DFA08 SANYO

Document overview

  • PDF pages: 2

Technical content

Page 1

Ordering number:EN2790A

PDF page 1 diagram

Features

Package Dimensions

  • High-speed switching use.

unit:mm

  • Meets the requirements for automatic mounter and

1188

permits DFA08-applied sets to be made smaller.

PDF page 1 diagram
  • Peak reverse voltage:VRM=200 to 400V.
  • Average rectified current:IO=0.8A.

Specifications

Absolute Maximum Ratings at Ta = 25˚C

Parameter Symbol Conditions DFA08C DFA08E Unit
PeakReverseVoltage V RM 200 400 V
AverageRecitifiedCurrent IO 50Hzsinewave,mountedonaluminaboard → 0.8 A
Loadresistor,mountedonPCB → 0.62 A
SurgeForwardCurrent IFSM 50Hzsinewave,non-repetitive,1cyclepeakvalue → 25 A
JunctionTemperature Tj → 150 ˚C
StorageTemperature Tstg → –55to+150 ˚C

Electrical Characteristics at Ta = 25˚C

Parameter Symbol Conditions Ratings Unit
min typ max
ForwardVoltage VF IF=0.8A 1.2 V
ReverseCurrent IR VR=V RM 10 µA
ReverseRecoveryTime trr IF=0.1A,IR=0.3A 300 ns
ThermalResistance θ j–l Junction-Lead 23 ˚C/W
θ j–a Junction-AmbientMountedonaluminaboard 108 ˚C/W
Mounted on PCB 157 ˚C/W

Reverse Recovery Time Test Circuit

PDF page 1 diagram

SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters

TOKYO OFFICE, Tokyo Bldg., 1-10 , Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN

52098HA (KT)/92194MO 8-4314/5109TA, TS No.2790-1/2

Page 2

DFA08

PDF page 2 diagram

No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury, death or property loss. Anyone purchasing any products described or contained herein for an above-mentioned use shall: Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated with such use:

Not impose any responsibilty for any fault or negligence which may be cited in any such claim or litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees jointly or severally. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.

This catalog provides information as of May, 1998. Specifications and information herein are subject to change without notice.

PS No.2790-2/2