DG506A-MIL VISHAY

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
  • PDF pages: 8

Technical content

9 S220

D Decoders/Drivers A0 S1b S5b S1a NC D b NC Dual-In-Line S2a S7a S6a S8a S4b S7b EN D a S3b S8b S5a S2b GND S3a NC S4a S6b Top View 92 0 10 19 13 16 14 15 Decoders/Drivers DG506A_MIL DG507A_MIL DG506A_MIL/507A_MIL Vishay Siliconix Document Number: 70066 S-00405—Rev. D, 21-Feb-00 www.vishay.com FaxBack 408-970-5600 5-1 Single 16-Ch/Differential 8-Ch CMOS Analog Multiplexers (Obsolete for non-hermetic. Use DG406/407 as pin-for-pin replacements.) /C0078/C0073 /C0073/C0073/C0078 Low On-Resistance: 240 TTL and CMOS Logic Compatible Low Power: 30 mW Break-Before-Make Switching 44-V Power Supply Rating Transition Time: 600 ns Easily Interfaced Low Power Consumption Low System Crosstalk Wide Analog Signal Range Communication Systems ATE Data Acquisition Systems Audio Signal Routing and Multiplexing Medical Instrumentation /C0073/C0073/C0078 A channel in the on state conducts current equally well in both directions. In the off state each channel blocks voltages up to the power supply rails, normally 30 V peak-to-peak. An enable (EN) function allows for device selection when several multiplexers are used. All control inputs, address (A X) and enable (EN) are TTL or CMOS compatible over the full specified operating temperature range. The DG506A_MIL/507A_MIL are fabricated in the Vishay Siliconix PLUS-40 process, which includes improved ESD protection for ruggedness. An epitaxial layer prevents latch up. The DG506A_MIL/507A_MIL are available in hermetic packages. For plastic packages, use the DG406/407 as pin-for-pin replacements. For wideband/video multiplexing, the DG536 is recommended. /C0078/C0073/C0078 /C0075 /C0073 /C0078 /C0073/C0078 /C0078/C0073/C0073/C0078

DG506A_MIL/507A_MIL Vishay Siliconix www.vishay.com /C0083 FaxBack 408-970-5600 5-2 Document Number: 70066 S-00405—Rev. D, 21-Feb-00 /C0084/C0082/C0085/C0084/C0072 /C0084/C0065/C0066/C0076/C0069/C0083 /C0065/C0078/C0068 /C0079/C0082/C0068/C0069/C0082/C0073/C0078/C0071 /C0073/C0078/C0070/C0079/C0082/C0077/C0065/C0084/C0073/C0079/C0078 /C0084/C0082/C0085/C0084/C0072 /C0084/C0065/C0066/C0076/C0069 /C0266 /C0068/C0071/C0053/C0048/C0054/C0065/C0095/C0077/C0073/C0076 A 3 A 2 A 1 A 0 EN On Switch X X X X 0 None 0 0 0 0 1 1 0 0 0 1 1 2 0 0 1 0 1 3 0 0 1 1 1 4 0 1 0 0 1 5 0 1 0 1 1 6 0 1 1 0 1 7 0 1 1 1 1 8 1 0 0 0 1 9 1 0 0 1 1 10 1 0 1 0 1 11 1 0 1 1 1 12 1 1 0 0 1 13 1 1 0 1 1 14 1 1 1 0 1 15 1 1 1 1 1 16 /C0079/C0082/C0068/C0069/C0082/C0073/C0078/C0071 /C0073/C0078/C0070/C0079/C0082/C0077/C0065/C0084/C0073/C0079/C0078 /C0266 /C0068/C0071/C0053/C0048/C0054/C0065/C0095/C0077/C0073/C0076 Temp Range Package Part Number 55 125 C 28-Pin CerDIP DG506AAK –55 to 125/C0095C 28-Pin CerDIP DG506AAK/883 –55 to 125/C0095C 28-Pin Sidebraze JM38510/19001BXC LCC-28* DG506AAZ/883 *Block Diagram and Pin Configuration not shown. /C0084/C0082/C0085/C0084/C0072 /C0084/C0065/C0066/C0076/C0069 /C0266 /C0068/C0071/C0053/C0048/C0055/C0065/C0095/C0077/C0073/C0076 A 2 A 1 A 0 EN On Switch X X X 0 None 0 0 0 1 1 0 0 1 1 2 0 1 0 1 3 0 1 1 1 4 1 0 0 1 5 1 0 1 1 6 1 1 0 1 7 1 1 1 1 8 Logic “0” = VAL 0.8 V Logic “1” = VAH 2.4 V X = Don’t Care /C0079/C0082/C0068/C0069/C0082/C0073/C0078/C0071 /C0073/C0078/C0070/C0079/C0082/C0077/C0065/C0084/C0073/C0079/C0078 /C0266 /C0068/C0071/C0053/C0048/C0055/C0065/C0095/C0077/C0073/C0076 Temp Range Package Part Number 55 125 C 28-Pin CerDIP DG507AAK –55 to 125/C0095C 28-Pin CerDIP DG507AAK/883 –55 to 125/C0095C 28-Pin Sidebraze JM38510/19003BXC 28-Pin LCC DG507AAZ/883 /C0065/C0066/C0083/C0079/C0076/C0085/C0084/C0069 /C0077/C0065/C0088/C0073/C0077/C0085/C0077 /C0082/C0065/C0084/C0073/C0078/C0071/C0083 Voltage Referenced to V– 20 mA, whichever occurs first Peak Current, S or D Power Dissipation (Package)b Notes: a. Signals on SX, DX or INX exceeding V+ or V– will be clamped by internal diodes. Limit forward diode current to maximum current ratings. b. All leads soldered or welded to PC board. c. Derate 14 mW//C0095C above 75/C0095C.

