DMA80I1600HA ISC
Document overview
- PDF pages: 3
Technical content
Page 1
Standard Rectifier Diode
DMA80I1600HA
FEATURES

- Planar passivated chips
- Very low leakage current
- High surge capability
APPLICATIONS
- Diode for main rectification
- For single and three phase
bridge configurations
ABSOLUTE MAXIMUM RATINGS(Ta=25℃)
| SYMBOL | PARAMETER | VALUE | UNIT | |
|---|---|---|---|---|
| V RRM | max. repetitive reverse blocking voltage | 1600 | V | |
| V RSM | max. non-repetitive reverse blocking voltage | 1700 | V | |
| I F(AV) | average forward current (T =125 ℃, 180°sine),TV =175℃ C J | 80 | A | |
| P tot | total power dissipation | 430 | W | |
| I RMS | RMS current | 70 | A | |
| I2t | value for fusing | 10ms,50Hz,sine,T =45℃ VJ | 8.45 | kA2S |
| 10ms,50Hz,sine,T =150℃ VJ | 6.11 | kA2S | ||
| I FSM | max. forward surge current | 10ms,50Hz,sine,T =45℃ VJ | 1.30 | kA |
| 10ms,50Hz,sine,T =150℃ VJ | 1.11 | kA | ||
| T VJ | virtual junction temperature | -55~175 | ℃ | |
| T stg | storage temperature | -55~150 | ℃ | |
Page 2
Standard Rectifier Diode
DMA80I1600HA
THERMAL CHARACTERISTICS
| SYMBOL | PARAMETER | MAX | UNIT |
|---|---|---|---|
| R th j-c | Thermal Resistance,Junction to Case | 0.35 | ℃/W |
ELECTRICAL CHARACTERISTICS(TJ = 25°C unless otherwise specified)
| SYMBOL | PARAMETER | CONDITIONS | MIN | TYP | MAX | UNIT |
|---|---|---|---|---|---|---|
| V FM | Maximum forward voltage drop | I = 80A F | -- | -- | 1.17 | V |
| I = 160A F | -- | -- | 1.22 | V | ||
| I R | Peak Reverse Current | Rate DC Voltage | -- | -- | 40 | uA |
PACKAGE OUTLINE Dimensions in mm



PRODUCT DISCLAIMER
ISC reserves the rights to make changes of the content herein the datasheet at any time without notification. The information contained herein is presented only as a guide for the applications of our products. ISC products are intended for usage in general electronic equipment. The products are not designed for
Page 3
Standard Rectifier Diode
DMA80I1600HA
use in equipment which require specialized quality and/or reliability, or in equipment which could have applications in hazardous environments, aerospace industry, or medical field. Please contact us if you intend our products to be used in these special applications. ISC makes no warranty or guarantee regarding the suitability of its products for any particular purpose, nor does ISC assume any liability arising from the application or use of any products, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. It is strictly prohibited to reprint or copy part or all of this datasheet without permission from ISC.