DG200A VISHAY

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
  • PDF pages: 5

Technical content

V– NC Dual-In-Line Top View Metal Can NC Top View D 1 S1IN1 V+ (Substrate and Case) IN2 GND D 2 DG200A_MIL Vishay Siliconix Document Number: 70035 S-02314—Rev. E, 05-Oct-00 www.vishay.com 4-1 Monolithic Dual SPST CMOS Analog Switch /C0070/C0069/C0065/C0084/C0085/C0082/C0069/C0083 /C0066/C0069/C0078/C0069/C0070/C0073/C0084/C0083 /C0065/C0080/C0080/C0076/C0073/C0067/C0065/C0084/C0073/C0079/C0078/C0083 /C0068/C003415 V Input Signal Range /C006844-V Maximum Supply Ranges /C0068On-Resistance: 45 /C0087 /C0068TTL and CMOS Compatibility /C0068Wide Dynamic Range /C0068Simple Interfacing /C0068Reduced External Component Count /C0068Servo Control Switching /C0068Programmable Gain Amplifiers /C0068Audio Switching /C0068Programmable Filters /C0068/C0069/C0083/C0067/C0082/C0073/C0080/C0084/C0073/C0079/C0078 The DG200A_MIL is a dual, single-pole, single-throw analog switch designed to provide general purpose switching of analog signals. This device is ideally suited for designs requiring a wide analog voltage range coupled with low on-resistance. The DG200A_MIL is designed on Vishay Siliconix’ improved PLUS-40 CMOS process. An epitaxial layer prevents latchup. Each switch conducts equally well in both directions when on, and blocks up to 30 V peak-to-peak when off. In the on condition, this bi-directional switch introduces no offset voltage of its own. /C0070/C0085/C0078/C0067/C0084/C0073/C0079/C0078/C0065/C0076/C0032/C0066/C0076/C0079/C0067/C0075/C0032/C0068/C0073/C0065/C0071/C0082/C0065/C0077/C0032/C0065/C0078/C0068/C0032/C0080/C0073/C0078/C0032/C0067/C0079/C0078/C0070/C0073/C0071/C0085/C0082/C0065/C0084/C0073/C0079/C0078 /C0084/C0082/C0085/C0084/C0072/C0032/C0084/C0065/C0066/C0076/C0069 Logic Switch 0 ON

1 OFF

Logic “0” /C0118 0.8 VLogic “0” /C0118 0.8 V Logic “1” /C0119 2.4 V

DG200A_MIL Vishay Siliconix www.vishay.com 4-2 Document Number: 70035 S-02314— Rev. E, 05-Oct-00 /C0079/C0082/C0068/C0069/C0082/C0073/C0078/C0071/C0032/C0073/C0078/C0070/C0079/C0082/C0077/C0065/C0084/C0073/C0079/C0078 Temp Range Package Part Number DG200AAK 14-Pin CerDIP DG200AAK/883, JM38510/12301BCA, 5962-9562901QCA –55 to 125/C0095C DG200AAA 10-Pin Metal Can DG200AAA/883, JM38510/12301BIC 14-Pin Sidebraze JM38510/12301BCC /C0065/C0066/C0083/C0079/C0076/C0085/C0084/C0069/C0032/C0077/C0065/C0088/C0073/C0077/C0085/C0077/C0032/C0082/C0065/C0084/C0073/C0078/C0071/C0083 30 mA, whichever occurs first Current S or D Power Dissipation (Package)b Notes: a. Signals on SX, DX, or INX exceeding V+ or V– will be clamped by internal diodes. Limit forward diode current to maximum current ratings. b. All leads welded or soldered to PC Board. c. Derate 6 mW//C0095C above 75/C0095C d. Derate 11 mW//C0095C above 75/C0095C /C0083/C0067/C0072/C0069/C0077/C0065/C0084/C0073/C0067/C0032/C0068/C0073/C0065/C0071/C0082/C0065/C0077/C0032/C0040/C0084/C0089/C0080/C0073/C0067/C0065/C0076/C0032/C0067/C0072/C0065/C0078/C0078/C0069/C0076/C0041 FIGURE 1. INX GND S D