DG506A_MIL/507A_MIL Vishay Siliconix Document Number: 70066 S-00405—Rev. D, 21-Feb-00 www.vishay.com /C0083 FaxBack 408-970-5600 5-3 /C0083/C0080/C0069/C0067/C0073/C0070/C0073/C0067/C0065/C0084/C0073/C0079/C0078/C0083/C0097 Test Conditions Unless Otherwise Specified A Suffix –55 to 125/C0095C Parameter Symbol VIN = 2.4 V, 0.8 Vf Temp b Mind Typc Max d Unit Analog Switch Analog Signal Rangee VANALOG Full –15 15 V Drain-Source On-Resistance rDS(on) VD = /C003410 V, IS = –200 /C0109A Room Full 240 400 500 /C0087 rDS(on) Matchingg /C0068rDS(on) –10 V < VS < 10 V Room 6 % Source Off Leakage Current IS(off) VS = /C003410 V, VD = /C003510 V VEN = 0 V Room Full –50 A Drain Off ID(off) VD = /C003510 V VS = /C003410 V DG506A_MIL Room Full –10 –300 300 A Drain Off Leakage Current ID(off) VS = /C003410 V VEN = 0 V DG507A_MIL Room Full –200 200 nA Drain On ID(on) VS =V D = /C003410 V DG506A_MIL Room Full –10 –300 300Drain On Leakage Current ID(on) VS = VD = /C003410 V DG507A_MIL Room Full –200 200 Digital Control Logic Input Current It V l t H i h IAH VA = 2.4 V Room Full –10 –30 gp Input Voltage High IAH VA = 15 V Room Full /C0109A Logic Input Current Input Voltage Low IAL VEN = 0 V, 2.4 V, VA = 0 V Room Full –10 –30 Dynamic Characteristics Transition Time tTRANS See Figure 2 Room 0.6 1.0 Break-Before-Make Time tOPEN See Figure 4 Room 0.2 /C0109s Enable Turn-On Time tON(EN) See Figure 3 Room 1 1.5 /C0109s Enable Turn-Off Time tOFF(EN) See Figure 3 Room 0.4 1.0 Charge Injection Q Room 6 pC Off Isolationh OIRR VEN = 0 V, RL = 1 k/C0087, CL = 15 pF VS = 7 VRMS , f = 500 kHz Room 68 dB Source Off Capacitance C S(off) VEN = 0 V, VS = 0 V, f = 140 kHz Room 6 F Drain Off Capacitance C D(off) VEN = 0 V VD =0V DG506A_MIL Room 45 pF D rain Off C apacitance C D(off) VD = 0 V f = 140 kHz DG507A_MIL Room 23 p Power Supplies Positive Supply Current I+ VEN = 0 V, VA = 0 V Room 1.3 2.4 mA Negative Supply Current I– VEN = 0 V, VA = 0 V Room –1.5 –0.7 mA Notes: a. Refer to PROCESS OPTION FLOWCHART. b. Room = 25 /C0095C, Full = as determined by the operating temperature suffix. c. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing. d. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet. e. Guaranteed by design, not subject to production test. f. V IN = input voltage to perform proper function. g. /C0068rDS(on) /C0043/C0466 rDS(on)MAX – rDS(on)MIN rDS(on)AVE /C0467 h. Off isolation/C004320 log VD VS ,V S /C0043input to off switch, VD /C0043output due to VS.

