DF1B-2S-2.5R HIROSE

Document overview

  • PDF pages: 17

Technical content

Page 1

PDF page 1 diagram
PDF page 1 diagram

IFeatures

PDF page 1 diagram

1. New Insulation Displacement and Crimping Ideas

This connector is a new type to insert the ID contacts in the case. Using this method, the following merits can be gained. 1 By using the ID contact and crimping contact together, different current capacity cables can be mixed in one case. 2 After connection, the contact can be replaced in excellent maintainability. 3 Because the insulation displacement area is protected by the case, high reliability can be assured. 4 Since the insulation displacement process can be performed only by replacing the applicator of the existing crimping machine, no expensive machine for insulation displacement is required.

PDF page 1 diagram

2. Potting Header Available

The high profile header is also available, corresponding to the board potting process (sealed with resin) as waterproof measures.

3. Broad Variations

The single row and double row contacts are aligned for "Board to Cable" and "In-line" series, respectively, while standard tin and gold plating products are available. (Refer to the applicable combination pattern on next page.)

IApplications

Business equipment, particularly including the copy machine and printer

B153

Page 2

BApplicable Combination

K Single Row Type

PDF page 2 diagram

Straight Through hole Type

Socket (Cable Side)

Pin header

DF1B-\*S-2.5R

DF1B-\*P-2.5DSA

Right angle Through hole Type Pin header DF1B-\*P-2.5DS

Panel Mount Type In-line plug (Cable side) DF1BA-\*EP-2.5RC

PDF page 2 diagram

K Double Row Type

Socket (Cable Side) DF1B-\*DS-2.5RC

In-line Connection Product (Cable to Cable Connection) : Full Lock Type

Straight Through hole Type Pin header DF1B-\*DP-2.5DSA

Right angle Through hole Type Pin header DF1B-\*DP-2.5DS

Panel Mount Type In-line plug (Cable side) DF1BA-\*DEP-2.5RC

PDF page 2 diagram

K Single Row Type

Socket (Cable Side) DF1B-\*ES-2.5RC

K Double Row Type

Socket (Cable Side) DF1B-\*DES-2.5RC

B154

In-line plug (Cable side) DF1B-\*EP-2.5RC

In-line plug (Cable side) DF1B-\*DEP-2.5RC

Page 3

IProduct Specifications

Rating Current rating (Note1) AWG 20 to 24: 3A AWG 26 : 2A Cable Size AWG 28 : 1A AWG 30 : 0.5A Operating Temperature Range Operating Moisture Range -35 to +85ç (Note2) -40 to 80%
Storage Temperature Range Storage Moisture Range -10 to +60ç (Note3) -40 to 70% (Note3)
Voltage rating 250V AC
PDF page 3 diagram
UL-CSA Safety Standard Standardized Value
Rating Current rating (Note1) AWG 20 to 22: 3A Cable Size AWG 24 to 28: 1A AWG 30 : 0.5A
Voltage rating 30V AC
Item Specification Condition
1. Insulation Resistance 1000M ohms Min 500V DC
2. Withstanding voltage No flashover or insulation breakdown. 650V AC/1 minute
3. Contact Resistance 30m ohms Max 100mA
4. Insertor/Extraction Force MIN0.44N (45gf), MAX4.4N(450gf) Measure at the square steel pin of 0.635±0.002mm
5. Vibration No electrical discontinuity of 1µs or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
6. Humidity (Steady state) Contact resistance: 30m ohms max.Insulation resistance: 1000M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95%
7. Temperature Cycle Contact resistance: 30m ohms max:Insulation resistance: 1000M ohms min. (-55ç: 30 minutes ➝ 15 to 35ç: 2 to 3 minutes (-85ç: 30 minutes ➝ 15 to 35ç: 2 to 3 minutes) 5 cycles
8. Operating Life Contact resistance: 30m ohms max. Tin plating : 30 cycles Gold plating : 50 cycles
9. Resistance to Soldering heat No deformation of components affecting performance. Flow: 250ç for 10 seconds
Manual soldering: 300ç for 3 seconds

Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.

IMaterial

Product Part Material Finish Remarks
Socket Insulator Polyamide White UL94V-0
ID Contact for Socket Contact Phosphor copper Tin plated or gold plated ––––––
Crimping Contact for Socket Contact Phosphor copper Tin plated or gold plated ––––––
Pin Header Insulator Polyamide White UL94V-0
Contact Brass Tin plated or gold plated ––––––
In-line Plug Insulator Polyamide White UL94V-0
ID Contact for In-line Plug Contact Phosphor copper Tin plated or gold plated ––––––
Crimping Contact for In-line Plug Contact Phosphor copper Tin plated or gold plated ––––––

Note: The whisker method is implemented for tin plating.

B155

Page 4

IOrdering Information

KConnector

DF1B - \* S 2.5 RC

q

w e r

t

q Series Name : DF 1B e Connector Type S : Single row socket DS : Double row socket P : Single row pin header DP : Double row pin header ES : Single row in-line socket DES : Double row in-line socket EP : Single row in-line plug DEP : Double row in-line plug r Contact Pitch: 2.5mm
w Number of Contacts Single Row : 2 to 16, 18, 20 Double Row : 4 to 30, 34, 40 t Contact Type RC : ID/crimping socket (Note) DSA : Straight through hole DS : Right angle through hole Note: The single row socket DF1B-*S-2.5R only adds "R" to the tail, which has the same meaning as "RC".
ocket ID Contact DF1B - R 24 F A q w e r q 1. Connection Type e Packaging Type R : ID Blank : Bag w Applicable Cable Size F : Reel 24 : AWG24 r Plating Type 26 : AWG26 Blank : Tin plated 28 : AWG28 A : Gold plated
q 1. Connection Type R : ID e Packaging Type Blank : Bag F : Reel r Plating Type Blank : Tin plated A : Gold plated
w Applicable Cable Size 24 : AWG24 26 : AWG26 28 : AWG28

KPlug ID Contact

DF1B - 24 P R F B

q w e r t

q Applicable Cable Size 24 : AWG24 26 : AWG26 28 : AWG28 r Packaging Type Blank : Bag F : Reel
t Plating Type Blank : Tin plated A : Gold plated
w Connector Type P : Plug
e Connection Type R : ID

KCrimping Contact

DF1B - 2428 SCF A

q w e

q Applicable Cable Size 2022 : AWG20 to 22 2428 : AWG24 to 28 28 : AWG30 e Plating Type Blank : Tin plating A : Gold plated B : Gold plated (Note) Note: In case of the socket contact, "A" is attached to the tail of the product name. In case of the plug contact, "B" is attached thereto.
w Packaging Type SCF : Socket Contact/Reel SC : Socket Contact/Bag PCF : Plug Contact/Reel PC : Plug Contact/Bag

B156

Page 5

PDF page 5 diagram

ISingle Row Socket

PDF page 5 diagram

Unit: mm

Part Number CL No. Number of Contacts A B Part Number CL No. Number of Contacts A B
DF1B- 2S-2.5R(**) 541-0200-6-** 2 5 2.5 DF1B-11S-2.5R(**) 541-0209-0-** 11 27.5 25
DF1B- 3S-2.5R(**) 541-0201-9-** 3 7.5 5 DF1B-12S-2.5R(**) 541-0210-0-** 12 30 27.5
DF1B- 4S-2.5R(**) 541-0202-1-** 4 10 7.5 DF1B-13S-2.5R(**) 541-0211-2-** 13 32.5 30
DF1B- 5S-2.5R(**) 541-0203-4-** 5 12.5 10 DF1B-14S-2.5R(**) 541-0212-5-** 14 35 32.5
DF1B- 6S-2.5R(**) 541-0204-7-** 6 15 12.5 DF1B-15S-2.5R(**) 541-0213-8-** 15 37.5 35
DF1B- 7S-2.5R(**) 541-0205-0-** 7 17.5 15 DF1B-16S-2.5R(**) 541-0214-0-** 16 40 37.5
DF1B- 8S-2.5R(**) 541-0206-2-** 8 20 17.5 DF1B-18S-2.5R(**) 541-0215-3-** 18 45 42.5
DF1B- 9S-2.5R(**) 541-0207-5-** 9 22.5 20 DF1B-20S-2.5R(**) 541-0216-6-** 20 50 47.5
DF1B-10S-2.5R(**) 541-0208-8-** 10 25 22.5

Note1: The quantity at the specific No."None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag. Note2: The 2 contact connector contains the convex portion to prevent mis-insertion in the center at one point, which is different from the above figure. The 3 to 7 contacts connectors have the area at both ends.

