DRV601 Datasheet PDF & Specifications | DigiCamel IC Datasheet

Manufacturer Specifications

Compare DRV601 variants.

Select a manufacturer to view its specifications, local PDF, and searchable HTML text.

1 manufacturers / 5 documents

Manufacturer	Series	Package	Documents	Available	Select specification
Texas Instruments	-	-	5	PDF HTML	Viewing

Online Datasheet

Read the Texas Instruments document online.

DIRECTPATH (TM) STEREO LINE DRIVER datasheet (Rev. C)

Document overview

Manufacturer or author: Texas Instruments, Incorporated [SLOS553,C]
PDF pages: 21

Technical content

DIRECTPATH™ STEREOLINEDRIVER,ADJUSTABLEGAIN Check forSamples: DRV601 1FEATURES • IndependentRightand LeftChannel Shutdown Control 2• ExternalGain SettingResistors

Short-Circuitand Thermal Protection• Space Saving Package
Pop Reduction Circuitry– 20-Pin,4 mm × 4 mm Thin QFN, Thermally OptimizedPowerPAD ™ Package APPLICATIONS• Ground-Referenced Outputs Eliminate
Set-TopBoxesDC-Blocking Capacitor
CD /DVD Players– Reduce Board Area
DVD-Receivers– Reduce Component Cost • HTIB– Improve THD+N Performance • PDP /LCD TV's– No DegradationofLow-Frequency Response Due toOutput Capacitors
Wide Power Supply Range: 1.8V to4.5V
2 Vrms/Ch Output Voltageinto600 Ω at3.3V supply

DESCRIPTION

The DRV601 isa stereolinedriverdesignedto allowthe removal of the outputdc-blockingcapacitorsfor reduced component countand cost.The deviceisidealforsinglesupplyelectronicswhere sizeand costare criticaldesignparameters. The DRV601 iscapableof driving2 Vrms intoa 600-Ω loadat 3.3 V. The devicehas externalgainsetting resistors,thatsupporta gainrangeof-1V/Vto-10V/V,and lineoutputsthathas ±8-kV IEC ESD protection.The devicehas independentshutdowncontrolfortherightand leftaudiochannels. The DRV601 isavailableina 4 mm × 4 mm ThinQFN package. Pleasebe aware thatan importantnoticeconcerningavailability,standardwarranty,and use incriticalapplicationsofTexas Instrumentssemiconductorproductsand disclaimerstheretoappearsattheend ofthisdatasheet. 2DIRECTPATH, PowerPAD, DirectPatharetrademarksofTexas Instruments. PRODUCTION DATA informationiscurrentas ofpublicationdate. Copyright© 2008–2009,Texas InstrumentsIncorporatedProductsconform to specificationsper the terms of the Texas Instrumentsstandardwarranty.Productionprocessingdoes not necessarilyincludetestingofallparameters.

NC − No□internal□connection DRV601 These deviceshave limitedbuilt-inESD protection.The leadsshouldbe shortedtogetherorthedeviceplacedinconductivefoam duringstorageorhandlingtopreventelectrostaticdamage totheMOS gates. RTJ (QFN) PACKAGE (TOP VIEW) TERMINAL FUNCTIONS TERMINAL I/O DESCRIPTION NAME QFN C1P 1 I/O Charge pump flyingcapacitorpositiveterminal PGND 2 I Power ground,connecttoground. C1N 3 I/O Charge pump flyingcapacitornegativeterminal NC 4,6,8,12,16,20 No connection PVSS 5 O Outputfromchargepump. SVSS 7 I Amplifiernegativesupply,connecttoPVSS viastarconnection. OUTL 9 O Leftaudiochanneloutputsignal SVDD 10 I Amplifierpositivesupply,connecttoPVDD viastarconnection. OUTR 11 O Rightaudiochanneloutputsignal INL 13 I Leftaudiochannelinputsignal SDR 14 I Rightchannelshutdown,activelowlogic. INR 15 I Rightaudiochannelinputsignal SGND 17 I Signalground,connecttoground. SDL 18 I Leftchannelshutdown,activelowlogic. PVDD 19 I Supplyvoltage,connecttopositivesupply. Exposed Pad Exposed pad must be solderedtoa floatingplane.Do NOT connecttopower orground.

