DGD21844M DIODES

Document overview

  • PDF pages: 12

Technical content

Page 1

Description

The DGD21844M is a high voltage / high speed gate driver capable of driving N-Channel MOSFETs and IGBTs in a half bridge configuration. High voltage processing techniques enable the DGD21844M’s highside to switch to 600V in a bootstrap operation.

The DGD21844M logic inputs are compatible with standard TTL and CMOS levels (down to 3.3V) for easy interfacing with controlling devices. The driver outputs feature high pulse current buffers designed for minimum driver cross conduction. Programmable deadtime, by an external resistor, provides more system level flexibility.

The DGD21844M is offered in SO-14 (Type TH) package, the operating temperature extends from -40°C to +125°C.

Applications

 DC-DC Converters  DC-AC Inverters  AC-DC Power Supplies  Motor Controls  Class D Power Amplifiers

PDF page 1 diagram

Typical Configuration

Ordering Information (Note 4)

HALF-BRIDGE GATE DRIVER IN SO-14 (Type TH)

Features

 Floating High-side Driver in Bootstrap Operation to 600V  Drives Two N-Channel MOSFETs or IGBTs in Half Bridge Configuration  1.4A Source / 1.8A Sink Output Current Capability  Outputs Tolerant to Negative Transients  Programmable Dead Time to Protect MOSFETs  Wide Low-side Gate Driver and Logic Supply: 10V to 20V  Wide Logic Supply Voltage Offset Voltage: -5V to 5V  Logic Input (IN and SD\*) 3.3V Capability  Schmitt Triggered Logic Inputs with Internal Pull Down  Undervoltage Lockout for High and Low Side Drivers  Extended Temperature Range: -40°C to +125°C  Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)  Halogen and Antimony free. “Green” Device (Note 3)

Mechanical Data

 Case: SO-14 (Type TH)  Case Material: Molded Plastic. “Green” Molding Compound. UL Flammability Classification Rating 94V-0  Moisture Sensitivity: Level 3 per J-STD-020  Terminals: Finish – Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208  Weight: 0.142 grams (Approximate)

SO-14 (Type TH)

PDF page 1 diagram

Top View

Part Number Marking Reel Size (inches) Tape Width (mm) Quantity Per Reel
DGD21844MS14-13 DGD21844M 13 16 2,500

Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. 2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. For packaging details, go to our website at https://www.diodes.com/design/support/packaging/diodes-packaging/.

Marking Information

PDF page 1 diagram

= Manufacturer’s Marking DGD21844M = Product Type Marking Code YY = Year (ex: 18 = 2018) WW = Week (01 to 53)

1 of 12

Page 2

Pin Diagrams

PDF page 2 diagram

Top View SO-14 (Type TH)

Pin Descriptions

Pin Number Pin Name Function
1 IN Logic input for high-side and low-side gate driver outputs (HO and LO), in phase with HO (referenced to VSS)
2 SD* Logic input for shutdown (referenced to VSS), enabled low
3 VSS Logic ground
4 DT Programmable deadtime lead, referenced to VSS
5 COM Low-side return
6 LO Low-side gate drive output
7 VCC Low-side and logic fixed supply
8, 9, 10, 14 NC No Connection (No Internal Connection)
11 VS High-side floating supply return
12 HO High-side gate drive output
13 VB High-side floating supply

Functional Block Diagram

PDF page 2 diagram

2 of 12

Page 3

Absolute Maximum Ratings (@TA = +25°C, unless otherwise specified.)

PDF page 3 diagram

Thermal Characteristics (@TA = +25°C, unless otherwise specified.)

Characteristic Symbol Value Unit
Power Dissipation Linear Derating Factor (Note 5) PD 1.0 W
Thermal Resistance, Junction to Ambient (Note 5) RθJA 120 °C/W
Operating Temperature TJ +150 °C
Lead Temperature (Soldering, 10s) TL +300
Storage Temperature Range TSTG -55 to +150

Note: 5. When mounted on a standard JEDEC 2-layer FR-4 board.

Recommended Operating Conditions

Parameter Symbol Min Max Unit
High Side Floating Supply Absolute Voltage VB VS + 10 VS + 20 V
High Side Floating Supply Offset Voltage VS (Note 6) 600 V
High Side Floating Output Voltage VHO VS VB V
Logic and Low Side Fixed Supply Voltage VCC 10 20 V
Low Side Output Voltage VLO 0 VCC V
Logic Input Voltage (IN and SD*) VIN VSS 5 V
Programmable Dead Time Pin Voltage VDT VSS VCC V
Logic Ground VSS -5 5 V
Ambient Temperature T A -40 +125 °C

Note: 6. Logic operation for VS = -5V to +600V.