DG200A_MIL Vishay Siliconix Document Number: 70035 S-02314— Rev. E, 05-Oct-00 www.vishay.com 4-3 /C0083/C0080/C0069/C0067/C0073/C0070/C0073/C0067/C0065/C0084/C0073/C0079/C0078/C0083/C0097 Test Conditions Unless Otherwise Specified Limits –55 to 125/C0095C Parameter Symbol VIN = 2.4 V, 0.8 Vf Temp b Minc Typd Max c Unit Analog Switch Analog Signal Rangee VANALOG Full –15 15 V Drain-Source On-Resistance rDS(on) VD = /C003410 V, IS = –1 mA Room Full 45 70 100 /C0087 Source Off Leakage Current IS(off) VS = /C003414 V, VD = /C003514 V Room Full –100 /C00340.01 2 100 Drain Off Leakage Current ID(off) VD = /C003414 V, VS = /C003514 V Room Full –100 /C00340.01 2 100 nA Channel On Leakage Current f ID(on) VS = VD = /C003414 V Room Full –200 /C00340.1 2 200 Digital Control Input Current with VIN = 2.4 V Room Full –0.5 0.0009 Input Current with Input Voltage High IINH VIN = 15 V Room Full 0.005 0.5 1 /C0109A Input Current with Input Voltage Low IINL VIN = 0 V Room Full –0.5 –0.0015 Dynamic Characteristics Turn-On Time tON Room 440 1000 Turn-Off Time tOFF See Switching Time Test Circuit Room 340 425 ns Charge Injection Q C L = 1000 pF, Vg = 0 V R g = 0 /C0087 Room –10 pC Source-Off Capacitance C S(off) f = 140 kHz VS = 0 V Room 9 Drain-Off Capacitance C D(off) f = 140 kHz VIN = 5 V VD = 0 V Room 9 pF Channel-On Capacitance C D(on) + C S(On) VD = VS = 0 V, VIN = 0 V Room 25 pF Off Isolation OIRR /C0087 Room 75 Crosstalk (Channel-to-Channel) XTALK VIN = 5 V, RL = 75 /C0087 VS = 2 V, f = 1 MHz Room 90 dB Power Supplies Positive Supply Current I+ Both Channels On or Off Room 0.8 2 Negative Supply Current I– Both Channels On or Off VIN = 0 V and 2.4 V Room –1 –0.23 mA Notes: a. Refer to PROCESS OPTION FLOWCHART. b. Room = 25 /C0095C, Full = as determined by the operating temperature suffix. c. The algebraic convention whereby the most negative value is aminimum and the most positive a maximum, is used in this data sheet. d. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing. e. Guaranteed by design, not subject to production test. f. V IN = input voltage to perform proper function.

DG200A_MIL Vishay Siliconix www.vishay.com 4-4 Document Number: 70035 S-02314— Rev. E, 05-Oct-00 /C0084/C0089/C0080/C0073/C0067/C0065/C0076/C0032/C0067/C0072/C0065/C0082/C0065/C0067/C0084/C0069/C0082/C0073/C0083/C0084/C0073/C0067/C0083/C0032/C0040/C0050/C0053/C0095/C0067/C0032/C0085/C0078/C0076/C0069/C0083/C0083/C0032/C0078/C0079/C0084/C0069/C0068/C0041 Leakage Currents vs. Analog VoltagerDS(on) vs. VD and Power Supply Voltage rDS(on)()/C0087 (pA)I , ISD VD – Drain Voltage (V) V ANALOG – Analog Voltage (V) 120 –15 D C –15 E 01 5 100 01 5 –12 –18 –24 ID(off) or IS(off) ID(on) TA = 25/C0095CA: /C00345 V B: /C003410 V C: /C003412 V D: /C003415 V E: /C003420 V –12 –66 1 2 93–3–9 –12 –9 –6 –33 6 9 1 2 B A Supply Currents vs. Toggle FrequencyInput Switching Threshold vs. V+ and V– Supply Voltages V+, V– Positive and Negative Supplies (V) Toggle Frequency (Hz) (V)TV I+, I– (mA) ÉÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉÉ 2.5 2.0 1.5 1.0 0.5 /C00345 /C003410 /C003415 /C003420 V+ = 15 V V– = –15 V Both logic inputs toggled simutaneously 1 k 10 k 100 k 1 M