DME SKYWORKS
Document overview
- PDF pages: 20
Technical content
Page 1
DATA SHEET
DME, DMF, DMJ Series: Silicon Beam-Lead Schottky Mixer
Diodes – Singles, Pairs, and Quads in Ceramic Hermetic
Packages
Applications
Microwave integrated circuits Mixers Detectors
Features
Low 1/f noise Low intermodulation distortion Hermetically sealed packages Statistical process control wafer fabrication Packages rated MSL1, 260 C per JEDEC J-STD-020)
Description
The Isolink silicon Schottky barrier mixer diodes are designed for applications through 20 GHz. Schottky barrier mixer diodes are made by the deposition of a suitable barrier metal on an epitaxial silicon substrate to form the junction. The process and choice of materials result in low series resistance with a narrow spread of capacitance values for close impedance control. A variety of forward voltages are available ranging from low values for low, or starved, local oscillator drive levels to high values for high drive, low distortion mixer applications. These Schottky barrier mixer diodes are available in a wide range of packages. Capacitance ranges and series resistances are comparable with the
packaged devices that are available up to, and including, the Ka- band. Schottky barrier diodes are categorized by universal mixer applications in six frequency ranges: S, C, X, Ku, K, and Ka bands as noted in Table 1. They may also be used as modulators and high-speed switches.

