DTD113ZK ROHM

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

DTD113ZK / DTD113ZU / DTD113ZS Transistors Rev.A 1/3 Digital transistors (built-in resistors) DTD113ZK / DTD113ZU / DTD113ZS zFeatures 1) Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors (see equivalent circuit). 2) The bias resistors consist of thin- film resistors negative biasing of the input. They also have the advan- tage of almost completely eliminat- ing parasitic effects. 3) Only the on/off conditions need to be set for operation, making device design easy. zStructure NPN digital transistor (Built-in resistor type) zEquivalent circuit IN GND OUT IN GND OUT zExternal dimensions (Unit : mm) 0~0.1 1.6 0.3~0.6 1.1 0.8 0.1 0.15 0.4 0.95 0.95 +0.2 -0.1 -0.1 +0.2 +0.1 -0.06 +0.1 -0.05 (2)(1) (3) 0~0.1 (2)(1) (3) 0.1~0.4 0.2 0.7 0.1 0.15 0.050.3 0.65 0.65 +0.1 -0 (1) GND (2) IN (3) OUT ROHM : UMT3 EIAJ : SC-70 (1) GND (2) IN (3) OUT ROHM : SMT3 EIAJ : SC-59 DTD113ZK DTD113ZU (15Min.) 2 0.2 0.450.5 0.45 (1) (2) (3) -0.05 +0.15 +0.15 -0.05 2.5 +0.4 -0.1 3Min. (1) GND (2) OUT (3) IN ROHM : SPT EIAJ : SC-72 DTD113ZS All terminals have same dimensions Abbreviated symbol: G21 Abbreviated symbol: G21 All terminals have same dimensions 2.9 0.2± 1.9 0.2± 2.8 0.2± 2.0 0.2± 0.9 0.1± ±4 0.2± 1.3 0.1± 1.25 0.1± 3 0.2± 2.1 0.1±

DTD113ZK / DTD113ZU / DTD113ZS Transistors Rev.A 2/3 zAbsolute maximum ratings (Ta=25°C) Parameter Symbol VCC 50 −5 to +10 500 200 300 150 −55 to +150 UK S V VIN V mA mW IC Pd Tj Tstg Unit Limits(DTD113Z ) Supply voltage Output current Power dissipation Junction temperature Storage temperature Input voltage zElectrical characteristics (Ta=25°C) Parameter Symbol VI(off) VI(on) VO(on) II IO(off) GI R2/R1 fT Min. 1.5 0.7 0.1 200 0.3 0.3 7.2 0.5 1.3 V VCC=5V, IO=100µA VO=0.3V, IO=20mA IO/II=50mA/2.5mA VI=5V VCC=50V, V=0V VO=5V, IO=50mA VCE=10V, IE=−50mA, f=100MHz V mA µA kΩ MHz Typ. Max. Unit Conditions Input voltage Output voltage Input current Output current DC current gain Input resistance Resistance ratio Transition frequency Transition frequency of the device∗ zPackaging specifications SMT3 SPT DTD113ZK Part No. DTD113ZU T146 3000 TP 5000 UMT3 T106 3000 DTD113ZS −− Package Packaging type Code Basic ordering unit (pieces) Taping Taping Taping

DTD113ZK / DTD113ZU / DTD113ZS Transistors Rev.A 3/3 zElectrical characteristic curves INPUT VOLTAGE : VI (on) (V) VO=0.3V 500µ 1m 2m 5m 10m 20m 50m100m200m 500m 500m 200m 100m 100 OUTPUT CURRENT : IO (A) Fig.1 Input voltage vs. output current (ON characteristics) Ta=−40°C 25°C 100°C OUTPUT CURRENT : Io (A) VCC=5V 10m 50µ 200µ 100µ 50µ 20µ 10µ INPUT VOLTAGE : VI (off) (V) Fig.2 Output current vs. input voltage (OFF characteristics) Ta=100°C 25°C −40°C VO=5V DC CURRENT GAIN : GI 500 200 100 1m 2m 5m 10m 20m 50m 500m100m200m 500µ Ta=100°C 25°C −40°C OUTPUT CURRENT : IO (A) Fig. 3 DC current gain vs. output current OUTPUT VOLTAGE : VO (on) (V) OUTPUT CURRENT : IO (A) Fig.4 Output voltage vs. output current lO/lI=20 500µ 1m 2m 5m 10m 20m 50m 500m100m200m 500m 200m 100m 50m 20m 10m 25°C −40°C Ta=100°C

Appendix1-Rev1.1 The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.