DTSL-61R-B ETC2
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
PART NO. ECN # REV REVISIONS DESCRIPTION DRAWN DATE DATE DATECHECKD APPRVD S. K 11/4/06 11/4/06 25/4/06K. S N. KRELEASEDDTS Series This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change with- out notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the prod- ucts for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. MULTICOMP is the registered trademark of the Group. © Premier Farnell plc 2004. TOLERANCES: DRAWN BY: S. Krishna K. Suresh N. Kiwomya CHECKED BY: APPROVED BY: DATE: DRAWING TITLE: DTS Series - TACT Switches 233660_1_DWGM10000249 11/04/06 DATE: SIZE SCALE: NTS U.O.M.: mm (Inches) SHEET: 1 OF 6 DWG NO. ELECTRONIC FILE REV A11/04/06 A DATE: 25/04/06 UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE FOR REFERENCE PURPOSES ONLY. Features:
- Sharp click feel with a positive tactile feedback. Due to small movement distance (stroke), user experiences distinct sensation when the switch “clicks” into place.
- Ultraminiature and light weight structure suitable for high density mounting. Economic but high reliability.
- Insert moulding in the contact with special treatment prevents flux build-up during soldering and permits auto-dipping. PCB Layout Circuit Diagram Dimensions : Millimetres (Inches) DTSL - 61R-B General Tolerance Maximum ±0.20mm
PART NO. ECN # REV REVISIONS DESCRIPTION DRAWN DATE DATE DATECHECKD APPRVD S. K 11/4/06 11/4/06 25/4/06K. S N. KRELEASEDDTS Series This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change with- out notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the prod- ucts for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. MULTICOMP is the registered trademark of the Group. © Premier Farnell plc 2004. TOLERANCES: DRAWN BY: S. Krishna K. Suresh N. Kiwomya CHECKED BY: APPROVED BY: DATE: DRAWING TITLE: DTS Series - TACT Switches 233660_1_DWGM10000249 11/04/06 DATE: SIZE SCALE: NTS U.O.M.: mm (Inches) SHEET: 2 OF 6 DWG NO. ELECTRONIC FILE REV A11/04/06 A DATE: 25/04/06 UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE FOR REFERENCE PURPOSES ONLY. PCB Layout Circuit Diagram DTSGL-61K-B Dimensions : Millimetres (Inches) General Tolerance Maximum ±0.20mm
PART NO. ECN # REV REVISIONS DESCRIPTION DRAWN DATE DATE DATECHECKD APPRVD S. K 11/4/06 11/4/06 25/4/06K. S N. KRELEASEDDTS Series This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change with- out notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the prod- ucts for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. MULTICOMP is the registered trademark of the Group. © Premier Farnell plc 2004. TOLERANCES: DRAWN BY: S. Krishna K. Suresh N. Kiwomya CHECKED BY: APPROVED BY: DATE: DRAWING TITLE: DTS Series - TACT Switches 233660_1_DWGM10000249 11/04/06 DATE: SIZE SCALE: NTS U.O.M.: mm (Inches) SHEET: 3 OF 6 DWG NO. ELECTRONIC FILE REV A11/04/06 A DATE: 25/04/06 UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE FOR REFERENCE PURPOSES ONLY. Materials: Cover : Steel, tin plated. Base : Nylon thermoplastic. Colour : Black. Stem : Nylon thermoplastic. Colour : Black (100gf) and Red (260gf). Contact Disc : Phosphor bronze with silver cladding. Terminal : Brass with silver cladding. Specifications: Mechanical: Operation Force : 260 ±50gf Red (R) 100 ±50gf Black (K). Stroke : (6 x 6)0.25 (+0.2mm/-0.1mm). Operating Temperature Range : -25°C to +70°C. Storage Temperature Range : -30°C to +80°C. Vibration Test : MIL-STD-202F Method 201A. Frequency : 10 - 55 - 10Hz/1 minute. Directions : X, Y, Z, three mutually perpendicular directions. Time : 2 hours each direction. High reliability. Shock Test : MIL-STD-202F Method 213B. Condition A. Gravity : 50G (peak value), 11 milliseconds. Direction and Times : 6 sides and 3 times in each direction. High reliability.
PART NO. ECN # REV REVISIONS DESCRIPTION DRAWN DATE DATE DATECHECKD APPRVD S. K 11/4/06 11/4/06 25/4/06K. S N. KRELEASEDDTS Series This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change with- out notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the prod- ucts for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. MULTICOMP is the registered trademark of the Group. © Premier Farnell plc 2004. TOLERANCES: DRAWN BY: S. Krishna K. Suresh N. Kiwomya CHECKED BY: APPROVED BY: DATE: DRAWING TITLE: DTS Series - TACT Switches 233660_1_DWGM10000249 11/04/06 DATE: SIZE SCALE: NTS U.O.M.: mm (Inches) SHEET: 4 OF 6 DWG NO. ELECTRONIC FILE REV A11/04/06 A DATE: 25/04/06 UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE FOR REFERENCE PURPOSES ONLY. Specifications: Electrical: Electrical Life : 50,000 cycles for 260gf. 500,000 cycles for 100gf. Contact Resistance : 100m Ω maximum. Insulation Resistance : 100M Ω minimum at 500V dc. Dielectric Strength : 250V ac/1 minute. Contact Arrangement : 1 Pole 1 throw. Soldering Process: Hand Soldering : Use a soldering iron of 30 watts, controlled at 608°F (320°C) approximately 2 seconds while applying solder. Reflow Soldering : When applying reflow soldering, the peak temperature or the reflow oven should be set to 240°C maximum. Condition for soldering (Reflow and non-washable type). Part Number Table Rating Part Number 50mA at 12V dc DTSGL-61K-B DTSL-61R-B
PART NO. ECN # REV REVISIONS DESCRIPTION DRAWN DATE DATE DATECHECKD APPRVD S. K 11/4/06 11/4/06 25/4/06K. S N. KRELEASEDDTS Series This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change with- out notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the prod- ucts for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. MULTICOMP is the registered trademark of the Group. © Premier Farnell plc 2004. TOLERANCES: DRAWN BY: S. Krishna K. Suresh N. Kiwomya CHECKED BY: APPROVED BY: DATE: DRAWING TITLE: DTS Series - TACT Switches 233660_1_DWGM10000249 11/04/06 DATE: SIZE SCALE: NTS U.O.M.: mm (Inches) SHEET: 5 OF 6 DWG NO. ELECTRONIC FILE REV A11/04/06 A DATE: 25/04/06 UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE FOR REFERENCE PURPOSES ONLY. Part Number Explanation: Package Style Colour of Stem for Operating Force K Total Height Terminal L Product Series GDTS Switch Switch : Tactile Switch. Product Series : G = With Ground Terminal, = Without Ground Terminal. Terminal : L = With L S.M.T Terminal. Total Height : 1 = 2.5mm. Colour of Stem Operating Force : K = Black, R = Red. Package Style : B = Tube.
