000 F TK95F302V
TK95F302W
TK95F302Z
5000 F TK95F502V
TK95F502W
TK95F502Z
10000 F
TK95F103V
TK95F103W
TK95F103Z
10000 Y
TK95Y103V
TK95Y103W
TK95Y103Z
30000 H
TK95H303V
TK95H303W
TK95H303Z
50000 G
TK95G503V
TK95G503W
TK95G503Z
100000 G
TK95G104V
TK95G104W
TK95G104Z
www.ge-mcs.com
920-273C
© 2011 General Electric Company. All Rights Reserved. Specifications are subject to change without notice. GE is a registered trademark of General Electric Company. Other company or product names mentioned in this document may be trademarks or registered trademarks of their respective companies, which are not affiliated with GE.