2 Copyright© 2008–2009,Texas InstrumentsIncorporated

ProductFolderLink(s):DRV601

ABSOLUTE MAXIMUM RATINGS (1) overoperatingfree-airtemperaturerange,TA = 25°C (unlessotherwisenoted) VALUE /UNIT Supplyvoltage,AVDD, PVDD –0.3V to5.5V VI Inputvoltage VSS – 0.3V toVDD + 0.3V R (Load) Minimum loadimpedance ≥ 100 Ω TA Operatingfree-airtemperaturerange –40°C to85°C TJ Operatingjunctiontemperaturerange 0°C to150°C Tstg Storagetemperaturerange –65°C to85°C (1) Stressesbeyond thoselistedunderabsolutemaximum ratingsmay cause permanentdamage tothedevice.These arestressratings only,and functionaloperationofthedeviceattheseorany otherconditionsbeyond thoseindicatedunderrecommended operating conditionsisnotimplied.Exposuretoabsolute-maximum-ratedconditionsforextendedperiodsmay affectdevicereliability. AVAILABLE OPTIONS TA PACKAGED DEVICES (1) PART NUMBER SYMBOL -40°C to85°C 20-pin,4 mm × 4 mm QFN DRV601RTJ (2) AKQ (1) Forthemost currentpackage and orderinginformation,see thePackage OptionAddendum attheend ofthisdocument,orsee theTI websiteatwww.ti.com. (2) The RTJ package isonlyavailabletapedand reeled.To order,add thesuffix“R ”totheend ofthepartnumber fora reelof3000,oradd thesuffix“T”totheend ofthepartnumber fora reelof250 (e.g.,DRV601RTJR). RECOMMENDED OPERATING CONDITIONS MIN MAX UNIT VSS Supplyvoltage,AVDD, PVDD 1.8 4.5(1) V VIH High-levelinputvoltage SDL, SDR 1.5 V VIL Low-levelinputvoltage SDL, SDR 0.5 V TA Operatingfree-airtemperature –40 85 °C (1) Devicecan shutdown forVDD > 4.5V topreventdamage tothedevice.

ELECTRICAL CHARACTERISTICS

TA = 25°C (unlessotherwisenoted) PARAMETER TEST CONDITIONS MIN TYP MAX UNIT |VOS | Outputoffsetvoltage VDD = 1.8V to4.5V,Inputsgrounded 8 mV PSRR Power SupplyRejectionRatio VDD = 1.8V to4.5V 88 dB VOH High-leveloutputvoltage VDD = 3.3V,R L = 600 Ω 3.10 V VOL Low-leveloutputvoltage VDD = 3.3V,R L = 600 Ω –3.05 V |IIH| High-levelinputcurrent(SDL, SDR) VDD = 4.5V,VI= VDD 1 µA |IIL| Low-levelinputcurrent(SDL, SDR) VDD = 4.5V,VI= 0 V 1 µA VDD = 1.8V,No load,SDL= SDR = VDD 5.3 VDD = 3.3V,No load,SDL = SDR = VDD 7.1 mA IDD SupplyCurrent VDD = 4.5V,No load,SDL = SDR = VDD 8.7 Shutdown mode, VDD = 1.8V to4.5V 1 µA Copyright© 2008–2009,Texas InstrumentsIncorporated 3 ProductFolderLink(s):DRV601