PART NO. ECN # REV REVISIONS DESCRIPTION DRAWN DATE DATE DATECHECKD APPRVD S. K 11/4/06 11/4/06 25/4/06K. S N. KRELEASEDDTS Series This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change with- out notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the prod- ucts for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. MULTICOMP is the registered trademark of the Group. © Premier Farnell plc 2004. TOLERANCES: DRAWN BY: S. Krishna K. Suresh N. Kiwomya CHECKED BY: APPROVED BY: DATE: DRAWING TITLE: DTS Series - TACT Switches 233660_1_DWGM10000249 11/04/06 DATE: SIZE SCALE: NTS U.O.M.: mm (Inches) SHEET: 6 OF 6 DWG NO. ELECTRONIC FILE REV A11/04/06 A DATE: 25/04/06 UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE FOR REFERENCE PURPOSES ONLY. Notes: For enquiries from all other markets International Sales Offices: AUSTRALIA– Farnell InOne Tel No: ++ 61 2 9645 8888 Fax No: ++ 61 2 9644 7898 FRANCE – Farnell InOne Tel No: ++ 33 474 68 99 99 Fax No: ++ 33 474 68 99 90 NORWAY– Farnell InOne Tel No: ++ 45 44 53 66 66 Fax No: ++ 45 44 53 66 02 AUSTRIA – Farnell InOne Tel No: ++ 43 662 2180 680 Fax No: ++ 43 662 2180 670 GERMANY – Farnell InOne Tel No: ++ 49 89 61 39 39 39 Fax No: ++ 49 89 613 59 01 PORTUGAL– Farnell InOne Tel No: ++ 34 93 475 8804 Fax No: ++ 34 93 474 5288 ESTONIA – Farnell InOne Tel No: ++ 358 9 560 7780 Fax No: ++ 358 9 345 5411 NETHERLANDS– Farnell InOne Tel No: ++ 31 30 241 7373 Fax No: ++ 31 30 241 7333 UK – Farnell InOne Tel No: ++ 44 8701 200 200 Fax No: ++ 44 8701 200 201 SINGAPORE– Farnell-Newark InOne Tel No: ++ 65 6788 0200 Fax No: ++ 65 6788 0300 HONG KONG– Farnell-Newark InOne Tel No: ++ 852 2268 9888 Fax No: ++ 852 2268 9899 BELGIUM – Farnell InOne Tel No: ++ 32 3 475 2810 Fax No: ++ 32 3 227 3648 BRAZIL – Farnell-Newark InOne Tel No: ++ 55 11 4066 9400 Fax No: ++ 55 11 4066 9410 IRELAND – Farnell InOne Tel No: ++ 353 1 830 9277 Fax No: ++ 353 1 830 9016 SPAIN– Farnell InOne Tel No: ++ 34 93 475 8805 Fax No: ++ 34 93 474 5107 CHINA – Farnell-Newark InOne Tel No: ++86 10 6238 5152 Fax No: ++86 10 6238 5022 ITALY– Farnell InOne Tel No: ++ 39 02 93 995 200 Fax No: ++ 39 02 93 995 300 SWEDEN – Farnell InOne Tel No: ++ 46 8 730 50 00 Fax No: ++ 46 8 83 52 62 MALAYSIA– Farnell-Newark InOne Tel No: ++ 60 3 7873 8000 Fax No: ++ 60 3 7873 7000 SWITZERLAND– Farnell InOne Tel No: ++ 41 1 204 64 64 Fax No: ++ 41 1 204 64 54 DENMARK – Farnell InOne Tel No: ++ 45 44 53 66 44 Fax No: ++ 45 44 53 66 06 UK – CPC ++ 44 8701 202 530 ++ 44 8701 202 531 UK – BuckHickman InOne ++ 44 8450 510 150 ++ 44 8450 510 130 NEW ZEALAND– Farnell InOne Tel No: ++ 64 9 357 0646 Fax No: ++ 64 9 357 0656 EXPORT – Farnell InOne Tel No: ++ 44 8701 200 208 Fax No: ++ 44 8701 200 209 export FINLAND – Farnell InOne Tel No: ++ 358 9 560 7780 Fax No: ++ 358 9 345 5411 http://www.farnellinone.com http://www.buckhickmaninone.com http://www.cpc.co.uk