The absolute maximum ratings of the DME, DMF, and DMJ series of Schottky mixer diodes are provided in Table 2. Electrical and physical specifications are provided in Tables 3 through 9. Typical performance characteristics are shown in Figures 1 through 3. Typical mixer circuits are shown in Figure 4. Package dimensions are provided in Figures 5 through 21.
Table 1. Frequency Table
| Frequency Band | Frequency (GHz) |
| S | 2 to 4 |
| C | 4 to 8 |
| X | 8.2 to 12.4 |
| Ku | 12.4 to 18.0 |
| K | 18.0 to 26.5 |
| Ka | 26.5 to 40.0 |
Page 2
Table 2. Absolute Maximum Ratings (Note 1)
| Parameter | Symbol | Minimum | Typical | Maximum | Units |
|---|---|---|---|---|---|
| Maximum current | Imax | 100 | mA | ||
| Power dissipation (continuous wave) | Pd | 75 | mW/junction | ||
| Storage temperature | TSTG | –65 | +175 | C | |
| Operating temperature | TA | –65 | +175 | C | |
| Electrostatic discharge: Human Body Model (HBM), Class 0 | ESD | < 250 | V |
Note 1: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
CAUTION: Although these devices are designed to be as robust as possible, electrostatic discharge (ESD) can damage them. These devices must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the
human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all
times.
Page 3
Table 3. Electrical Specifications: Beam-Lead Single N-Type Low, Medium, High Drive Schottky Diodes
| Frequency Band | Part Number | Barrier | VF @ 1.0 mA (mV) | Rs @ 5.0 mA (Ω) | Total Capacitance (CT) @ 0 V (pF) | VB @ 10 uA (V) | |
|---|---|---|---|---|---|---|---|
| Minimum | Maximum | Maximum | Maximum | Minimum | |||
| S, C | DMF2820-220 | Low | 200 | 260 | 5 | 0.60 | 2 |
| S, C | DMF2820-250 | Low | 200 | 260 | 5 | 0.60 | 2 |
| S, C | DME2127-220 | Medium | 300 | 400 | 5 | 0.60 | 3 |
| S, C | DME2127-250 | Medium | 300 | 400 | 5 | 0.60 | 3 |
| S, C | DMJ2823-220 | High | 500 | 600 | 5 | 0.60 | 4 |
| S, C | DMJ2823-250 | High | 500 | 600 | 5 | 0.60 | 4 |
| X | DMF2821-220 | Low | 220 | 300 | 8 | 0.40 | 2 |
| X | DMF2821-250 | Low | 220 | 300 | 8 | 0.40 | 2 |
| X | DME2957-220 | Medium | 325 | 425 | 8 | 0.40 | 3 |
| X | DME2957-250 | Medium | 325 | 425 | 8 | 0.40 | 3 |
| X | DMJ2777-220 | High | 550 | 650 | 8 | 0.40 | 4 |
| X | DMJ2777-250 | High | 550 | 650 | 8 | 0.40 | 4 |
| Ku | DMF2344-220 | Low | 260 | 330 | 13 | 0.25 | 2 |
| Ku | DMF2344-230 | Low | 260 | 330 | 13 | 0.25 | 2 |
| Ku | DMF2344-250 | Low | 260 | 330 | 13 | 0.25 | 2 |
| Ku | DME2333-220 | Medium | 350 | 450 | 13 | 0.25 | 3 |
| Ku | DME2333-230 | Medium | 350 | 450 | 13 | 0.25 | 3 |
| Ku | DME2333-250 | Medium | 350 | 450 | 13 | 0.25 | 3 |
| Ku | DMJ2824-220 | High | 500 | 680 | 13 | 0.25 | 4 |
| Ku | DMJ2824-230 | High | 500 | 680 | 13 | 0.25 | 4 |
| Ku | DMJ2824-250 | High | 500 | 680 | 13 | 0.25 | 4 |
| K, Ka | DMF2822-220 | Low | 270 | 350 | 18 | 0.25 | 2 |
| K, Ka | DMF2822-230 | Low | 270 | 350 | 18 | 0.25 | 2 |
| K, Ka | DME2458-220 | Medium | 375 | 550 | 18 | 0.2 | 3 |
| K, Ka | DME2458-230 | Medium | 375 | 550 | 18 | 0.2 | 3 |
| K, Ka | DMJ2825-220 | High | 600 | 700 | 18 | 0.2 | 4 |