VDD = 3.3V ,TA = 25°C, R L = 600 Ω,C (PUMP) = C (PVSS) = 1 µF ,C IN = 1 µF,R in= 10 kΩ,R fb = 20 kΩ (unlessotherwisenoted) PARAMETER TEST CONDITIONS MIN TYP MAX UNIT THD = 1%, VDD = 3.3V,f= 1 kHz 2.1 THD = 1%, VDD = 4.5V,f= 1 kHz 2.7VO OutputVoltage(OutputsInPhase) VRMS THD = 1%, VDD = 4.5V,f= 1 kHz,R L = 2.8100 kΩ VO = 2 Vrms,f= 1 kHz 0.008% THD+N Totalharmonicdistortionplusnoise VO = 2 Vrms,f= 6.67kHz 0.030% Crosstalk VO = 2 Vrms,f= 1 kHz -80 dB Avo Open-loopvoltagegain 155 dB R in Inputresistorrange 1 10 47 kΩ R fb Feedback resistorrange 4.7 20 100 kΩ Slew rate 2.2 V/µs Maximum capacitiveload 300 pF Vn Noiseoutputvoltage 22-kHzfilter,A-weighted 10 µVrms ESD Electrostaticdischarge OUTR, OUTL ±8 kV fosc Charge pump switchingfrequency 225 450 690 kHz Start-uptimefromshutdown 450 µs Inputimpedance 1 M Ω Vo = 2 Vrms (THD+N = 0.1%),22-kHzBW,SNR Signal-to-noiseratio 105 dBA-weighted G (bw) UnityGain Bandwidth 3.5 MHz Threshold 150 170 °C Thermalshutdown Hysteresis 15 °C

4 Copyright© 2008–2009,Texas InstrumentsIncorporated

ProductFolderLink(s):DRV601

Functional□Block□Diagram Rin SVDD SVDD SVSS SVSS SGND Audio□Out - R Audio□Out - L Short Circuit Protection Charge PumpBias CircuitrySDx C 1N C 1P PVSS Rin Rfb Rfb DRV601 FunctionalBlock Diagram Copyright© 2008–2009,Texas InstrumentsIncorporated 5 ProductFolderLink(s):DRV601

V -□Output□Voltage□-□VrmsO 0.001 0.01 0.1 V =□1.8□V, R =□100□k , f□=□1□kHz DD L /c87 0.001 0.01 0.1 THD□+□N□-□total□Harmonic□Distortion□+□Noise□-□%3m 310m 100m 500m 2 V -□Output□Voltage□-□VrmsO V =□3.3□V, R =□100□k , f□=□1□kHz DD L /c87 0.001 0.01 0.1 THD□+□N□-□total□Harmonic□Distortion□+□Noise□-□%3m 310m 100m 500m 2 V -□Output□Voltage□-□VrmsO V =□4.5□V, R =□100□k , f□=□1□kHz DD L /c87 0.001 0.01 0.1 THD□+□N□-□total□Harmonic□Distortion□+□Noise□-□%3m 310m 100m 500m 2 V -□Output□Voltage□-□VrmsO V =□3.3□V, R =□600 , f□=□1□kHz DD L /c87 0.001 0.01 0.1 THD□+□N□-□total□Harmonic□Distortion□+□Noise□-□%3m 310m 100m 500m 2 V -□Output□Voltage□-□VrmsO V =□1.8□V, R =□600 , f□=□1□kHz DD L /c87 0.001 0.01 0.1 THD□+□N□-□total□Harmonic□Distortion□+□Noise□-□%3m 310m 100m 500m 2 V -□Output□Voltage□-□VrmsO V =□4.5□V, R =□600 , f□=□1□kHz DD L /c87 DRV601 TYPICAL CHARACTERISTICS C (PUMP) = C (PVSS) = 1 µF ,C IN = 1 µF,R in= 10 kΩ,R fb = 20 kΩ (unlessotherwisenoted) TableofGraphs FIGURE Totalharmonicdistortion+ noise vs OutputVoltage 1-6 Totalharmonicdistortion+ noise vs Frequency 7-8 Quiescentsupplycurrent vs Supplyvoltage 9 Outputspectrum 10 Gain and phase vs Frequency 11-12 TOTAL HARMONIC DISTORTION + NOISE TOTAL HARMONIC DISTORTION + NOISE TOTAL HARMONIC DISTORTION + NOISE vs vs vs OUTPUT VOLTAGE OUTPUT VOLTAGE OUTPUT VOLTAGE Figure1. Figure2. Figure3. TOTAL HARMONIC DISTORTION + NOISE TOTAL HARMONIC DISTORTION + NOISE TOTAL HARMONIC DISTORTION + NOISE vs vs vs OUTPUT VOLTAGE OUTPUT VOLTAGE OUTPUT VOLTAGE Figure4. Figure5. Figure6.

