DATASHEET SEARCH SITE

Document overview

  • PDF pages: 2

Technical content

Page 1

PDF page 1 diagram
PDF page 1 diagram

The E5771-01 is a voltage divider to operate a 28 mm Side-on photomultiplier tube. The compact configuration is convenient to attach di- rectly on tracing circuit board. Additionally, the built-in circuit utilizes transistor devices in the final three stages, so that the E5771-01 can give superior DC linearity characteristic under a low power consumption.

SPECIFICATIONS

Parameter Description / Value Unit
Applicable PMT 28 mm Side-on type —
Max. Supply Voltage between Case and Pins 1500 V
Max. Supply Voltage between Pin#1 and #11 1500 V
Max. Divider Current between Pin#1 and #11 0.29 mA
Max. Power Consumption Between Pin#1 and #11 0.44 (at 1500 V) W
Insulation Resistance between Case and Pins Min. 1 × 1011 Ω
Voltage Distribution Ratio among Pin#1 to #11 1: 1: 1: ...... : 1: 1: 1 —
Max. Linear Output in DC Mode Typ. 100 µA
Operating Temperature -20 to +50 °C

Figure 1: DC Linearity of E5771-01

(In the case of R928 with negative high voltage usage) TACCB0051EC

PDF page 1 diagram

OUTPUT ANODE CURRENT (A)

Figure 2: Maximum Output under ±1 % DC Linearity of E5771-01

(In the case of R928 with negative high voltage usage) TACCB0053EB

PDF page 1 diagram

SUPPLY VOLTAGE (V)

Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2011 Hamamatsu Photonics K.K.

Page 2

D-TYPE ACTIVE MODULE E5771-01

Figure 3: Dimensional Outline and Circuit Diagram

of E5771-01 (Unit: mm)

PDF page 2 diagram

(TOP VIEW) 7 6 8 5 9 E5771-01 10 4 HAMAMATSU 11 3 2 1

PDF page 2 diagram
PDF page 2 diagram

SUGGESTED PRINTED CIRCUIT BOARD LAYOUT FOR E5771-01

TACCA0180EC

Figure 5: The Example of How to Use

Figure 4: The Example of Completed Divider Circuit

with E5771-01

〈 FOR –HV〉

SIGNAL P

PMT

K

OUTPUT

DY1 DY2 DY3 DY4 DY5 DY6 DY7 DY8 DY9

PDF page 2 diagram

\*A -HV \*A

PDF page 2 diagram

TACCC0108EB

PDF page 2 diagram

TACCC112EB

CAUTION

PDF page 2 diagram

HAMAMATSU PHOTONICS K.K.

www.hamamatsu.com

HAMAMATSU PHOTONICS K.K., Electron Tube Division 314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205

U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: usa@hamamatsu.com Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: info@hamamatsu.de France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: infos@hamamatsu.fr United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW, United Kingdom, Telephone: 44-(0)1707-294888, Fax: 44(0)1707-325777 E-mail: info@hamamatsu.co.uk

North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: info@hamamatsu.se

TACC1050E01

Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 E-mail: info@hamamatsu.it

OCT. 2011. IP