| K, Ka | DMJ2825-230 | High | 600 | 700 | 18 | 0.2 | 4 |
Page 4
Table 4. Electrical Specifications: Beam-Lead Series Pair, N-Type Low, Medium, High Drive Schottky Diodes
| Frequency Band | Part Number | Barrier | VF @ 1.0 mA (mV) | Rs @ 5.0 mA (Ω) | Total Capacitance (CT) @ 0 V (pF) | VB @ 10 uA (V) | ||
| Minimum | Maximum | Maximum | Maximum | Minimum | ||||
| S, C | DMF2835-222 | Low | 200 | 260 | 5 | 0.60 | 2 | |
| S, C | DMF2835-252 | Low | 200 | 260 | 5 | 0.60 | 2 | |
| S, C | DME2050-222 | Medium | 300 | 400 | 5 | 0.60 | 3 | |
| S, C | DME2050-252 | Medium | 300 | 400 | 5 | 0.60 | 3 | |
| S, C | DMJ2092-222 | High | 500 | 600 | 5 | 0.60 | 4 | |
| S, C | DMJ2092-252 | High | 500 | 600 | 5 | 0.60 | 4 | |
| X | DMF2826-222 | Low | 220 | 300 | 8 | 0.40 | 2 | |
| X | DMF2826-252 | Low | 220 | 300 | 8 | 0.40 | 2 | |
| X | DME2829-222 | Medium | 325 | 425 | 8 | 0.40 | 3 | |
| X | DME2829-252 | Medium | 325 | 425 | 8 | 0.40 | 3 | |
| X | DMJ2093-222 | High | 550 | 650 | 8 | 0.40 | 4 | |
| X | DMJ2093-252 | High | 550 | 650 | 8 | 0.40 | 4 | |
| Ku | DMF2827-222 | Low | 260 | 330 | 13 | 0.25 | 2 | |
| Ku | DMF2827-232 | Low | 260 | 330 | 13 | 0.25 | 2 | |
| Ku | DMF2827-252 | Low | 260 | 330 | 13 | 0.25 | 2 | |
| Ku | DME2830-222 | Medium | 350 | 450 | 13 | 0.25 | 3 | |
| Ku | DME2830-232 | Medium | 350 | 450 | 13 | 0.25 | 3 | |
| Ku | DME2830-252 | Medium | 350 | 450 | 13 | 0.25 | 3 | |
| Ku | DMJ2832-222 | High | 500 | 680 | 13 | 0.25 | 4 | |
| Ku | DMJ2832-232 | High | 500 | 680 | 13 | 0.25 | 4 | |
| Ku | DMJ2832-252 | High | 500 | 680 | 13 | 0.25 | 4 | |
| K, Ka | DMF2828-222 | Low | 270 | 350 | 18 | 0.2 | 2 | |
| K, Ka | DMF2828-232 | Low | 270 | 350 | 18 | 0.2 | 2 | |
| K, Ka | DME2831-222 | Medium | 375 | 550 | 18 | 0.2 | 3 | |
| K, Ka | DME2831-232 | Medium | 375 | 550 | 18 | 0.2 | 3 | |
| K, Ka | DMJ2833-222 | High | 600 | 700 | 18 | 0.2 | 4 | |
| K, Ka | DMJ2833-232 | High | 600 | 700 | 18 | 0.2 | 4 | |
Page 5
Table 5. Electrical Specifications: Beam-Lead Common Cathode, N-Type Low, Medium, High Drive Schottky Diodes
| Frequency Band | Part Number | Barrier | VF @ 1.0 mA (mV) | Rs @ 5.0 mA (Ω) | Total Capacitance (CT) @ 0 V (pF) | VB @ 10 uA (V) | |
|---|---|---|---|---|---|---|---|
| Minimum | Maximum | Maximum | Maximum | Minimum | |||
| S, C | DMF2182-223 | Low | 200 | 260 | 5 | 0.60 | 2 |
| S, C | DMF2182-253 | Low | 200 | 260 | 5 | 0.60 | 2 |
| S, C | DME2205-223 | Medium | 300 | 400 | 5 | 0.60 | 3 |
| S, C | DME2205-253 | Medium | 300 | 400 | 5 | 0.60 | 3 |
| S, C | DMJ2208-223 | High | 500 | 600 | 5 | 0.60 | 4 |
| S, C | DMJ2208-253 | High | 500 | 600 | 5 | 0.60 | 4 |
| X | DMF2183-223 | Low | 220 | 300 | 8 | 0.40 | 2 |
| X | DMF2183-253 | Low | 220 | 300 | 8 | 0.40 | 2 |
| X | DME2206-223 | Medium | 325 | 425 | 8 | 0.40 | 3 |
| X | DME2206-253 | Medium | 325 | 425 | 8 | 0.40 | 3 |
| X | DMJ2209-223 | High | 550 | 650 | 8 | 0.40 | 4 |
| X | DMJ2209-253 | High | 550 | 650 | 8 | 0.40 | 4 |
| Ku | DMF2184-223 | Low | 260 | 330 | 13 | 0.25 | 2 |