6 Copyright© 2008–2009,Texas InstrumentsIncorporated

ProductFolderLink(s):DRV601

f□-□frequency□-□Hz 0.001 0.01 0.1 V =□3.3□V, R =□600 , 2□Vrms DD L /c87 20 20k50 100 500 1k 2k 5k f□-□frequency□-□Hz 0.001 0.01 0.1 V =□3.3□V, R =□600 , 200□mVrms DD L /c87 V -□Supply□Voltage□-□VDD I -□Supply□Current□-□mADD R =□600 , No□Load L /c87 -140 -120 -100 -80 -60 -40 -20 0 20k10k f□-□frequency□-□Hz FFT□-□dBr V =□3.3□V, R =□600 , G□=□-60dB DD L /c87 3.5 4.5 5.5 6.5 20 100k100 1k 2k 10k f□-□frequency□-□Hz Gain□-□dB V =□3.3□V, R =□600 , 2□Vrms DD L /c87 -200 -175 -150 -125 -100 -75 -50 -25 20 100k100 1k 2k 10k f□-□frequency□-□Hz Phase□-□deg V =□3.3□V, R =□600 , 2□Vrms DD L /c87 DRV601 TOTAL HARMONIC DISTORTION + NOISE TOTAL HARMONIC DISTORTION + NOISE QUIESCENT SUPPLY CURRENT vs vs vs FREQUENCY FREQUENCY SUPPLY VOLTAGE Figure7. Figure8. Figure9. FFT GAIN PHASE vs vs vs FREQUENCY FREQUENCY FREQUENCY Figure10. Figure11. Figure12. Copyright© 2008–2009,Texas InstrumentsIncorporated 7 ProductFolderLink(s):DRV601

f =c

2 R C/c112L O

C =O

2 R f/c112L c

APPLICATION INFORMATION

Single-supplyLine Driveramplifierstypicallyrequiredc-blockingcapacitors.The top drawing in Figure13 illustratestheconventionalLineDriveramplifierconnectiontotheloadand outputsignal. DC blockingcapacitorsare oftenlargein value.The lineload (typicalresistivevaluesof 600 Ω to 10 kΩ) combine withthedc blockingcapacitorstoforma high-passfilter.Equation1 shows therelationshipbetween the loadimpedance (RL),thecapacitor(CO ),and thecutofffrequency(fC ). (1) C O can be determinedusingEquation2,where theloadimpedance and thecutofffrequencyareknown. (2) IffC islow,thecapacitormust thenhave a largevaluebecause theloadresistanceissmall.Largecapacitance valuesrequirelargepackage sizes.Large package sizesconsume PCB area,stand high above the PCB, increasecostofassembly,and can reducethefidelityoftheaudiooutputsignal. Figure13. AmplifierApplications The DirectPath™ amplifierarchitectureoperatesfroma singlesupplybutmakes use ofan internalchargepump toprovidea negativevoltagerail.Combining theuserprovidedpositiverailand thenegativerailgeneratedby theIC,thedeviceoperatesinwhat iseffectivelya splitsupplymode. The outputvoltagesare now centeredat zerovoltswiththecapabilitytoswingtothepositiverailornegativerail.The DirectPath™ amplifierrequiresno output dc blockingcapacitors.The bottom block diagram and waveform of Figure 13 illustratethe ground-referencedLineDriverarchitecture.ThisisthearchitectureoftheDRV601.

