DATASHEET SEARCH SITE

Document overview

  • PDF pages: 4

Technical content

Page 1

PDF page 1 diagram

NTC

Interchangeable

Type 95 Series

Thermometrics Thermistors

Features

  • Precision, solid state temperature sensor
  • Interchangeability down to ±0.18°F (±0.1°C)
  • Suitable for use over a range of -112°F to 302°F (–80°C to 150°C)
  • High sensitivity, greater than –4%/°C at 77°F (25°C)
  • Suitable for temperature measurement, control and compensation
  • High reliability and stability over an interchangeable range

Amphenol

Advanced Sensors

  • Most popular Resistance (R) vs Temperature (T) curves are available
  • Resin-coated for good mechanical strength and resistance to solvents
  • Rugged construction
  • DC95: .012 in (0.3mm) diameter bare tinned copper lead wires
  • EC95: .008 in (0.2mm) diameter bare tinned Cu-Ni alloy lead wires
  • TK95: .010 in (.25mm) diameter PTFE/PFA Cu-Ni alloy lead wires

Page 2

Type DC95 Specifications

NTC Interchangeable Thermistor Chip

Epoxy-coated, NTC interchangeable thermistor chips with bare tinned copper lead wires.

Options

Consult Factory for Availability of Options

  • Other resistance values in the range of 1000 Ω to 100 kΩ
  • Other tolerances or ranges
  • Alternative lead wires or lengths
  • Non standard R vs T curves
  • Controlled dimensions
  • Special sensor assemblies or enclosures

Thermal and Electrical Properties

Dissipation Constant

Still air:

1 mW/°C

Stirred oil:

8 mW/°C

Thermal Time Constant

Still air:

10 seconds

Stirred oil:

1 second

Maximum Power at 77°F (25°C)

75 mW

De-rated from 100% at 77°F (25°C) to 0% at 212°F

(100°C)

PDF page 2 diagram

NTC Interchangeable Type DC95 dimensions

Ordering Information

Select appropriate part number below for resistance and temperature tolerance desired.

R25°C Material 32°F to 158°F 32°F to 158°F 32°F to 212°F System (0°C to 70°C) (0°C to 70°C) (0 to 100°C) ±0.18°F

±0.36°F

±0.36°F

(±0.1°C)

(±0.2°C)

(±0.2°C)

2000 F DC95F202V

DC95F202W DC95F202Z

2252 F DC95F232V

DC95F232W DC95F232Z

3000 F DC95F302V

DC95F302W DC95F302Z

5000 F DC95F502V

DC95F502W DC95F502Z

10000 F DC95F103V

DC95F103W DC95F103Z

10000 Y DC95Y103V

DC95Y103W DC95Y103Z

30000 H DC95H303V

DC95H303W DC95H303Z

50000 G DC95G503V

DC95G503W DC95G503Z

100000 Y

DC95Y104V

DC95Y104W DC95Y104Z

100000 G

DC95G104V

DC95G104W DC95G104Z

Notes:

1. For RoHS compliant product, please add

the suffix “N” to the part label. Example: DC95F103VN

2. For RoHS compliant product with applications

below 0°C, please add the suffix “H” to the part label. Example: DC95F103VH

Page 3

Type EC95 Specifications

NTC Interchangeable Thermistor Chip

Epoxy-coated, NTC interchangeable thermistor chips with bare tinned 180 alloy lead-wires.

Options

Consult Factory for Availability of Options

  • Other resistance values in the range of 1000 Ω to 100 kΩ
  • Other tolerances or ranges
  • Alternative lead-wires or lengths
  • Non standard R vs T curves
  • Controlled dimensions
  • Special sensor assemblies or enclosures

Thermal and Electrical Properties

Dissipation Constant

Still air:

1 mW/°C

Stirred oil:

8 mW/°C

Thermal Time Constant

Still air:

10 seconds

Stirred oil:

1 second

Maximum Power at 77°F (25°C)

75 mW

De-rated from 100% at 77°F (25°C) to 0% at 212°F (100°C)

PDF page 3 diagram

NTC Interchangeable Type EC95 dimensions

Ordering Information

Select appropriate part number below for resistance and temperature tolerance desired.

R25°C Material -4°F to 122°F

32°F to 158°F

32°F to 158°F

System (-20°C to 50°C) (0°C to 70°C)

(0 to 70°C)

±0.36°F (±0.2°C) ±0.18°F (±0.1°C) ±0.36°F (±0.2°C)

2252 F EC95F232U EC95F232V EC95F232W

3000 F EC95F302U EC95F302V EC95F302W

5000 F EC95F502U EC95F502V EC95F502W

10000 F

EC95F103U EC95F103V EC95F103W

10000 Y

EC95Y103U EC95Y103V EC95Y103W

30000 H

EC95H303U EC95H303V EC95H303W

50000 G

EC95G503U EC95G503V EC95G503W

100000 G

EC95G104V EC95G104W

Notes:

  1. For RoHS compliant product, please add the suffix “N” to the part label. Example: EC95F103VN
  1. For RoHS compliant product with applications below 0°C, please add the suffix “H” to the part label. Example: EC95F103VH

Page 4

Type TK95 Specifications

Insulated Lead NTC Interchangeable Thermistor Chip

Epoxy-coated, NTC interchangeable thermistor chips with PTFE/PFA insulated nickel lead-wires. RoHS compliant.

Options

Consult Factory for Availability of Options

  • Other resistance values in the range of 1000 Ω to 100 kΩ
  • Other tolerances or ranges
  • Alternative lead wires or lengths
  • Non standard R vs T curves
  • Controlled dimensions
  • Special sensor assemblies or enclosures

Thermal and Electrical Properties

Dissipation Constant

Still air:

1.5 mW/°C

Stirred oil:

8 mW/°C

Thermal Time Constant

Still air:

10 seconds

Stirred oil:

1 second

Maximum Power at 77°F (25°C)

75 mW

De-rated from 100% at 77°F (25°C) to 0% at 212°F (100°C)

Amphenol

Advanced Sensors

PDF page 4 diagram

NTC Interchangeable Type TK95 dimensions

Ordering Information

Select appropriate part number below for resistance and temperature tolerance desired.

R25°C Material 32°F to 158°F 32°F to 158°F System (0°C to 70°C)

(0°C to 70°C)

±0.18°F

±0.36°F

(±0.1°C)

(±0.2°C)

2000 F TK95F202V

TK95F202W

2252 F TK95F232V

TK95F232W

3000 F TK95F302V

TK95F302W

5000 F TK95F502V

TK95F502W

10000 F TK95F103V

TK95F103W

10000 Y TK95Y103V

TK95Y103W

30000 H TK95H303V

TK95H303W

50000 G TK95G503V

TK95G503W

100000 G

TK95G104V

TK95G104W

Note: For RoHS compliant product, please add the suffix “N” to the part label. Example: TK95F103VN

www.amphenol-sensors.com

© 2016 Amphenol Corporation. All Rights Reserved. Specifications are subject to change without notice. Other company names and product names used in this document are the registered trademarks or

trademarks of their respective owners.

AAS-920-273F 10/2016