| Ku | DMF2184-253 | Low | 260 | 330 | 13 | 0.25 | 2 |
| Ku | DME2207-223 | Medium | 350 | 450 | 13 | 0.25 | 3 |
| Ku | DME2207-253 | Medium | 350 | 450 | 13 | 0.25 | 3 |
| Ku | DMJ2210-223 | High | 500 | 680 | 13 | 0.25 | 4 |
| Ku | DMJ2210-253 | High | 500 | 680 | 13 | 0.25 | 4 |
| K, Ka | DMF2834-223 | Low | 270 | 350 | 18 | 0.2 | 2 |
| K, Ka | DME2864-223 | Medium | 375 | 550 | 18 | 0.2 | 3 |
| K, Ka | DMJ2836-223 | High | 600 | 700 | 18 | 0.2 | 4 |
Page 6
Table 6. Electrical Specifications: Beam-Lead Anti-Parallel, N-Type Low, Medium, High Drive Schottky Diodes
| Frequency Band | Part Number | Barrier | VF @ 1.0 mA (mV) | Rs @ 5.0 mA (Ω) | Total Capacitance (CT) @ 0 V (pF) | VB @ 10 uA (V) | |
| Minimum | Maximum | Maximum | Maximum | Minimum | |||
| S, C | DMF2185-221 | Low | 200 | 260 | 5 | 0.60 | 2 |
| S, C | DMF2185-251 | Low | 200 | 260 | 5 | 0.60 | 2 |
| S, C | DME2282-221 | Medium | 300 | 400 | 5 | 0.60 | 3 |
| S, C | DME2282-251 | Medium | 300 | 400 | 5 | 0.60 | 3 |
| S, C | DMJ2303-221 | High | 500 | 600 | 5 | 0.60 | 4 |
| S, C | DMJ2303-251 | High | 500 | 600 | 5 | 0.60 | 4 |
| X | DMF2186-221 | Low | 220 | 300 | 8 | 0.40 | 2 |
| X | DMF2186-251 | Low | 220 | 300 | 8 | 0.40 | 2 |
| X | DME2283-221 | Medium | 325 | 425 | 8 | 0.40 | 3 |
| X | DME2283-251 | Medium | 325 | 425 | 8 | 0.40 | 3 |
| X | DMJ2304-221 | High | 550 | 650 | 8 | 0.40 | 4 |
| X | DMJ2304-251 | High | 550 | 650 | 8 | 0.40 | 4 |
| Ku | DMF2187-221 | Low | 260 | 330 | 13 | 0.25 | 2 |
| Ku | DMF2187-251 | Low | 260 | 330 | 13 | 0.25 | 2 |
| Ku | DME2284-221 | Medium | 350 | 450 | 13 | 0.25 | 3 |
| Ku | DME2284-251 | Medium | 350 | 450 | 13 | 0.25 | 3 |
| Ku | DMJ2246-221 | High | 500 | 680 | 13 | 0.25 | 4 |
| Ku | DMJ2246-251 | High | 500 | 680 | 13 | 0.25 | 4 |
| K, Ka | DMF2837-221 | Low | 270 | 350 | 18 | 0.2 | 2 |
| K, Ka | DME2838-221 | Medium | 375 | 550 | 18 | 0.2 | 3 |
| K, Ka | DMJ2839-221 | High | 600 | 700 | 18 | 0.2 | 4 |
Page 7
Table 7. Electrical Specifications: Beam-Lead Ring Quad, N-Type Low, Medium, High Drive Schottky Diodes
| Frequency Band | Part Number | Barrier | VF @ 1.0 mA (mV) | Rs @ 5.0 mA (Ω) | Total Capacitance (CT) @ 0 V (pF) | VB @ 10 uA (V) | |
| Minimum | Maximum | Maximum | Maximum | Minimum | |||
| S, C | DMF2865-224 | Low | 200 | 260 | 5 | 0.60 | 2 |
| S, C | DMF2865-254 | Low | 200 | 260 | 5 | 0.60 | 2 |
| S, C | DME2857-224 | Medium | 300 | 400 | 5 | 0.60 | 3 |
| S, C | DME2857-254 | Medium | 300 | 400 | 5 | 0.60 | 3 |
| S, C | DMJ2502-224 | High | 500 | 600 | 5 | 0.60 | 4 |
| S, C | DMJ2502-254 | High | 500 | 600 | 5 | 0.60 | 4 |
| X | DMF2011-224 | Low | 220 | 300 | 8 | 0.40 | 2 |
| X | DMF2011-254 | Low | 220 | 300 | 8 | 0.40 | 2 |
| X | DME2858-224 | Medium | 325 | 425 | 8 | 0.40 | 3 |
| X | DME2858-254 | Medium | 325 | 425 | 8 | 0.40 | 3 |
| X | DMJ2990-224 | High | 550 | 650 | 8 | 0.40 | 4 |
| X | DMJ2990-254 | High | 550 | 650 | 8 | 0.40 | 4 |
| Ku | DMF2012-224 | Low | 260 | 330 | 13 | 0.25 | 2 |
| Ku | DMF2012-234 | Low | 260 | 330 | 13 | 0.25 | 2 |
| Ku | DMF2012-254 | Low | 260 | 330 | 13 | 0.25 | 2 |