8 Copyright© 2008–2009,Texas InstrumentsIncorporated

ProductFolderLink(s):DRV601

Charge Pump FlyingCapacitorand PVSS Capacitor The chargepump flyingcapacitorservestotransferchargeduringthegenerationofthenegativesupplyvoltage. The PVSS capacitormust be at leastequalto the charge pump capacitorinorderto allowmaximum charge transfer.Low ESR capacitorsare an idealselection,and a valueof 1µF istypical.Capacitorvaluesthatare smallerthan1µF can be used,butthemaximum outputvoltagemay be reducedand thedevicemay notoperate tospecifications. Decoupling Capacitors The DRV601 isa DirectPath™ LineDriveramplifierthatrequireadequate power supplydecouplingto ensure thatthe noise and totalharmonic distortion(THD) are low.A good low equivalent-series-resistance(ESR) ceramiccapacitor,typically2.2µF, placedas closeas possibletothedeviceVDD leadworks best.Placingthis decouplingcapacitorclosetotheDRV601 isimportantfortheperformanceoftheamplifier.For filteringlower frequencynoisesignals,a 10-µF orgreatercapacitorplacedneartheaudiopower amplifierwould alsohelp,but itisnotrequiredinmost applicationsbecause ofthehighPSRR ofthisdevice. Gain settingresistorsranges The gainsettingresistors,R in and R fb, must be chosen so thatnoise,stabilityand inputcapacitorsizeof the DRV601 iskeptwithinacceptablelimits.Voltagegainisdefinedas R fb dividedby R in. Selectingvaluesthataretoolow demands a largeinputac-couplingcapacitor,C IN .Selectingvaluesthataretoo high increasesthe noise of the amplifier.Table 1 liststhe recommended resistorvaluesfordifferentgain settings. Table1.Recommended ResistorValues Gain InputResistorValue,R in Feedback ResistorValue,R fb -1V/V 10 kΩ 10 kΩ -1.5V/V 10 kΩ 15 kΩ -2V/V 10 kΩ 20 kΩ -10V/V 4,7kΩ 47 kΩ Input-BlockingCapacitors DC input-blockingcapacitorsare requiredtobe added inserieswiththeaudiosignalintotheinputpinsofthe DRV601. These capacitorsblocktheDC portionoftheaudiosourceand allowtheDRV601 inputstobe properly biasedtoprovidemaximum performance. These capacitorsform a high-passfilterwiththe inputresistor,R in. The cutofffrequencyiscalculatedusing Equation3.For thiscalculation,thecapacitanceused istheinput-blockingcapacitorand theresistanceisthe inputresistorchosen fromthegaintableabove,thenthefrequencyand/orcapacitancecan be determinedwhen one ofthetwo valuesaregiven. (3) Supply VoltageLimitingAt 4.5V The DRV601 have a built-inchargepump which servestogeneratea negativerailforthelinedriver.Because thelinedriveroperatesfrom a positivevoltageand negativevoltagesupply,circuitryhas been implementedto protectthedevicesintheamplifierfroman overvoltagecondition.Once thesupplyisabove 4.5V, theDRV601 can shutdown inan overvoltageprotectionmode topreventdamage tothedevice.The DRV601 resume normal operationonce thesupplyisreducedto4.5V orlower. Capacitiveload The DRV601 has theabilitytodrivea highcapacitiveloadup to330pF directly,highercapacitiveloadscan be acceptedby addinga seriesresistorof 10Ω or larger.The figurebelow shows a 10kHz signalintoa 470pF capacitorusingthe10R seriesresistor. Copyright© 2008–2009,Texas InstrumentsIncorporated 9 ProductFolderLink(s):DRV601

