DF6-1P-3.96C HIROSE

Document overview

  • PDF pages: 4

Technical content

Page 1

PDF page 1 diagram
PDF page 1 diagram

IFeatures

1. Service Efficiency Up

Conventional thick cables are directly mounted on the board piece by piece, but connecterization has achieved

PDF page 1 diagram

soldering services in a batch. This product enhances soldering service efficiency.

2. Miniaturization

This product achieves miniaturization for thick cables.

Mounting height on board

: 7.5mm

Width

: 5.0mm

3. Board Prefixed Mechanism

Since the connector is softly press-fitted to the board for insertion, it can be prefixed to the board.

IApplications

Secondary power supply units for various equipment

B91

Page 2

IProduct Specifications

Rating Current rating (Note 1) AWG 18 : 5A Cable size AWG 20 : 4A AWG 22 : 3A Operating Temperature Range Operating Moisture Range -35 to +85ç (Note 1) 20 to 80%
Storage Temperature Range Storage Humidity Range -10 to +60ç (Note 2) 40 to 70% (Note 2)
Voltage rating 300V AC
Item Specification Condition
1.Insulation Resistance 1000M ohms min. 500V DC
2.Withstanding voltage No flashover or insulation breakdown. 1500V AC/1 minute
3.Contact Resistance 15m ohms max. 100mA
4.Vibration No damage, cracks, or parts looseness. Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
5.Humidity (Steady state) No damage, cracks, or parts looseness. 96 hours at temperature of 40ç and humidity of 90% to 95%
6.Temperature Cycle No damage, cracks, or parts looseness. (-55ç: 30 minutes ➝15 to 35ç: 10 minutes➝85ç: 30 minutes➝5 to 35ç: 10 minutes ) 5 cycles
7. Resistance to Soldering heat No deformation of components affecting performance. Flow: 250ç for 10 seconds
Manual soldering: 300ç for 3 seconds

Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.

IMaterial

Product Part Material Finish Remarks
Crimping Plug Insulator Polyamide White UL94V-0
Crimping Contact for Plug Brass Copper Alley Tin plated ________

Note: HRS's tin plating process takes measures against whisker.

IOrdering Information

GCrimping Plug

DF6 - \* P - 3.96 C

q w e

r t

q Series Name : DF 6 r Contact pitch: 3.96mm
w Number of contacts: 1~8, 10 t C: Crimping plug
e Connector type P: Plug

GCrimping Contact

DF6A - 1822 PCF

q

w e

q Applicable cable type None: UL 1007 A: UL 1015 e Packaging type PCF: Plug contact, reel packaging SC: Plug contact, bag packaging
w Applicable cable size 1822: AWG#18~#22

B92

Page 3

IPrecrimping Plug

PDF page 3 diagram
PDF page 3 diagram
Part Number CL No. Number of Contacts A B
DF6- 1P-3.96C 546-0001-1 1 4.92 _____
DF6- 2P-3.96C 546-0002-4 2 8.88 3.96
DF6- 3P-3.96C 546-0003-7 3 12.84 7.92
DF6- 4P-3.96C 546-0004-0 4 16.80 11.88
DF6- 5P-3.96C 546-0005-2 5 20.76 15.84
DF6- 6P-3.96C 546-0006-5 6 24.72 19.80
DF6- 7P-3.96C 546-0007-8 7 28.68 23.76
DF6- 8P-3.96C 546-0008-0 8 32.64 27.72
DF6-10P-3.96C 546-0011-5 10 40.56 35.64

Note: A packaging quantity is delivered by the bag unit (100 pcs.).

ICrimping Contact

PDF page 3 diagram

GSlip length

DF6-1822PC (F): 2.1mm to 2.6mm DF6A-1822PC (F): 2.3mm to 2.8mm

GApplicable through-hole: 1.8 0

+0.15

Part Number CL No. Applicable Cable Packaging Type Quantity A B C
UL style Jacket dia. AWG size Contact Construct
DF6 -1822PCF 546-0009-3 1007 1.5 to 2.2mm AWG 18 AWG 20 AWG 22 34 cores/0.18mm 21 cores/0.18mm 17 cores/0.16mm Reel 5,000 10.2 1.5 1.2
DF6 -1822PC 546-0010-2 Bag 100
DF6A-1822PCF 546-0013-0 1015 2.2 to 2.9mm Reel 3,000 10.5 1.7 1.4
DF6A-1822PC 546-0014-3 Bag 100

Note 1. The applicable cable conductor is a tin plated and annealed copper wire. Note 2. If other cables are used instead of the applicable cable, contact the Hirose Sales Department.

BApplicable Crimping Tools

TypeItem Part Number CL No. Applicable Contact
Applicator AP105-DF6-1822P 901-4505-9 DF6 -1822PCF
AP105-DF6A-1822P 901-4520-2 DF6A-1822PCF
Press unit CM-105 901-0005-4 ________
Manual crimping tool DF6 -TA1822HC 550-0174-9 DF6 -1822PC
DF6A-TA1822HC 550-0222-0 DF6A-1822PC
Extraction tool DF-C-PO(A) 550-0170-8 DF6/DF6A-1822PC(F)

Note: If any trouble has been caused due to other tools, which are not designated by Hirose, Hirose never guarantee any products.

B93

Page 4

BPrecautions

1.Recommended soldering condition Flow: 250ç for 3 seconds Manual soldering: 290ç for 2 seconds IAfter soldering, if a load is given to the cable where connector and cable contain heat, the jacket holding member will be loosened. After soldering, the operation should be performed, after connector returns to room temperature.
2.Cleaning condition Refer to the "Nylon Connector Use Hand book". Don't use solvent to degrade the cable jacket like trichloroethane. In addition, avoid heat cleaning with solvent.
3.Connecting condition Refer to the "Nylon Connector Use Hand book".

B94