| Ku | DME2859-224 | Medium | 350 | 450 | 13 | 0.25 | 3 |
| Ku | DME2859-234 | Medium | 350 | 450 | 13 | 0.25 | 3 |
| Ku | DME2859-254 | Medium | 350 | 450 | 13 | 0.25 | 3 |
| Ku | DMJ2667-224 | High | 500 | 680 | 13 | 0.25 | 4 |
| Ku | DMJ2667-234 | High | 500 | 680 | 13 | 0.25 | 4 |
| Ku | DMJ2667-254 | High | 500 | 680 | 13 | 0.25 | 4 |
| K, Ka | DMF2454-224 | Low | 270 | 350 | 18 | 0.25 | 2 |
| K, Ka | DMF2454-234 | Low | 270 | 350 | 18 | 0.25 | 2 |
| K, Ka | DME2459-224 | Medium | 375 | 550 | 18 | 0.2 | 3 |
| K, Ka | DME2459-234 | Medium | 375 | 550 | 18 | 0.2 | 3 |
| K, Ka | DMJ2455-224 | High | 600 | 700 | 18 | 0.2 | 4 |
| K, Ka | DMJ2455-234 | High | 600 | 700 | 18 | 0.2 | 4 |
Page 8
Table 8. Electrical Specifications: Beam-Lead Bridge Quad, N-Type Low, Medium, High Drive Schottky Diodes
| Frequency Band | Part Number | Barrier | VF @ 1.0 mA (mV) | Rs @ 5.0 mA (Ω) | Total Capacitance (CT) @ 0 V (pF) | VB @ 10 uA (V) | |
| Minimum | Maximum | Maximum | Maximum | Minimum | |||
| S, C | DMF2076-225 | Low | 200 | 260 | 5 | 0.60 | 2 |
| S, C | DMF2076-255 | Low | 200 | 260 | 5 | 0.60 | 2 |
| S, C | DME2029-225 | Medium | 300 | 400 | 5 | 0.60 | 3 |
| S, C | DME2029-255 | Medium | 300 | 400 | 5 | 0.60 | 3 |
| S, C | DMJ2312-225 | High | 500 | 600 | 5 | 0.60 | 4 |
| S, C | DMJ2312-255 | High | 500 | 600 | 5 | 0.60 | 4 |
| X | DMF2077-225 | Low | 220 | 300 | 8 | 0.40 | 2 |
| X | DMF2077-255 | Low | 220 | 300 | 8 | 0.40 | 2 |
| X | DME2850-225 | Medium | 325 | 425 | 8 | 0.40 | 3 |
| X | DME2850-255 | Medium | 325 | 425 | 8 | 0.40 | 3 |
| X | DMJ2088-225 | High | 550 | 650 | 8 | 0.40 | 4 |
| X | DMJ2088-255 | High | 550 | 650 | 8 | 0.40 | 4 |
| Ku | DMF2078-225 | Low | 260 | 330 | 13 | 0.25 | 2 |
| Ku | DMF2078-235 | Low | 260 | 330 | 13 | 0.25 | 2 |
| Ku | DMF2078-255 | Low | 260 | 330 | 13 | 0.25 | 2 |
| Ku | DME2031-225 | Medium | 350 | 450 | 13 | 0.25 | 3 |
| Ku | DME2031-235 | Medium | 350 | 450 | 13 | 0.25 | 3 |
| Ku | DME2031-255 | Medium | 350 | 450 | 13 | 0.25 | 3 |
| Ku | DMJ2768-225 | High | 500 | 680 | 13 | 0.25 | 4 |
| Ku | DMJ2768-235 | High | 500 | 680 | 13 | 0.25 | 4 |
| Ku | DMJ2768-255 | High | 500 | 680 | 13 | 0.25 | 4 |
| K, Ka | DMF2848-225 | Low | 270 | 350 | 18 | 0.25 | 2 |
| K, Ka | DMF2848-235 | Low | 270 | 350 | 18 | 0.25 | 2 |
| K, Ka | DME2851-225 | Medium | 375 | 550 | 18 | 0.2 | 3 |
| K, Ka | DME2851-235 | Medium | 375 | 550 | 18 | 0.2 | 3 |
| K, Ka | DMJ2852-225 | High | 600 | 700 | 18 | 0.2 | 4 |
| K, Ka | DMJ2852-235 | High | 600 | 700 | 18 | 0.2 | 4 |
Page 9
Table 9. Electrical Specifications: Epoxy Packaged Octo Quad Ring, N-Type Low, Medium, High Drive Schottky Diodes
| Frequency Band | Part Number | Barrier | VF @ 1.0 mA (mV) | Rs @ 5.0 mA (Ω) | Total Capacitance (CT) @ 0 V (pF) | VB @ 10 uA (V) | |
| Minimum | Maximum | Maximum | Maximum | Minimum | |||
| S to X | DMF3938-257 | Low | 400 | 520 | 16 | 0.40 | 4 |
| S to X | DME3939-257 | Medium | 600 | 800 | 16 | 0.40 | 6 |
| S to X | DMJ3940-257 | High | 1000 | 1200 | 16 | 0.40 | 8 |
Typical Performance Characteristics

