DS96F174MQML

DS96F172MQML/DS96F174MQML EIA-485/EIA-422 Quad Differential Drivers datasheet (Rev. A)

Document overview

• Manufacturer or author: Texas Instruments, Incorporated [SNOSAS8,A]
• PDF pages: 15

Technical content

DS96F172MQML,DS96F174MQML www.ti.com SNOSAS8A –APRIL 2011–REVISED APRIL 2013 DS96F172MQML/DS96F174MQMLEIA-485/EIA-422QuadDifferentialDrivers Check forSamples: DS96F172MQML ,DS96F174MQML 1FEATURES DESCRIPTION The DS96F172 and the DS96F174 are high speed 2• Meets EIA-485and EIA-422Standards quad differentiallinedriversdesignedto meet EIA-• Monotonic DifferentialOutput Switching 485 Standards.The DS96F172 and the DS96F174

• TRI-STATE Outputs offerimprovedperformancedue totheuse ofL-FAST bipolartechnology.The use of LFAST technology• Designed forMultipointbus Transmission allowsthe DS96F172 and DS96F174 to operateat• Common Mode Output VoltageRange: −7.0V higherspeeds whileminimizingpower consumption.to+12V The DS96F172 and theDS96F174 have TRI-STATE• Operates from Single+5.0V Supply outputsand are optimizedforbalanced multipoint• Reduced Power Consumption data bus transmissionat ratesup to 15 Mbps. The
• Thermal Shutdown Protection drivershave wide positiveand negativecommon mode range for multipointapplicationsin noisy• DS96F172 and DS96F174 areLead and environments.Positiveand negativecurrent-limitingFunctionCompatible withtheSN75172/174 or isprovidedwhich protectsthe driversfrom linefaulttheAM26LS31/MC3487 conditionsover a +12V to −7.0V common mode range.A thermalshutdown featureisalsoprovided. The DS96F172 featuresan activehighand activelow Enable,common to allfourdrivers.The DS96F174 featuresseparateactivehighEnablesforeach driver pair. Connection Diagrams Figure1.16-Lead CDIP Package-Top View Figure2.16-Lead CDIP Package-Top View DS96F172 DS96F174 (See Package Number NFE0016A) (See Package Number NFE0016A) Pleasebe aware thatan importantnoticeconcerningavailability,standardwarranty,and use incriticalapplicationsof Texas Instrumentssemiconductorproductsand disclaimerstheretoappearsattheend ofthisdatasheet. 2Alltrademarksarethepropertyoftheirrespectiveowners. PRODUCTION DATA informationiscurrentas ofpublicationdate. Copyright© 2011–2013,Texas InstrumentsIncorporatedProductsconform to specificationsper the terms of the Texas Instrumentsstandardwarranty.Productionprocessingdoes not necessarilyincludetestingofallparameters.

DS96F172MQML,DS96F174MQML SNOSAS8A –APRIL 2011–REVISED APRIL 2013 www.ti.com NC = No connection Figure3.20-Lead LCCC Package-Top View Figure4.20-Lead LCCC Package-Top View DS96F172 DS96F174 (seePackage Number NAJ0020A) (seePackage Number NAJ0020A) Logic Diagrams Figure5.DS96F172 Figure6.DS96F174

2 SubmitDocumentationFeedback Copyright© 2011–2013,Texas InstrumentsIncorporated

ProductFolderLinks:DS96F172MQML DS96F174MQML

DS96F172MQML,DS96F174MQML www.ti.com SNOSAS8A –APRIL 2011–REVISED APRIL 2013 FunctionTables(Each Driver) Table1.DS96F172 (1) Input Enable Outputs A E E Y Z H H X H L L H X L H H X L H L L X L L H X L H Z Z (1) H = HighLevel L = Low Level X = Don 'tCare Z = HighImpedance (Off) Table2.DS96F174 (1) Input Enable Outputs A E Y Z H H H L L H L H X L Z Z (1) H = HighLevel L = Low Level X = Don 'tCare Z = HighImpedance (Off) These deviceshave limitedbuilt-inESD protection.The leadsshouldbe shortedtogetherorthedeviceplacedinconductivefoam duringstorageorhandlingtopreventelectrostaticdamage totheMOS gates. AbsoluteMaximum Ratings(1) StorageTemperatureRange (TStg) −65°C ≤ TA ≤ +175°C Lead Temperature(Soldering,60 sec.) 300°C Maximum Package Power Dissipationat25°C (2) LCCC package 2,000mW CDIP package 1,800mW CeramicFlatpackpackage 1,000mW SupplyVoltage 7.0V EnableInputVoltage 5.5V (1) AbsoluteMaximum Ratingsindicatelimitsbeyond whichdamage tothedevicemay occur.OperatingRatingsindicateconditionsfor whichthedeviceisfunctional,butdo notverifyspecificperformancelimits.Forverifiedspecificationsand testconditions,see the ElectricalCharacteristics.The verifiedspecificationsapplyonlyforthetestconditionslisted.Some performancecharacteristicsmay degradewhen thedeviceisnotoperatedunderthelistedtestconditions. (2) Above TA = 25°C, derateLCCC package 13.3,CDIP package 12.5,Ceramicflatpackpackage 7.1mW/ °C Recommended OperatingConditions Min Max Units SupplyVoltage(VCC ) 4.50 5.50 V Common Mode OutputVoltage(VOC ) −7.0 +12.0 V OutputCurrentHigh(IOH ) −60 mA OutputCurrentLow (IOL ) 60 mA OperatingTemperature(TA) −55 +125 °C Copyright© 2011–2013,Texas InstrumentsIncorporated SubmitDocumentationFeedback 3 ProductFolderLinks:DS96F172MQML DS96F174MQML

DS96F172MQML,DS96F174MQML SNOSAS8A –APRIL 2011–REVISED APRIL 2013 www.ti.com QualityConformance Inspection Table3.Mil-Std-883,Method 5005 -Group A Subgroup Description Temp (°C)

1 Statictestsat +25

2 Statictestsat +125

3 Statictestsat -55

4 Dynamic testsat +25

5 Dynamic testsat +125

6 Dynamic testsat -55

7 Functionaltestsat +25

9 Switchingtestsat +25

10 Switchingtestsat +125

11 Switchingtestsat -55

12 Settlingtimeat +25

13 Settlingtimeat +125

14 Settlingtimeat -55

DS96F172/DS96F174 ElectricalCharacteristicsAC/DC Parameters(1) The followingconditionsapply,unlessotherwisespecified. DC: VCC = 5.5V AC: VCC = 5.0V Sub-Parameter TestConditions Notes Min Max Units groups

0.8 V 1

0.7 V 2,3

VIH Logical1 InputVoltage 2.0 V 1,2,3 VIC InputClamp Voltage I= -18mA -1.5 V 1,2,3 VOD1 DifferentialOutputVoltage IO = 0mA 6.0 V 1,2,3 1.5 V 1,2VCC = 4.5V,R L = 54ΩVOD2 DifferentialOutputVoltage Figure7 See (2) 1.2 V 3 VOD2 DifferentialOutputVoltage VCC = 4.5V,R L = 100Ω 2.0 V 1,2,3 Figure7 See (3) -200 200 mV 1,2 ΔVOD1 Change InMagnitudeofVOD2 VCC = 4.5V,R L = 54Ω See (2)(3) -400 400 mV 3 See (3) -200 200 mV 1,2 ΔVOD2 Change InMagnitudeofVOD2 VCC = 4.5V,R L = 100Ω See (2)(3) -400 400 mV 3 VOC Common Mode OutputVoltage R L = 54Ω 3.0 V 1,2,3 Figure7 VOC Common Mode OutputVoltage R L = 100Ω 3.0 V 1,2,3 Figure7 ΔVOC Change inMagnitudeofVOC VCC = 4.5V,R L = 54Ω -200 200 mV 1,2,3See (3) Figure7 ΔVOC Change inMagnitudeofVOC VCC = 4.5V,R L = 100Ω -200 200 mV 1,2,3See (4) Figure7 IO OutputCurrentWithPower Off VCC = 0V,VO = -7V to12V -50 50 µA 1,2,3 (1) Allcurrentsintothedevicepinsarepositive;allcurrentsoutofthedevicepinsarenegative.Allvoltagesarereferencetogroundunless otherwisespecified. (2) −55°C limitexceedsEIA standardRS −485 specification (3) Δ|VOD |isthechange inmagnitudeofVOD ,thatoccurswhen theinputischanged between highand lowlevels. (4) Δ|VOC |isthechange inmagnitudeoftheVOC thatoccurswhen theinputischanged between highand lowlevels.

4 SubmitDocumentationFeedback Copyright© 2011–2013,Texas InstrumentsIncorporated

ProductFolderLinks:DS96F172MQML DS96F174MQML

DS96F172MQML,DS96F174MQML www.ti.com SNOSAS8A –APRIL 2011–REVISED APRIL 2013 DS96F172/DS96F174 ElectricalCharacteristicsAC/DC Parameters(1)(continued) The followingconditionsapply,unlessotherwisespecified. DC: VCC = 5.5V AC: VCC = 5.0V Sub-Parameter TestConditions Notes Min Max Units groups IOZ HighImpedance StateOutputCurrent VO = -7V to12V -50 50 µA 1,2,3 IIH Logical1 InputCurrent VI= 2.4V 20 µA 1,2,3 IIL Logical0 InputCurrent VI= 0.4V -50 µA 1,2,3 ICC SupplyCurrent OutputsEnabled 50 mA 1,2,3 ICCX SupplyCurrent OutputsDisabled 30 mA 1,2,3 IOS1 ShortCircuitOutputCurrent VO = -7V See (5) -250 mA 1,2,3 IOS2 ShortCircuitOutputCurrent VO = 0V See (5) -150 mA 1,2,3 IOS3 ShortCircuitOutputCurrent VO = VCC See (5) 150 mA 1,2,3 IOS4 ShortCircuitOutputCurrent VO = 12V See (5) 250 mA 1,2,3 R L = 27Ω,C L = 15pF 25 ns 10,11 tPLH PropagationDelayLo toHilevel Figure10 16 ns 9 R L = 27Ω,C L = 15pF 25 ns 10,11 tPHL PropagationDelayHitoLow Level Figure10 16 ns 9 R L = 60Ω 10 ns 10,11 SKEW OutputtoOutputDelayTime 4 ns 9 OutputDisableTime From Low Level 40 ns 10,11R L = 110Ω,C L = 50pFtLZ Figure12 25 ns 9 OutputDisableTime From HighLevel 80 ns 10,11R L = 110Ω,C L = 50pFtHZ Figure11 30 ns 9 OutputEnableTime toLow Level R L = 110Ω,C L = 50pF 100 ns 10,11 tZL Figure12 40 ns 9 OutputEnableTime toHighLevel R L = 110Ω,C L = 50pF 40 ns 10,11 tZH Figure10 32 ns 9 30 ns 10,11R L = 60Ω,C L = 15pFtDD DifferentialOutputDelayTime Figure9 22 ns 9 DifferentialOutputTransitionTime 40 ns 10,11R L = 60Ω,C L = 15pFtTD Figure9 22 ns 9 (5) 0.2µF cap isconnectedbetween theoutputand Gnd toreduceoscillation. Copyright© 2011–2013,Texas InstrumentsIncorporated SubmitDocumentationFeedback 5 ProductFolderLinks:DS96F172MQML DS96F174MQML

DS96F172MQML,DS96F174MQML SNOSAS8A –APRIL 2011–REVISED APRIL 2013 www.ti.com PARAMETER MEASUREMENT INFORMATION Note 10:DS96F172 withactivehighand activelowEnablesisNote 10:DS96F172 withactivehighand activelowEnablesis shown.DS96F174 has activehighEnableonly.shown.DS96F174 has activehighEnableonly. Figure7.Differentialand Common Mode Output Figure8.DifferentialOutput VoltagewithVarying Voltage Common Mode Voltage Note 8:The inputpulseissuppliedby a generatorhavingthefollowingcharacteristics:f= 1.0MHz, dutycycle= 50%, tr ≤ 5.0ns,tf≤ 5.0ns,ZO = 50Ω. Note 9:C L includesprobeand jigcapacitance. Note 10:DS96F172 withactivehighand activelowEnablesisshown.DS96F174 has activehighEnableonly. Figure9. DifferentialOutput Delay and TransitionTimes Note 8:The inputpulseissuppliedby a generatorhavingthefollowingcharacteristics:f= 1.0MHz, dutycycle= 50%, tr ≤ 5.0ns,tf≤ 5.0ns,ZO = 50Ω. Note 9:C L includesprobeand jigcapacitance. Note 10:DS96F172 withactivehighand activelowEnablesisshown.DS96F174 has activehighEnableonly. Figure10. PropagationDelay Times

6 SubmitDocumentationFeedback Copyright© 2011–2013,Texas InstrumentsIncorporated

ProductFolderLinks:DS96F172MQML DS96F174MQML

DS96F172MQML,DS96F174MQML www.ti.com SNOSAS8A –APRIL 2011–REVISED APRIL 2013 PARAMETER MEASUREMENT INFORMATION (continued) Note 8:The inputpulseissuppliedby a generatorhavingthefollowingcharacteristics:f= 1.0MHz, dutycycle= 50%, tr ≤ 5.0ns,tf≤ 5.0ns,ZO = 50Ω. Note 9:C L includesprobeand jigcapacitance. Note 11:To testtheactivelowEnableE ofDS96F172 groundE and applyan invertedwaveform toE .DS96F174 has activehighEnableonly. Figure11. tZH and tHZ Note 8:The inputpulseissuppliedby a generatorhavingthefollowingcharacteristics:f= 1.0MHz, dutycycle= 50%, tr ≤ 5.0ns,tf≤ 5.0ns,ZO = 50Ω. Note 9:C L includesprobeand jigcapacitance. Note 11:To testtheactivelowEnableE ofDS96F172 groundE and applyan invertedwaveform toE .DS96F174 has activehighEnableonly. Figure12. tZL,tLZ,tLZL NOTE Formore informationsee ApplicationBulletin,ContactProductMarketing. Copyright© 2011–2013,Texas InstrumentsIncorporated SubmitDocumentationFeedback 7 ProductFolderLinks:DS96F172MQML DS96F174MQML

DS96F172MQML,DS96F174MQML SNOSAS8A –APRIL 2011–REVISED APRIL 2013 www.ti.com TYPICAL APPLICATION The linelengthshouldbe terminatedatbothends initscharacteristicimpedance. Stublengthsoffthemain lineshouldbe keptas shortas possible.

8 SubmitDocumentationFeedback Copyright© 2011–2013,Texas InstrumentsIncorporated

ProductFolderLinks:DS96F172MQML DS96F174MQML

DS96F172MQML,DS96F174MQML www.ti.com SNOSAS8A –APRIL 2011–REVISED APRIL 2013

REVISION HISTORY

Released Revision Section Changes 8–Apr-11 A New Release,Corporateformat 2 MDS datasheetsconvertedintoone Corp.data sheetformat.MNDS96F172M-X Rev 1A0 & MNDS96F174M-X Rev 1B0 willbe archived. Changes from Original(April2013)toRevisionA Page Copyright© 2011–2013,Texas InstrumentsIncorporated SubmitDocumentationFeedback 9 ProductFolderLinks:DS96F172MQML DS96F174MQML

www.ti.com 15-Jul-2026 PACKAGING INFORMATION Orderable part number Status (1) Material type (2) Package | Pins Package qty | Carrier RoHS (3) Lead finish/ Ball material (4) MSL rating/ Peak reflow (5) Op temp (°C) Part marking (6) 5962-9076501M2A Active Production LCCC (NAJ) | 20 50 | TUBE No Call TI Call TI -55 to 125 DS96F172ME /883 Q 5962-90765 01M2A ACO 01M2A >T 5962-9076501MEA Active Production CDIP (NFE) | 16 25 | TUBE No Call TI Call TI -55 to 125 DS96F172MJ/883 5962-9076501MEA Q 5962-9076502M2A Active Production LCCC (NAJ) | 20 50 | TUBE No Call TI Call TI -55 to 125 DS96F174ME /883 Q 5962-90765 02M2A ACO 02M2A >T 5962-9076502MEA Active Production CDIP (NFE) | 16 25 | TUBE No Call TI Call TI -55 to 125 DS96F174MJ/883 5962-9076502MEA Q 5962-9076502VEA Active Production CDIP (NFE) | 16 25 | TUBE No Call TI Call TI -55 to 125 DS96F174MJ-QMLV 5962-9076502VEA Q DS96F172ME/883 Active Production LCCC (NAJ) | 20 50 | TUBE No Call TI Call TI -55 to 125 DS96F172ME /883 Q 5962-90765 01M2A ACO 01M2A >T DS96F172MJ/883 Active Production CDIP (NFE) | 16 25 | TUBE No Call TI Call TI -55 to 125 DS96F172MJ/883 5962-9076501MEA Q DS96F174ME/883 Active Production LCCC (NAJ) | 20 50 | TUBE No Call TI Call TI -55 to 125 DS96F174ME /883 Q 5962-90765 02M2A ACO 02M2A >T DS96F174MJ-QMLV Active Production CDIP (NFE) | 16 25 | TUBE No Call TI Call TI -55 to 125 DS96F174MJ-QMLV 5962-9076502VEA Q DS96F174MJ/883 Active Production CDIP (NFE) | 16 25 | TUBE No Call TI Call TI -55 to 125 DS96F174MJ/883 5962-9076502MEA Q (1) Status: For more details on status, see our product life cycle. Addendum-Page 1

www.ti.com 15-Jul-2026 (2) Material type: When designated, preproduction parts are prototypes/experimental devices, and are not yet approved or released for full production. Testing and final process, including without limitation quality assurance, reliability performance testing, and/or process qualification, may not yet be complete, and this item is subject to further changes or possible discontinuation. If available for ordering, purchases will be subject to an additional waiver at checkout, and are intended for early internal evaluation purposes only. These items are sold without warranties of any kind. (3) RoHS values: Yes, No, RoHS Exempt. See the TI RoHS Statement for additional information and value definition. (4) Lead finish/Ball material: Parts may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead finish/Ball material values may wrap to two lines if the finish value exceeds the maximum column width. (5) MSL rating/Peak reflow: The moisture sensitivity level ratings and peak solder (reflow) temperatures. In the event that a part has multiple moisture sensitivity ratings, only the lowest level per JEDEC standards is shown. Refer to the shipping label for the actual reflow temperature that will be used to mount the part to the printed circuit board. (6) Part marking: There may be an additional marking, which relates to the logo, the lot trace code information, or the environmental category of the part. Multiple part markings will be inside parentheses. Only one part marking contained in parentheses and separated by a "~" will appear on a part. If a line is indented then it is a continuation of the previous line and the two combined represent the entire part marking for that device. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF DS96F174MQML, DS96F174MQML-SP :

• Military : DS96F174MQML
• Space : DS96F174MQML-SP NOTE: Qualified Version Definitions:
• Military - QML certified for Military and Defense Applications
• Space - Radiation tolerant, ceramic packaging and qualified for use in Space-based application Addendum-Page 2

PACKAGE MATERIALS INFORMATION www.ti.com 10-Aug-2026 TUBE L - Tube length T - Tube height W - Tube width B - Alignment groove width *All dimensions are nominal Device Package Name Package Type Pins SPQ L (mm) W (mm) T (µm) B (mm) 5962-9076501M2A NAJ LCCC 20 50 470 11 3810 0 5962-9076501MEA NFE CDIP 16 25 506.98 15.24 13440 NA 5962-9076502M2A NAJ LCCC 20 50 470 11 3810 0 5962-9076502MEA NFE CDIP 16 25 506.98 15.24 13440 NA 5962-9076502VEA NFE CDIP 16 25 506.98 15.24 13440 NA DS96F172ME/883 NAJ LCCC 20 50 470 11 3810 0 DS96F172MJ/883 NFE CDIP 16 25 506.98 15.24 13440 NA DS96F174ME/883 NAJ LCCC 20 50 470 11 3810 0 DS96F174MJ-QMLV NFE CDIP 16 25 506.98 15.24 13440 NA DS96F174MJ/883 NFE CDIP 16 25 506.98 15.24 13440 NA Pack Materials-Page 1

www.ti.com E20A (Rev F)

www.ti.com J16A (REV L)

IMPORTANT NOTICE AND DISCLAIMER TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, regulatory or other requirements. These resources are subject to change without notice. TI grants you permission to use these resources only for development of an application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you fully indemnify TI and its representatives against any claims, damages, costs, losses, and liabilities arising out of your use of these resources. TI’s products are provided subject to TI’s Terms of Sale, TI’s General Quality Guidelines, or other applicable terms available either on ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for TI products. Unless TI explicitly designates a product as custom or customer-specified, TI products are standard, catalog, general purpose devices. TI objects to and rejects any additional or different terms you may propose. IMPORTANT NOTICE Copyright © 2026, Texas Instruments Incorporated Last updated 10/2025