DR65-0001 MACOM

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

n High Speed CMOS Technology n Complementary Outputs n Positive Voltage Control n Low Power Dissipation n Plastic SOIC Package for SMT Applications n Tape and Reel Packaging Available

Description

M/A-COM's DR65 -0001 is a Quad channel driver used to translat e TTL control inputs into gate voltages for GaAs FET microwave switches and attenuators. High speed analog CMOS technology is ut ilized to achieve low power dissipation at moderate to high speeds, encompassing most microwave switching applications. Package outline conforms to JEDEC standard MS-012AC Symbol Parameter1 Unit Min Typical Max VCC Positive DC Supply Voltage V 4.5 5.0 5.5 VEE Negative DC Supply Voltage V -5.5 -5.0 -4.5 TA Operating Ambient Temperature °C -40 +25 +85 IOH DC Output Current - HIGH mA — — -1.0 IOL DC Output Current - LOW mA — — 1.0 Trise, Tfall Maximum Input Rise or Fall Time nS — — 500 Logic Diagram 1. All voltages are relative to GND. Cx Ax Bx

Quad Driver for GaAs FET Switches and Attenuators DR65-0001 Specifications subject to change without notice. n North America: Tel. (800) 366-2266 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 Visit www.macom.com for additional data sheets and product information. V 6.00 Absolute Maximum Ratings Parameter Absolute Maximum VCC - .5V to + 6.0 V VEE - 6.0 V to - .5 V VCC - VEE 12 V V IN VCC + .5 V V OUT VEE - .5 V Storage Temperature -65°C to +150°C Operating Temperature -40°C to +85°C PIN Function PIN Function

1 A3 9 C2

2 B3 10 C1

3 A4 11 GND

4 B4 12 GND

5 VEE 13 A1

6 VCC 14 B1

7 C4 15 A2

8 C3 16 B2

Symbol Parameter Test Conditions Units Min Typ Max VIH Input HIGH Voltage Guaranteed HIGH Input Voltage V 2.0 — - VIL Input LOW Voltage Guaranteed LOW Input Voltage V - — 0.8 VOH Output HIGH Voltage IOH = -1 mA VEE = Max V - 0.1 — - VOL Output LOW Voltage IOL = 1 mA VEE = Max V — — VEE + 0.1 IIN Input Current VIN = VCC or GND VEE = Min µA -10 0 10 ICC Quiescent Supply Current VCC = Max VEE = Min VIN = VCC or GND µA — — 400 Δ ICC Additional Supply Current, per TTL Input pin VCC = Max VIN = VCC - 2.1V mA — — 1.0 TPHL, TPLH Propagation Delay Guaranteed -40° C to + 85° C nS — — 50 TTHL, TTLH Output Transition Time Guaranteed -40° C to + 85° C nS — — 25 Delay Skew, Output A to Output B Guaranteed -40° C to + 85° C nS — — 8 AC & DC Characteristics Over Guaranteed Operating Range See Switching Wave Forms for the definition of the switching terms. Supplies must be by-passed with .01 µF Capacitors. Unused inputs must be tied to Ground Notes: Switching Waveforms TF TR TTLH TTHL TPLH TPHL 1.3 V 90% 50% 10% 90% 10% INPUT C VIN GND LOGIC 1 LOGIC 0 OUTPUT A VOUT OUTPUT B VEE Truth Table Input CX AX BX

0 VEE GND

1 GND VEE

DR65-0001TR Tape & Reel (1K Reel)

Ordering Information

  1. Standard CMOS TTL interface, latch-up will occur if logic signal is applied prior to power supply.