10.0
0.05 0.02 0.01 0.005 0.002 0.001 0 120 240 360 480 600
Forward Voltage (mV)
Figure 1. Typical Forward DC Characteristic Curves
(Voltage vs Current)
NF

(dB) 12
11
10
9
8
7
6 0 0.05 0.1 0.2 0.5 1 2 5 10 Local Oscillator Driver (mW)
Figure 3. Typical X-Band Low Drive Mixer Diode RF Parameters vs
Local Oscillator Drive

0 0.480 0.960 1.440
1.920 2.400
Forward Voltage (mV)
Figure 2. Typical Forward DC Characteristic Curves
(Voltage vs current)
Page 10
Single Ended Mixer

SIG Input
LO Input
Balanced Mixer

SIG Input
LO Input
Double Balanced Mixer

SIG Input
LO Input
Figure 4. Typical Mixer Circuits
Page 11


Figure 5. -220 Package Dimensions


Figure 6. -221 Package Dimensions
Page 12
Schematic A B 1
3
0.185 (4.70 mm)
0.068 (1.73 mm)
0.145 (3.68 mm)
2

0.070 (1.78 mm) Sq.
0.005 (0.13 mm)
0.042 (1.07 mm)
0.003 (0.08 mm)
0.028 (0.71 mm)
3 Plcs.
Figure 7. -222 Package Dimensions
Schematic A B 1 3
0.185 (4.70 mm)
0.068 (1.73 mm)
2
0.145 (3.68 mm)

0.070 (1.78 mm) Sq.
0.005 (0.13 mm)
0.042 (1.07 mm)
0.003 (0.08 mm)
0.028 (0.71 mm)
3 Plcs.
Figure 8. -223 Package Dimensions
Page 13
Schematic 1

(1.78mm)
0.042 (1.07 mm) 0.028 (0.71 mm)
0.005 (0.13 mm) Ceramic
Metal
0.003 (0.08 mm) 4 Plcs.
Figure 9. -224 Package Dimensions
Schematic
0.022 (0.56 mm)
1
0.018 (0.46 mm) 4 Plcs.

Sq.
0.042 (1.07 mm) 0.028 (0.71 mm)
4
0.005 (0.13 mm) 0.003 (0.08 mm) 4 Plcs.
Figure 10. -225 Package Dimensions
Page 14
Schematic
1
2

0.090 (2.29 mm) Min. 2 Plcs.
0.013 (0.33 mm) 0.017 (0.43 mm) 2 Plcs.

0.003 (0.08 mm) 0.005 (0.13 mm)
0.012 (0.30 mm)
0.055 (1.40 mm)
Figure 11. -230 Package Dimensions
Schematic
2
3
0.051 (1.30 mm) 0.055 (1.40 mm)

(0.76 mm)

0.012 (0.30 mm)
Figure 12. -232 Package Dimensions
Page 15
Schematic 1

4
(0.76 mm) Max.
0.003 (0.08 mm)

0.055 (1.40 mm)
Figure 13. -234 Package Dimensions
0.008 (0.30 mm)
Schematic
Max.

