DG3000

DG3000 VISHAY

Document overview

• Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
• PDF pages: 9

Technical content

NO (Source1) COM NC (Source2) Top View IN GND MICRO FOOT (6-Bump) XXX 3000 Device Marking: 3000 xxx = Date/Lot Traceability Code A1 Locator DG3000 Vishay Siliconix Document Number: 71742 S-21483—Rev. C, 26-Aug-02 www.vishay.com Low-Voltage Single SPDT MICRO FOOT/C0116Analog Switch

FEATURES

/C0068MICRO FOOT Chip Scale Package (1.07 x 1.57 mm) /C0068Low Voltage Operation (1.8 V to 5.5 V) /C0068Low On-Resistance - rDS(on): 1.4 /C0087 /C0068Fast Switching - tON : 24 ns, tOFF: 9 ns /C0068Low Power Consumption /C0068TTL/CMOS Compatible BENEFITS /C0068Reduced Power Consumption /C0068Simple Logic Interface /C0068High Accuracy /C0068Reduce Board Space

APPLICATIONS

/C0068Cellular Phones /C0068Communication Systems /C0068Portable Test Equipment /C0068Battery Operated Systems /C0068PCM Cards /C0068PDA

DESCRIPTION

The DG3000 is a single-pole/double-throw monolithic CMOS analog switch designed for high performance switching of analog signals. Combining low power, high speed (tON: 24 ns, tOFF: 9 ns), low on-resistance (r DS(on): 1.4 /C0087) and small physical size (MICRO FOOT, 6-bump), the DG3000 is ideal for portable and battery powered applications requiring high performance and efficient use of board space. The DG3000 is built on Vishay Siliconix’s low voltage JI2 process. An epitaxial layer prevents latchup. Break-before -make is guaranteed for DG3000. Each switch conducts equally well in both directions when on, and blocks up to the power supply level when off. FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION TRUTH TABLE Logic NC NO

0 ON OFF

1 OFF ON

ORDERING INFORMATION

Temp Range Package Part Number -40 to 85°C MICRO FOOT: 6-Bump (2 x 3, 0.5-mm Pitch) DG3000DB

www.vishay.com Document Number: 71742 S-21483— Rev. C, 26-Aug-02 ABSOLUTE MAXIMUM RATINGS Reference to GND (Pulsed at 1 ms, 10% duty cycle) Package Reflow Conditionsb Power Dissipation (Packages)c Notes: a Signals on NC, NO, or COM or IN exceeding V+ will be clamped by internal diodes. Limit forward diode current to maximum current ratings. b Refer to IPC/JEDEC (J-STD-020A). No hand/manual solder rework recommended c All bumps soldered to PC Board. d Derate 6.5 mW/ /C0095C above 25/C0095C SPECIFICATIONS (V+ = 2.0 V) Test Conditions Otherwise Unless Specified Limits -40 to 85/C0095C Parameter Symbol V+ = 2.0 V, /C003410%, VIN = 0.4 or 1.6 Ve Tempa Minb Typc Maxb Unit Analog Switch Analog Signal Ranged VNO, VNC, VCOM Full 0 V+ V On-Resistance rON V+ = 1.8 V, VCOM = 1.0 V, INO, INC = 10 mA Room Fulld 17 20 22.5 /C0087 rON Flatnessd rON Flatness V+ = 1.8 V, VCOM = 0 to V+, INO, INC = 10 mA Room 14 /C0087 INO(off), INC(off) V+ = 2.2 V Room Fulld -700 -1 1 700 pA nA Switch Off Leakage Currentf ICOM(off) V+ = 2.2 V VNO, VNC = 0.5 V/1.5 V, VCOM = 1.5 V/0.5 V Room Fulld -700 -1 1 700 pA nA Channel-On Leakage Current f ICOM(on) V+ = 2.2 V, VNO, VNC = VCOM = 0.5 V/1.5 V Room Fulld -700 -1 1 700 pA nA Digital Control Input High Voltage VINH Full 1.6 Input Low Voltage VINL Full 0.4 V Input Capacitanced Cin Full 5 pF Input Currentd IINL or IINH VIN = 0 or V+ Full -1 1 /C0109A Dynamic Characteristics Turn-On Time tON /C0087 Room Fulld 61 76 Turn-Off Time tOFF VNO or VNC = 1.5 V, RL = 300 /C0087, CL = 35 pF Figures 1 and 2 Room Fulld 17 33 ns Break-Before-Make Time td Room 1 45 Charge Injectiond QINJ CL = 1 nF, VGEN = 0 V, RGEN = 0 /C0087, Figure 3 Room 2 pC Off-Isolationd OIRR /C0087 Room -61 Crosstalkd XTALK RL = 50 /C0087, CL = 5 pF, f = 1 MHz Room -67 dB NO, NC Off Capacitanced CNO(off), CNC(off) VIN = 0 or V+, f = 1 MHz Room 31 pF Channel-On Capacitanced CON VIN = 0 or V+, f = 1 MHz Room 98 pF Power Supply Power Supply Range V+ 1.8 2.2 V Power Supply Currentd I+ 0.1 1.0 /C0109A Power Consumption PC VIN = 0 or V+ 2.2 /C0109W

Document Number: 71742 S-21483— Rev. C, 26-Aug-02 www.vishay.com SPECIFICATIONS (V+ = 3.0 V) Test Conditions Otherwise Unless Specified Limits -40 to 85/C0095C Parameter Symbol V+ = 3 V, /C003410%, VIN = 0.4 or 2.0 Ve Tempa Minb Typc Maxb Unit Analog Switch Analog Signal Ranged VNO, VNC, VCOM Full 0 V+ V On-Resistanced rON V+ = 2.7 V, VCOM = 1.5 V, INO, INC = 10 mA Room Full 3.3 3.4 4.1 4.2 /C0087 rON Flatnessd rON Flatness V+ = 2.7 V, VCOM = 0 to V+, INO, INC = 10 mA Room 1.3 /C0087 INO(off), INC(off) V+ = 3.3 V Room Full -800 -13 800 pA nA Switch Off Leakage Current f ICOM(off) V+ = 3.3 V VNO, VNC = 1 V/3 V, VCOM = 3 V/1 V Room Full -800 -13 800 pA nA Channel-On Leakage Current f ICOM(on) V+ = 3.3 V, VNO, VNC = VCOM = 1 V/3 V Room Full -800 -13 800 pA nA Digital Control Input High Voltage VINH Full 2 Input Low Voltage VINL Full 0.4 V Input Capacitanced Cin Full 5 pF Input Currentd IINL or IINH VIN = 0 or V+ Full -1 1 /C0109A Dynamic Characteristics Turn-On Timed tON /C0087 Room Full 34 49 Turn-Off Timed tOFF VNO or VNC = 2.0 V, RL = 300 /C0087, CL = 35 pF Figure 1 and 2 Room Full 12 30 ns Break-Before-Make Timed td Room 1 23 Charge Injectiond QINJ CL = 1 nF, VGEN = 0 V, RGEN = 0 /C0087, Figure 3 Room 4 pC Off-Isolationd OIRR /C0087 Room -61 Crosstalkd XTALK RL = 50 /C0087, CL = 5 pF, f = 1 MHz Room -67 dB NO, NC Off Capacitanced CNO(off), CNC(off) VIN = 0 or V+, f = 1 MHz Room 31 pF Channel-On Capacitanced CON VIN = 0 or V+, f = 1 MHz Room 47 pF Power Supply Power Supply Range V+ 2.7 3.3 V Power Supply Currentd I+ 0.1 1.0 /C0109A Power Consumption PC VIN = 0 or V+ 3.3 /C0109W

www.vishay.com Document Number: 71742 S-21483— Rev. C, 26-Aug-02 SPECIFICATIONS (V+ = 5.0 V) Test Conditions Otherwise Unless Specified Limits -40 to 85/C0095C Parameter Symbol V+ = 5 V, /C003410%, VIN = 0.8 or 2.4 Ve Tempa Minb Typc Maxb Unit Analog Switch Analog Signal Ranged VNO, VNC, VCOM Full 0 V+ V On-Resistance rON V+ = 4.5 V, VCOM = 3 V, INO, INC = 10 mA Room Full 1.4 1.6 2.3 2.8 /C0087 rON Flatnessd rON Flatness V+ = 4.5 V, VCOM = 0 to V+, INO, INC = 10 mA Room 0.5 /C0087 INO(off), INC(off) V+ = 5.5 V Room Full -1.2 -21 1.2 Switch Off Leakage Current ICOM(off) V+ = 5.5 V VNO, VNC = 1 V/4.5 V, VCOM = 4.5 V/1 V Room Full -1.2 -21 1.2 21 nA Channel-On Leakage Current ICOM(on) VNO, VNC = VCOM = 1 V/4.5 V Room Full -1.2 -21 1.2 Digital Control Input High Voltage VINH Full 2.4 Input Low Voltage VINL Full 0.8 V Input Capacitance Cin Full 5 pF Input Current IINL or IINH VIN = 0 or V+ Full -1 1 /C0109A Dynamic Characteristics Turn-On Timed tON /C0087 Room Full 24 36 Turn-Off Timed tOFF VNO or VNC = 3 V, RL = 300 /C0087, CL = 35 pF Figure 1 and 2 Room Full 9 22 ns Break-Before-Make Timed td Room 1 15 Charge Injectiond QINJ CL = 1 nF, VGEN = 0 V, RGEN = 0 /C0087, Figure 3 Room 38 pC Off-Isolationd OIRR /C0087 Room -61 Crosstalkd XTALK RL = 50 /C0087, CL = 5 pF, f = 1 MHz Room -67 dB Source-Off Capacitanced CNO(off), CNC(off) VIN = 0 or V+, f = 1 MHz Room 30 pF Channel-On Capacitanced CON VIN = 0 or V+, f = 1 MHz Room 96 pF Power Supply Power Supply Range V+ 4.5 5.5 V Power Supply Current I+ 0.1 1.0 /C0109A Power Consumption PC VIN = 0 or V+ 5.5 /C0109W Notes: a. Room = 25 °C, Full = as determined by the operating suffix. b. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data s heet. c. Typical values are for design aid only, not guaranteed nor subject to production testing. d. Guarantee by design, nor subjected to production test. e. V IN = input voltage to perform proper function. f. Guaranteed by 5-V leakage testing, not production tested.

Document Number: 71742 S-21483— Rev. C, 26-Aug-02 www.vishay.com TYPICAL CHARACTERISTICS (25/C0095C UNLESS NOTED) 10 m -60 -40 -20 0 20 40 60 80 100 Supply Current vs. Input Switching Frequency Input Switching Frequency (Hz)

10 K 1 M 10 M100 K1 K10010

0.01 Supply Current vs. Temperature Temperature (/C0095C) I+ - Supply Current (nA) - On-Resistance (rON /C0087) 012345 012345 rON vs. VCOM and Supply Voltage VCOM - Analog Voltage (V) V+ = 1.8 V V+ = 2 V V+ = 3 V V+ = 5 V rON vs. Analog Voltage and Temperature - On-Resistance (rON /C0087) VCOM - Analog Voltage (V) V+ = 2 V V+ = 5 V 85/C0095C -40 /C0095C 25/C0095C 85/C0095C -40 /C0095C 25/C0095C 0.1 V+ = 5 V VIN = 0 V I+ - Supply Current (A) 10 n 1 m 100 /C0109 10 /C0109 1 /C0109 100 n rON vs. Analog Voltage and Temperature - On-Resistance (rON /C0087) VCOM - Analog Voltage (V) V+ = 3 V 85/C0095C -40 /C0095C 25/C0095C

www.vishay.com Document Number: 71742 S-21483— Rev. C, 26-Aug-02 TYPICAL CHARACTERISTICS (25/C0095C UNLESS NOTED) -90 -20 Loss, OIRR, X Insertion Loss, Off-Isolation, Crosstalk vs. Frequency Frequency (Hz) -10 -60 -40 -20 0 20 40 60 80 100 tON V+ = 2 V Switching Time vs. Temperature and Supply Voltage Temperature (/C0095C)

10 M 1 G 100 M1 M100 K

tON,t OFF - Switching Time (ns)tON V+ = 3 V tON V+ = 5 V tOFF V+ = 2 V tOFF V+ = 3 V tOFF V+ = 5 V -30 -40 -50 -60 -70 -80 TALK (dB) V+ = 3 V RL = 50 /C0087 LOSS OIRR XTALK 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 0123456 V+ - Supply Voltage (V) V T - Switching Threshold (V) Switching Threshold vs. Supply Voltage -80 -60 -40 -20 012345 VCOM - Analog Voltage (v) Q - Charge Injection (pC) Charge Injection vs. Analog Voltage V+ = 2 V V+ = 3 V V+ = 5 V -60 -40 -20 0 20 40 60 80 100 1000 100 -1200 -1000 -800 -600 -400 -200 200 012345 Leakage Current vs. Temperature Leakage vs. Analog Voltage VCOM, VNO, VNC - Analog Voltage Leakage Current (pA) Temperature (/C0095C) 10000 V+ = 5.5 V INO(off)/INC(off) ICOM(on) ICOM(off) Leakage Current (pA) V+ = 5 V T = 25/C0095C INO(off)/INC(off) ICOM(on) ICOM(off)

Document Number: 71742 S-21483— Rev. C, 26-Aug-02 www.vishay.com PACKAGE OUTLINE MICRO FOOT: 6−BUMP (2 X 3, 0.5−mm PITCH) NOTES (Unless Otherwise Specified): 1. Bump is Eutectic 63/57 Sn/Pb. 2. Non-solder mask defined copper landing pad. 3. Laser Mark on silicon die back; no coating. Shown is not actual marking; sample only. Index-Bump A1 Note 3 Top Side (Die Back) XXX 3000 Recommended Land Pattern 0.5 0.5 6 /C0032 /C0079 0.150 /C0088 0.180 Note 2 Solder Mask /C0079 /C0088 0.280 Silicon Bump Note 1 b Diameter 32 1 A B e D e A A2 S S E MILLIMETERS* INCHES Dim Min Max Min Max A 0.615 0.715 0.0242 0.0281 A1 0.140 0.190 0.0055 0.0075 A2 0.475 0.525 0.0187 0.0207 b 0.180 0.250 0.0071 0.0098 D 1.555 1.585 0.0612 0.0624 E 1.055 1.085 0.0415 0.0427 e 0.5 BASIC 0.0197 BASIC S 0.278 0.293 0.0109 0.0115 * Use millimeters as the primary measurement.