3 of 12

Page 4

DC Electrical Characteristics (VBIAS (VCC, VBS) = 15V, VSS = COM, @TA = +25°C, unless otherwise specified.) (Note 7)

Parameter Symbol Min Typ Max Unit Conditions
Logic “1” Input Voltage for HO & Logic “0” for LO VIH 2.5 — — V VCC = 10V to 20V
Logic “0” Input Voltage for HO & Logic “1” for LO VIL — — 0.8 V VCC = 10V to 20V
SD* Input Positive Going Threshold VSDTH+ 2.5 — — V VCC = 10V to 20V
SD* Input Negative Going Threshold VSDTH- — — 0.8 V VCC = 10V to 20V
High Level Output Voltage, VBIAS - VO VOH — — 1.4 V IO = 0mA
Low Level Output Voltage, VO VOL — — 0.2 V IO = 20mA
Offset Supply Leakage Current ILK — — 50 µA VB = VS = 600V
Quiescent VBS Supply Current IBSQ 20 60 150 µA VIN = 0V or 5V
Quiescent VCC Supply Current ICCQ 0.4 1.0 1.8 mA VIN = 0V or 5V
Logic “1” Input Bias Current IIN+ — 25 60 µA IN = 5V, SD* = 0V
Logic “0” Input Bias Current IIN- — — 1.0 µA IN = 0V, SD* = 5V
VBS Supply Under-voltage Positive Going Threshold VBSUV+ 8.0 8.9 9.8 V —
VBS Supply Under-voltage Negative Going Threshold VBSUV- 7.4 8.2 9.0 V —
VCC Supply Under-voltage Positive Going Threshold VCCUV+ 8.0 8.9 9.8 V —
VCC Supply Under-voltage Negative Going Threshold VCCUV- 7.4 8.2 9.0 V —
Output High Short Circuit Pulsed Current IO+ 1.4 1.9 — A VO = 0V, PW ≤ 10µs
Output Low Short Circuit Pulsed Current IO- 1.7 2.3 — A VO = 15V, PW ≤ 10µs
  1. The VIN and IIN parameters are referenced to VSS and are applicable to the two logic input pins: IN and SD\*. The VO and IO parameters are referenced to Note: COM and are applicable to the respective output pins: HO and LO.

AC Electrical Characteristics (VBIAS (VCC, VBS) = 15V, VSS = COM, CL = 1000pF, @TA = +25°C, unless otherwise specified.)

PDF page 4 diagram

4 of 12

Page 5

Timing Waveforms

PDF page 5 diagram
PDF page 5 diagram
PDF page 5 diagram
PDF page 5 diagram

5 of 12

Page 6

Typical Performance Characteristics (@TA = +25°C, unless otherwise specified.)

PDF page 6 diagram
PDF page 6 diagram
PDF page 6 diagram
PDF page 6 diagram
PDF page 6 diagram
PDF page 6 diagram

6 of 12

Page 7

Typical Performance Characteristics (Cont.)

PDF page 7 diagram
PDF page 7 diagram
PDF page 7 diagram
PDF page 7 diagram
PDF page 7 diagram
PDF page 7 diagram

7 of 12

Page 8

Typical Performance Characteristics (Cont.)

PDF page 8 diagram
PDF page 8 diagram
PDF page 8 diagram
PDF page 8 diagram
PDF page 8 diagram
PDF page 8 diagram

8 of 12

Page 9

Typical Performance Characteristics (Cont.)

PDF page 9 diagram
PDF page 9 diagram
PDF page 9 diagram
PDF page 9 diagram
PDF page 9 diagram
PDF page 9 diagram

9 of 12

Page 10

Typical Performance Characteristics (Cont.)

PDF page 10 diagram

10 of 12

Page 11

Package Outline Dimensions

Please see http://www.diodes.com/package-outlines.html for the latest version.

SO-14 (Type TH)

PDF page 11 diagram
SO-14 (Type TH)
Dim Min Max Typ
A 1.55 1.73 --
A1 0.10 0.25 --
b 0.35 0.51 --
c 0.190 0.248 --
D 8.56 8.74 8.61
E 5.84 6.20 6.00
E1 3.81 3.99 3.94
e -- -- 1.27
h -- -- 0.33
L 0.41 0.89 --
Ø 0 8 -- All Dimensions in mm
PDF page 11 diagram

A

A1

e

Suggested Pad Layout

Please see http://www.diodes.com/package-outlines.html for the latest version.

SO-14 (Type TH)

X

Y

Dimensions Value (in mm)
C 1.27
C1 5.20
X 0.60
Y 2.20

C1

C

For high voltage applications, the appropriate industry sector guidelines should be considered with regards to creepage and clearance distances between Note: device Terminals and PCB tracking.

11 of 12

Page 12

IMPORTANT NOTICE

DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).

Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated

website, harmless against all damages.

Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.

Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks.

This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated.

LIFE SUPPORT

Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:

A. Life support devices or systems are devices or systems which:

  1. are intended to implant into the body, or
  1. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user.

B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness.

Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.

Copyright © 2018, Diodes Incorporated

12 of 12