1
4
3

0.003 (0.08 mm) 0.005 (0.13 mm) 4 Plcs.
0.055 (1.40 mm)
Figure 14. -235 Package Dimensions
Page 16
Schematic
1
2
0.100 (2.54 mm) Dia.

Epoxy Encapsulation Au-Plated Leads 0.003 (0.08 mm) 0.005 (0.13 mm)
0.018 (0.45 mm) 0.122 (0.55 mm) 2 Plcs.
0.018 (0.45 mm) 0.122 (0.55 mm)
0.050 (1.27 mm) Max.
Figure 15. -250 Package Dimensions
Schematic
0.100 0.090 (2.28 mm) (2.54 mm) 0.110 (2.79 mm) Dia.
1 50" 0' 40" 0'
Au-Plated Leads
0.003 (0.08 mm) 0.005 (0.13 mm)
Ceramic Base
2
1 2 Plcs.
0.018 (0.45 mm) 2 0.022 (0.55 mm) 2 Plcs.
Epoxy Encapsulation
0.050 (1.27 mm) Max.
0.018 (0.45 mm) 0.022 (0.55 mm)
Figure 16. -251 Package Dimensions
Page 17
Schematic 3
2
Colored Dot

1
0.018 (0.45 mm) 0.022 (0.55 mm) 3 Plcs.

0.003 (0.08 mm)
(1.27 mm)
0.005 (0.13 mm)
0.021 (0.53 mm)
Figure 17. -252 Package Dimensions
Schematic 3
2

Epoxy Encapsulation Au-Plated Leads
0.003 (0.08 mm)
Ceramic Base
0.005 (0.13 mm) 3 Plcs.
1
0.040 (1.02 mm) Max.
0.019 (0.48 mm) 0.021 (0.33 mm)
Figure 18. -253 Package Dimensions
Page 18
Schematic 4
0.100 (2.54 mm)

0.012 (0.30 mm) Max.
Epoxy Encapsulation
0.018 (0.36 mm) 0.022 (0.56 mm) 2 Plcs.
Ceramic Base
3
2
0.019 (0.46 mm) 0.022 (0.56 mm) 4 Plcs.
0.003 (0.08 mm)
Au-Plated Leads
0.005 (0.13 mm)
0.050 (1.27 mm) Max.
Figure 19. -254 Package Dimensions
Schematic 1
1

Epoxy Encapsulation Au-Plated Leads 0.003 (0.08 mm) 0.005 (0.13 mm)
Ceramic Base
0.050 (1.27 mm)
0.018 (0.46 mm) 0.022 (0.56 mm)
Figure 20. -255 Package Dimensions
Page 19
Schematic
0.012 (0.030 mm)
1
Max.

Epoxy Encapsulation Au-Plated Leads
0.003 (0.08 mm) 0.005 (0.13 mm)
Ceramic Base
4
3
0.050 (0.76 mm) Max.
0.018 (0.46 mm) 0.022 (0.56 mm)
Figure 21. -257 Package Dimensions
Page 20
Copyright © 2014, 2017 Isolink, Inc. All Rights Reserved.
Information in this document is provided in connection with Isolink, Inc. (“Isolink”), a wholly-owned subsidiary of Skyworks Solutions, Inc. These materials, including the information contained herein, are provided by Isolink as a service to its customers and may be used for informational purposes only by the customer. Isolink assumes no responsibility for errors or omissions in these materials or the information contained herein. Isolink may change its documentation, products, services, specifications or product descriptions at any time, without notice. Isolink makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Isolink assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Isolink products, information or materials, except as may be provided in Isolink Terms and Conditions of Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. ISOLINK DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. ISOLINK SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST
REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Customers are responsible for their products and applications using Isolink products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Isolink assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Isolink products outside of stated published specifications or parameters.
Isolink is a trademark of Isolink Inc. in the United States and other countries. Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners.