DMA80I1600HA ISC

Document overview

  • PDF pages: 3

Technical content

Page 1

Standard Rectifier Diode

DMA80I1600HA

FEATURES

PDF page 1 diagram
  • Planar passivated chips
  • Very low leakage current
  • High surge capability

APPLICATIONS

  • Diode for main rectification
  • For single and three phase

bridge configurations

ABSOLUTE MAXIMUM RATINGS(Ta=25℃)

SYMBOL PARAMETER VALUE UNIT
V RRM max. repetitive reverse blocking voltage 1600 V
V RSM max. non-repetitive reverse blocking voltage 1700 V
I F(AV) average forward current (T =125 ℃, 180°sine),TV =175℃ C J 80 A
P tot total power dissipation 430 W
I RMS RMS current 70 A
I2t value for fusing 10ms,50Hz,sine,T =45℃ VJ 8.45 kA2S
10ms,50Hz,sine,T =150℃ VJ 6.11 kA2S
I FSM max. forward surge current 10ms,50Hz,sine,T =45℃ VJ 1.30 kA
10ms,50Hz,sine,T =150℃ VJ 1.11 kA
T VJ virtual junction temperature -55~175 ℃
T stg storage temperature -55~150 ℃

Page 2

Standard Rectifier Diode

DMA80I1600HA

THERMAL CHARACTERISTICS

SYMBOL PARAMETER MAX UNIT
R th j-c Thermal Resistance,Junction to Case 0.35 ℃/W

ELECTRICAL CHARACTERISTICS(TJ = 25°C unless otherwise specified)

SYMBOL PARAMETER CONDITIONS MIN TYP MAX UNIT
V FM Maximum forward voltage drop I = 80A F -- -- 1.17 V
I = 160A F -- -- 1.22 V
I R Peak Reverse Current Rate DC Voltage -- -- 40 uA

PACKAGE OUTLINE Dimensions in mm

PDF page 2 diagram
PDF page 2 diagram
PDF page 2 diagram

PRODUCT DISCLAIMER

ISC reserves the rights to make changes of the content herein the datasheet at any time without notification. The information contained herein is presented only as a guide for the applications of our products. ISC products are intended for usage in general electronic equipment. The products are not designed for

Page 3

Standard Rectifier Diode

DMA80I1600HA

use in equipment which require specialized quality and/or reliability, or in equipment which could have applications in hazardous environments, aerospace industry, or medical field. Please contact us if you intend our products to be used in these special applications. ISC makes no warranty or guarantee regarding the suitability of its products for any particular purpose, nor does ISC assume any liability arising from the application or use of any products, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. It is strictly prohibited to reprint or copy part or all of this datasheet without permission from ISC.