t − Time□=□20□ms/div Ch21 V/div DRV601 SQUARE WAVE OUTPUT VOLTAGE with CAPACITIVE LOAD Figure14. Layout Recommendations A proposedlayoutfortheDRV601 can be seen intheDRV601EVM user'sguide,SLOU215 ,and theGerberfiles can be downloadedon www.ti.com,open theDRV601 productfolderand lookintheTools& Softwarefolder. Exposed Pad On DRV601RTJ Package The exposed metalpad on theDRV601RTJ package must be soldereddown toa pad on thePCB inorderto maintainreliability.The pad on thePCB shouldbe allowedtofloatand notbe connectedtoground or power. Connectingthispad to power or ground preventsthe devicefrom workingproperlybecause itisconnected internallytoPVSS. SGND and PGND Connections The SGND and PGND pinsoftheDRV601 must be routedback tothedecouplingcapacitorseparatelyinorder toprovideproperdeviceoperation.IftheSGND and PGND pinsare connecteddirectlytoeach other,thepart functionswithoutriskoffailure,butthenoiseand THD performancedo notmeet thespecifications. Gain settingresistors The gainsettingresistors,R in and R fb , must be placedcloseto pin13 respectivelypin17 to minimizethe capacitiveloadingon theseinputpinsand toensuremaximum stabilityoftheDRV601. For therecommenced PCB layout,see theDRV601EVM userguide.

10 Copyright© 2008–2009,Texas InstrumentsIncorporated

ProductFolderLink(s):DRV601

Audio□In□-□R Audio□In□-□L SGND Audio□Out□-□R Audio□Out□-□L SDL C1N RightOutput PVSSSDR PGND PVDD SVDD Shutdown Control PCM1773 VOUT_R VOUT_L 330□pF Left□Output VCC 47□k/c87 33□pF 3.3□V

1 F/c109 15□k/c87

15□k/c871 F/c109 33□k/c87 33□k/c87 33□pF 330□pF 47□k/c87

1 F/c109

Figure15. ApplicationCircuit

REVISION HISTORY

www.ti.com 11-Nov-2025 PACKAGING INFORMATION Orderable part number Status (1) Material type (2) Package | Pins Package qty | Carrier RoHS (3) Lead finish/ Ball material (4) MSL rating/ Peak reflow (5) Op temp (°C) Part marking (6) DRV601RTJR Active Production QFN (RTJ) | 20 3000 | LARGE T&R Yes NIPDAU Level-2-260C-1 YEAR -40 to 85 DRV601 DRV601RTJR.A Active Production QFN (RTJ) | 20 3000 | LARGE T&R Yes NIPDAU Level-2-260C-1 YEAR -40 to 85 DRV601 DRV601RTJRG4 Active Production QFN (RTJ) | 20 3000 | LARGE T&R Yes NIPDAU Level-2-260C-1 YEAR -40 to 85 DRV601 DRV601RTJT Active Production QFN (RTJ) | 20 250 | SMALL T&R Yes NIPDAU Level-2-260C-1 YEAR -40 to 85 DRV601 DRV601RTJT.A Active Production QFN (RTJ) | 20 250 | SMALL T&R Yes NIPDAU Level-2-260C-1 YEAR -40 to 85 DRV601 (1) Status: For more details on status, see our product life cycle. (2) Material type: When designated, preproduction parts are prototypes/experimental devices, and are not yet approved or released for full production. Testing and final process, including without limitation quality assurance, reliability performance testing, and/or process qualification, may not yet be complete, and this item is subject to further changes or possible discontinuation. If available for ordering, purchases will be subject to an additional waiver at checkout, and are intended for early internal evaluation purposes only. These items are sold without warranties of any kind. (3) RoHS values: Yes, No, RoHS Exempt. See the TI RoHS Statement for additional information and value definition. (4) Lead finish/Ball material: Parts may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead finish/Ball material values may wrap to two lines if the finish value exceeds the maximum column width. (5) MSL rating/Peak reflow: The moisture sensitivity level ratings and peak solder (reflow) temperatures. In the event that a part has multiple moisture sensitivity ratings, only the lowest level per JEDEC standards is shown. Refer to the shipping label for the actual reflow temperature that will be used to mount the part to the printed circuit board. (6) Part marking: There may be an additional marking, which relates to the logo, the lot trace code information, or the environmental category of the part. Multiple part markings will be inside parentheses. Only one part marking contained in parentheses and separated by a "~" will appear on a part. If a line is indented then it is a continuation of the previous line and the two combined represent the entire part marking for that device. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1

PACKAGE MATERIALS INFORMATION www.ti.com 24-Jul-2025 TAPE AND REEL INFORMATION Reel Width (W1) REEL DIMENSIONS A0B0K0WDimension designed to accommodate the component lengthDimension designed to accommodate the component thicknessOverall width of the carrier tapePitch between successive cavity centersDimension designed to accommodate the component width TAPE DIMENSIONSK0 P1B0WA0Cavity QUADRANT ASSIGNMENTS FOR PIN 1 ORIENTATION IN TAPE Pocket QuadrantsSprocket HolesQ1Q1Q2Q2Q3Q3Q4Q4User Direction of Feed P1ReelDiameter *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Reel Diameter (mm) Reel Width W1 (mm) (mm) (mm) (mm) (mm) W (mm) Pin1 Quadrant Pack Materials-Page 1

PACKAGE MATERIALS INFORMATION www.ti.com 24-Jul-2025 TAPE AND REEL BOX DIMENSIONS Width (mm) W LH *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) DRV601RTJR QFN RTJ 20 3000 353.0 353.0 32.0 DRV601RTJT QFN RTJ 20 250 213.0 191.0 35.0 Pack Materials-Page 2

www.ti.com GENERIC PACKAGE VIEW This image is a representation of the package family, actual package may vary. Refer to the product data sheet for package details. WQFN - 0.8 mm max heightRTJ 20 PLASTIC QUAD FLATPACK - NO LEAD4 x 4, 0.5 mm pitch 4224842/A

7<3VIA15(1.1)TYP161161015(3.8)2120X (0.24)

R E V I S I O N SREVDESCRIPTIONECRDATEENGINEER / DRAFTSMANA RELEASE NEW DRAWING216073610/24/2016T. TANG / H. DENGSIZESCALEREVAPAGEOF55NTS4219125A

IMPORTANT NOTICE AND DISCLAIMER TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, regulatory or other requirements. These resources are subject to change without notice. TI grants you permission to use these resources only for development of an application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you fully indemnify TI and its representatives against any claims, damages, costs, losses, and liabilities arising out of your use of these resources. TI’s products are provided subject to TI’s Terms of Sale, TI’s General Quality Guidelines, or other applicable terms available either on ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for TI products. Unless TI explicitly designates a product as custom or customer-specified, TI products are standard, catalog, general purpose devices. TI objects to and rejects any additional or different terms you may propose. IMPORTANT NOTICE Copyright © 2025, Texas Instruments Incorporated Last updated 10/2025

Selected Specification

Texas Instruments DRV601 overview.

Overview

DRV601 is listed in the Driver IC category. Available datasheets include documents from Texas Instruments. DigiCamel provides a local PDF and searchable HTML technical text for online reference.

Summary

DIRECTPATH??STEREO LINE DRIVER, ADJUSTABLE GAIN

Description

DIRECTPATH??STEREO LINE DRIVER, ADJUSTABLE GAIN

Source title DRV601_08 Datasheet(PDF) - Texas Instruments

Related Parts

More parts from the same family.

Browse manufacturer