DF63W HIROSE

Document overview

  • PDF pages: 6

Technical content

Page 1

PDF page 1 diagram
PDF page 1 diagram
PDF page 1 diagram
PDF page 1 diagram

■Features

1. Max current of 14A

This compact connector is rated up to 14A in the 2 positions version, using 16 AWG wire.

2. Compact shape designed for wiring

through narrow areas

The design is optimized for wiring inside conduits and small structures, with a smooth, rounded contour that reduces the chance of snagging or catching inside the conduit or other objects. A plastic housing covers the connector, so no metal is exposed to the conduit, preventing accidental shorting. (Fig.1)

3. IP67 Rated

IP67 water resistant when mated. (Fig.2)

4. Simplified wire insertion

Wire and housing seals are pre-installed to provide water proofing. A simple insertion of the crimped contact into the housing completes the assembly. Contacts and housing are designed to prevent damaging the seals when inserting the contacts.

PDF page 1 diagram

5. Positive lock structure

A robust locking structure provides a tactile click when mating to prevent incomplete mating and disconnection during wiring.

6. Compatible with a wide variety of cables

Two versions are available with different waterproof wire seal diameters. This variation helps to support the use of a wide array of cable sizes.

7. Mis-mating prevention with color and

guide key options

Two housings are available each with different colors and guide keys. This helps to prevent incorrect mating when multiple connectors are used on the same design with the same pin count.

In cases where the application will demand a high level of reliability, such as automotive,

2018.3③

please contact a company representative for further information.

Page 2

■Product Specifications

Ratings Current rating (Note 1) No. of contacts 16 AWG 18 AWG 20 AWG 22 AWG Operating temperature range -40ç to 105ç (Note 2) Operating humidity range 20% to 80%
2 14A 11A Under development
3 13A 10A Under development
4 12A 9A Under development
Voltage rating AC/DC 630V Storage temperature range-10ç to 60ç (Note 3) Storage humidity range 40% to 70% (Note 3)
Items Specifications Conditions
1.Insulation resistance 1,000Mø min. Measured at DC 500V
2.Withstanding voltage No flashover or dielectric breakdown. 1,500V AC applied for 1 minute.
3.Contact resistance 10mø max. Measured at a maximum of 20mø, 100mA (DC or 1,000Hz)
4.Vibration resistance No electrical discontinuity for more than 1µs 10 cycles in each of three axis directions at 10-55Hz, half amplitude 0.75mm
5.Shock resistance No electrical discontinuity for more than 1µs Acceleration of 490m/s2, 11ms, both directions in 3 axes (semi-sinusoidal), 3cycle each direction
6.Moisture resistance Contact resistance : 20mø max. Insulation resistance : 500Mø max. Temperature : 40±2ç, relative humidity : 90 to 95%, left for 96hours
7.Temperature cycle Contact resistance : 20mø max. Insulation resistance : 1,000Mø max. -55ç for 30 minutes➝ 5 to 35ç for 2 to 3 minutes➝ 105ç for 30 minutes➝5 to 35ç for 2 to 3 minutes, in 5 cycles
8.Mating cycles Contact resistance : 20mø max. Mating/unmating : 30 times

Note 1 : Indicates the allowable current when the maximum current is applied to all pins. Please note that a current could exceed the rated value when a higher current is applied through multiple circuits in a branched configuration. Note 2 : Includes temperature rise caused by current flow. Note 3 : The term "storage" refers to the long-term storage condition of unused products before PCB mounting. Operating temperature/humidity range refers to the non powered state after PCB mounting, and temporary storage during transportation.

■Materials / Finish

Product Parts Materials Finish UL flame retardant grade
In-line plug crimp contact Contacts Copper alloy Tin plated -
Socket crimp contact Contacts Copper alloy Tin plated -
In-line plug Housing PBT Black UL94V-0
Seal Silicone rubber Blue or green -
Crimp socket Housing PBT Black UL94V-0
Seal Silicone rubber Blue or green -

■Product Number Structure

Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders.

  • Connector

DF 63W - \* S - 3.96 C

q w e r t

y u

qSeries name : DF tConnector type S : Socket EP : In-line plug
wSeries No. : 63W
eOuter diameter of wire insulation None : 2.8 to 3.2 A : 1.7 to 2.4
yContact pitch : 3.96mm
uTermination style C : Crimp socket
rNumber of contacts : 2, 3, 4
  • Contact

DF 63W - 1618 PCF

q w

e r

qSeries name : DF rContact type/Packaging type SCF : Socket crimp contact, reel SC : Socket crimp contact, pieces PCF : In-line plug crimp contact, reel PC : In-line plug crimp contact, pieces
wSeries No. : 63 (W)
eApplicable wire size 1618 : 16 to 18 AWG 2022 : 20 to 22 AWG

Page 3

■In-line plug

PDF page 3 diagram

Unit : mm

PDF page 3 diagram
HRS No. No. of contacts Outer diameter of wire insulation
680-0605-9 2 2.8 to 3.2
680-0606-1 3
680-0607-4 4
680-0609-0 2 1.7 to 2.4
680-0610-9 3
680-0611-1 4

Note 1 : Standard packaging is 100 pcs/pack. Please place orders in full package quantities.

[Dimensions for 2 contact position connector]

[Dimensions for 3 and 4 contact position connector]

PDF page 3 diagram
PDF page 3 diagram
PDF page 3 diagram

P=3.96

■Crimp socket

PDF page 3 diagram

Unit : mm

PDF page 3 diagram
HRS No. No. of contacts Outer diameter of wire insulation
680-0613-7 2 2.8 to 3.2
680-0614-0 3
680-0615-2 4
680-0617-8 2 1.7 to 2.4
680-0618-0 3
680-0619-3 4

Note 1 : Standard packaging is 100 pcs/pack. Please place orders in full package quantities.

[Dimensions for 2 contact position connector]

[Dimensions for 3 and 4 contact position connector]

PDF page 3 diagram
PDF page 3 diagram
15 P=3.96 P=3.9

Page 4

■In-line plug crimp contact

PDF page 4 diagram

2.14

PDF page 4 diagram
Part No. HRS No. Type Quantity Finish
DF63-1618PCF 680-0529-2 Reel contacts (Note 1) 4,000 pcs/reel Tin plated
DF63-1618PC 680-0536-8 Loose piece contacts (Note 2) 100 pcs/pack
DF63-2022PCF Under development Reel contacts (Note 1) 4,000 pcs/reel
DF63-2022PC Loose piece contacts (Note 2) 100 pcs/pack

Note 1 : Please place orders in full reel quantities. Note 2 : Please place orders in full pack quantities.

  • Applicable wire (Tinned Annealed Copper Wire)
PDF page 4 diagram
Conductor size (Core structure) Wire type and outer diameter of insulati
16AWG (26/0.254mm) UL1007 (2.4mm) UL1015 (3.2mm)
18AWG (34/0.18mm) UL1007 (2.1mm) UL1015 (2.9mm)
20AWG (21/0.18mm) UL1007 (1.9mm)
22AWG (17/0.16mm) UL1430 (1.7mm)
PDF page 4 diagram
PDF page 4 diagram
Part No. HRS No. Type Quantity Finish
DF63W-1618SCF 680-0600-5 Reel contacts (Note 1) 4,000 pcs/reel Tin plated
DF63W-1618SC 680-0601-8 Loose piece contacts (Note 2) 100 pcs/pack
DF63W-2022SCF Under development Reel contacts (Note 1) 4,000 pcs/reel
DF63W-2022SC Loose piece contacts (Note 2) 100 pcs/pack

Note 1 : Please place orders in full reel quantities. Note 2 : Please place orders in full pack quantities.

  • Applicable wire (Tinned Annealed Copper Wire)
Conductor size (Core structure) Wire type and outer diameter of insulati
16AWG (26/0.254mm) UL1007 (2.4mm) UL1015 (3.2mm)
18AWG (34/0.18mm) UL1007 (2.1mm) UL1015 (2.9mm)
20AWG (21/0.18mm) UL1007 (1.9mm)
22AWG (17/0.16mm) UL1430 (1.7mm)

Note 1 : Please contact our Sales Dept. when using wires other than those recommended above. Note 2 : In case of hard to insert crimped contact to socket as like using low stiffness wire which consists of thinner stranded conductor or insulation with soft material, please contact to Hirose representative.

Page 5

BApplicable crimping tools

Type Part No. HRS No. Applicable wire size Applicable contact
Applicator AP105-DF63-1618-3 901-4642-0 UL1007 (Note 3) DF63-1618PCF DF63W-1618SCF
AP105-DF63-1618-4 901-4643-2 UL1015 (Note 3)
CHS893500H-UP (Note 6) - UL1015
AP105-DF63-2022-3 901-4646-0 UL1007 DF63-2022PCF
20 AWG : UL1007 22 AWG : UL1430 DF63W-2022SCF
Type Part No. HRS No. Recommended wire size (Note 5) Applicable contact
Hand tool (Note 4) HT802/DF63-1618P-1 550-0423-1 UL1007 DF63-1618PC
HT802/DF63-1618P-2 550-0424-4 UL1015
HT802/DF63-2022P-1 550-0433-0 UL1007 DF63-2022PC
HT802/DF63W-1618S-1 550-0425-7 UL1007 DF63W-1618SC
HT802/DF63W-1618S-2 550-0426-0 UL1015
HT802/DF63W-2022S-1 550-0434-0 UL1007 DF63W-2022SC

Note 1 : Please follow the "Crimping quality standards" and "Table of crimping conditions" when crimping contacts. Note 2 : Any problems that occur from using tools other than those specified by Hirose, are not covered by warranty. Note 3 : Applicator components (sold separately) can be changed out to accommodate different wire sizes. Note 4 : Hand tool dies cannot be changed out for different wire sizes. Note 5 : Please only use the recommended wires shown in the table. Note 6 : Applicator manufactured by JAPAN AUTOMATIC MACHINE(J.A.M.). Please access to HP of J.A.M., if you make inquiries about the applicator or crimp defect. (URL : http://www.jam-net.co.jp)

BPrecautions

1. Forcibly removing a connector may damage it. If it is stuck, first push it in slightly and then release the

lock to remove.

2. Please use care when connecting a short, thick wire so as not to twist it. If twisted, damage to the

contact may occur.

3. Be sure to turn the power off before mating/unmating the connector. 4. To avoid electrical shock, do not touch the powered contacts.

5. Please contact our Sales Dept. for the Harness procedure manual (ATAD-H0814).

BAbout the ratings

Do not use connectors with currents and voltages that exceed their ratings. Do not mate/unmate powered

contacts (Note 1)

Note 1 : "Live" contacts refer to the contacts that are in a powered or energized state. Mating or unmating "live" contacts can result in electrical shock and injury.

BAbout operating environments

Please contact us if you wish to use the connectors in an environment with repeated temperature

fluctuations.

Page 6

USA:

USA:

HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS CHICAGO OFFICE HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE

2300 Warrenville Road, Suite 150,

2841 Junction Ave, Suite 200

Downers Grove, IL 60515

San Jose, CA. 95134

Phone : +1-630-282-6700

Phone : +1-408-253-9640

http://www.hirose.com/us/

Fax : +1-408-253-9641 http://www.hirose.com/us/

USA:

THE NETHERLANDS:

HIROSE ELECTRIC (U.S.A.), INC. BOSTON OFFICE HIROSE ELECTRIC EUROPE B.V.

300 Brickstone Square Suite 201,

Hogehillweg #8 1101 CC Amsterdam Z-O

Andover, MA 01810

Phone : +31-20-6557460

Phone : +1-978-662-5255

Fax : +31-20-6557469 http://www.hirose.com/eu/

GERMANY:

GERMANY:

HIROSE ELECTRIC EUROPE B.V. NUREMBERG OFFICE HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE

Neumeyerstrasse 22-26, 90411 Nurnberg

Bayernstr. 3, Haus C 30855 Langenhagen, Germany Phone : +49-511 97 82 61 30

Phone : +49-911 32 68 89 63

Fax : +49-511 97 82 61 35

Fax : +49-911 32 68 89 69

http://www.hirose.com/eu/

http://www.hirose.com/eu/

UNITED KINGDOM:

CHINA:

HIROSE ELECTRIC (CHINA) CO., LTD. (SHANGHAI, HEADQUARTERS)

HIROSE ELECTRIC EUROPE BV (UK BRANCH)

18, Enterprise Center Tower 2, 209# Gong He

4 Newton Court, Kelvin Drive, Knowlhill,

Road, Jing’an District, Shanghai, CHINA 200070

Milton Keynes, MK5 8NH

Phone : +86-21-6391-3355

Phone : +44-1908 202050

Fax : +86-21-6391-3335

Fax : +44-1908 202058

http://www.hirose.com/cn/

http://www.hirose.com/eu/

CHINA:

HONG KONG:

HIROSE ELECTRIC (CHINA) CO., LTD. SHENZHEN BRANCH HIROSE ELECTRIC HONGKONG TRADING CO., LTD.

Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre, Room 1001, West Wing, Tsim Sha Tsui Centre, 66

Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong

5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008 Phone : +86-755-8207-0851

Phone : +852-2803-5338

Fax : +86-755-8207-0873

Fax : +852-2591-6560

http://www.hirose.com/cn/

http://www.hirose.com/hk/

SINGAPORE:

KOREA:

HIROSE ELECTRIC SINGAPORE PTE. LTD.

HIROSE KOREA CO.,LTD.

143, Gongdan 1-daero, Siheung-si,

03, Anson Road, #20-01, Springleaf Tower,

Gyeonggi-do, 15084, Korea

Singapore 079909

Phone : +82-31-496-7000

Phone : +65-6324-6113 Fax : +65-6324-6123

Fax : +82-31-496-7100

http://www.hirose.com/sg/

http://www.hirose.co.kr/

MALAYSIA:

INDIA:

HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE PENANG REPRESENTATIVE OFFICE

Unit No-403, 4th Floor, No-84, Barton Centre, Mahatma 73-3-1, Ideal@The One, Jalan Mahsuri, Bayan Gandhi (MG) Road, Bangalore 560 001, Karnataka, India

Lepas Penang, 11950, Malaysia

Phone : +91-80-4120 1907

Phone : +604-648-5536

Fax : +91-80-4120 9908

http://www.hirose.com/sg/

http://www.hirose.com/sg/

PDF page 6 diagram

USA:

HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE)

17197 N. Laurel Park Drive, Suite 253, Livonia, MI 48152 Phone : +1-734-542-9963 Fax : +1-734-542-9964 http://www.hirose.com/us/

GERMANY: HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH

Schoenbergstr. 20, 73760 ostfildern Phone : +49-711-456002-1 Fax : +49-711-456002-299 http://www.hirose.com/eu/

FRANCE: HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE

130 Avenue Joseph Kessel, Bat E, 78960 Voisins le Bretonneux, France Phone : +33-1-85764886 Fax : +33-1-85764823 http://www.hirose.com/eu/

CHINA: HIROSE ELECTRIC (CHINA) CO.,LTD. BEIJING BRANCH

A1001, Ocean International Center, Building 56# East 4th Ring Middle Road, ChaoYang District, Beijing, 100025 Phone : +86-10-5165-9332 Fax : +86-10-5908-1381 http://www.hirose.com/cn/

TAIWAN: HIROSE ELECTRIC TAIWAN CO., LTD.

103 8F, No.87, Zhengzhou Rd., Taipei Phone : +886-2-2555-7377 Fax : +886-2-2555-7355 http://www.hirose.com/tw/

INDIA:

HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE

Office NO.552, Regus-Green Boulevard, Level5, Tower C, Sec62, Plot B-9A, Block B, Noida, 201301, Uttar Pradesh, India Phone : +91-12-660-8018 Fax : +91-120-4804949 http://www.hirose.com/sg/

THAILAND: BANGKOK OFFICE (REPRESENTATIVE OFFICE)

Unit 4703, 47th FL., 1 Empire Tower, South Sathorn Road, Yannawa, Sathorn, Bangkok 10120 Thailand Phone : +66-2-686-1255 Fax : +66-2-686-3433 http://www.hirose.com/sg/

2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN TEL: +81-45-620-3526 Fax: +81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com

The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 03/2018. Contents are subject to change without notice for the purpose of improvements.