DG506A_MIL/507A_MIL Vishay Siliconix www.vishay.com /C0083 FaxBack 408-970-5600 5-4 Document Number: 70066 S-00405—Rev. D, 21-Feb-00 /C0089/C0073/C0067/C0065/C0076 /C0067/C0072/C0065/C0065/C0067/C0069/C0073/C0073/C0067 /C0040/C0050/C0053/C0095/C0067 /C0078/C0076/C0069 /C0078/C0069/C0068/C0041 rDS(on) vs. VD and Power Supply Input Switching Threshold vs. V+ and V– Supply Voltages Supply Current vs. Switching Frequency Crosstalk vs. Frequency Charge Injection vs. Analog Voltage r DS(on) vs. VD and Temperature rDS(on)– Drain-Source On-Resistance ( (V)TV Q (pC) rDS(on)– Drain-Source On-Resistance ((dB)TALKX VD – Drain Voltage (V) V+, V– Positive and Negative Supplies (V) VD – Drain Voltage (V)VS – Source Voltage (V) f – Frequency (Hz) f – Frequency (Hz) I+, I– (mA) 15–15 2.5 2.0 1.5 1.0 0.5 40016 –15–10 –5 0 5 10 350 300 250 200 150 100 –10 –5 0 5 10 15 125/C0095C 600 –20 –10 0 10 20 500 400 300 200 100 V+ = 15 V V– = –15 V V+ = 15 V V– = –15 V 100 k10 k 1 M –20 –40 –60 –80 –100 –120 1 k 1 M 10 M10 k 100 k CerDIP Plastic V+ = 15 V V– = –15 V ref. 0.0 dBm ”10 /C00345 V /C00347.5 V /C003410 V /C003415 V /C003420 V ”5 ”15 ”20 25/C0095C –55/C0095C

DG506A_MIL/507A_MIL Vishay Siliconix Document Number: 70066 S-00405—Rev. D, 21-Feb-00 www.vishay.com /C0083 FaxBack 408-970-5600 5-5 /C0089/C0073/C0067/C0065/C0076 /C0067/C0072/C0065/C0065/C0067/C0069/C0073/C0073/C0067 /C0040/C0050/C0053/C0095/C0067 /C0078/C0076/C0069 /C0078/C0069/C0068/C0041 Off Isolation vs. Frequency Switching Time vs. Temperature IS(off) vs. Analog Voltage I D(on), ID(off) vs. Analog Voltage Switching Time vs. Positive Supply Voltage Leakages vs. Temperature (pA)ID (pA)IS Leakage Current (ns)tTRANS , tOPEN (ns)tTRANS , tOPEN OIRR (dB) f – Frequency (Hz) Temperature ( /C0095C) V+ – Positive Supply (V) Temperature ( /C0095C) VS – Source Voltage (V) V D – Drain Voltage (V) –20 –40 –60 –80 –100 –120 1 k 1 M 10 M10 k 100 k CerDIP Plastic V+ = 15 V V– = –15 V ref. 0 dBm ID(off) ID(on) V+ = 15 V V– = –15 V TA = 25/C0095C –20 –40 –60 –80 –15 –10 –5 0 5 10 15 1000 –55 800 600 400 200 –35 –15 5 25 45 65 105 125 85 tRANS tOPEN 1100 10 12 14 16 18 20 22 1000 900 800 700 600 500 400 300 200 V+ = 15 V V– = –15 V VD = /C003414 V ID(on), ID(off) IS(off) 100 nA 10 nA 1 nA 100 pA 10 pA 1 pA 0.1 pA –55 –35 –15 5 25 45 65 85 105 125 tRANS tOPEN V+ = 15 V V– = –15 V900 700 500 300 –15 –15 –10 –5 0 5 10 15 –10 V+ = 15 V V– = –15 V VS = –VD TA = 25/C0095C IS(off)