PDF page 5 diagram

IDouble Row Socket

PDF page 5 diagram
Part Number CL No. Number of Contacts A B Part Number CL No. Number of Contacts A B
DF1B- 4DS-2.5RC(**) 541-0648-0-** 4 7.5 2.5 DF1B-22DS-2.5RC(**) 541-0606-0-** 22 30 25
DF1B- 6DS-2.5RC(**) 541-0649-3-** 6 10 5 DF1B-24DS-2.5RC(**) 541-0607-3-** 24 32.5 27.5
DF1B- 8DS-2.5RC(**) 541-0650-2-** 8 12.5 7.5 DF1B-26DS-2.5RC(**) 541-0608-6-** 26 35 30
DF1B-10DS-2.5RC(**) 541-0600-4-** 10 15 10 DF1B-28DS-2.5RC(**) 541-0609-9-** 28 37.5 32.5
DF1B-12DS-2.5RC(**) 541-0601-7-** 12 17.5 12.5 DF1B-30DS-2.5RC(**) 541-0610-8-** 30 40 35
DF1B-14DS-2.5RC(**) 541-0602-0-** 14 20 15 DF1B-34DS-2.5RC(**) 541-0612-3-** 34 45 40
DF1B-16DS-2.5RC(**) 541-0603-2-** 16 22.5 17.5 DF1B-36DS-2.5RC(**) 541-0613-6-** 36 47.5 42.5
DF1B-18DS-2.5RC(**) 541-0604-5-** 18 25 20 DF1B-40DS-2.5RC(**) 541-0615-1-** 40 52.5 47.5
DF1B-20DS-2.5RC(**) 541-0605-8-** 20 27.5 22.5

Note1: The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.) If needed, please order the product per bag. Note2: The 4 contact connector contains the convex portion to prevent miss-insertion in the center at one point, which is different from the above figure.

B157

Page 6

I Single Row Straight Pin Header

PDF page 6 diagram
PDF page 6 diagram

KBoard Through-hole Diameter:Ø1.1+0

Unit: mm

Part Number CL No. Number of Contacts A B Part Number CL No. Number of Contacts A B
DF1B- 2P-2.5DSA(**) 541-0225-7-** 2 2.5 7.5 DF1B-11P-2.5DSA(**) 541-0234-8-** 11 25 30
DF1B- 3P-2.5DSA(**) 541-0226-0-** 3 5 10 DF1B-12P-2.5DSA(**) 541-0235-0-** 12 27.5 32.5
DF1B- 4P-2.5DSA(**) 541-0227-2-** 4 7.5 12.5 DF1B-13P-2.5DSA(**) 541-0236-3-** 13 30 35
DF1B- 5P-2.5DSA(**) 541-0228-5-** 5 10 15 DF1B-14P-2.5DSA(**) 541-0237-6-** 14 32.5 37.5
DF1B- 6P-2.5DSA(**) 541-0229-8-** 6 12.5 17.5 DF1B-15P-2.5DSA(**) 541-0238-9-** 15 35 40
DF1B- 7P-2.5DSA(**) 541-0230-7-** 7 15 20 DF1B-16P-2.5DSA(**) 541-0239-1-** 16 37.5 42.5
DF1B- 8P-2.5DSA(**) 541-0231-0-** 8 17.5 22.5 DF1B-18P-2.5DSA(**) 541-0240-0-** 18 42.5 47.5
DF1B- 9P-2.5DSA(**) 541-0232-2-** 9 20 25 DF1B-20P-2.5DSA(**) 541-0241-3-** 20 47.5 52.5
DF1B-10P-2.5DSA(**) 541-0233-5-** 10 22.5 27.5

Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.) If needed, please order the product per bag. Note 2.The 2 and 3 contact connector contains the concave portion to prevent miss-insertion in the center at one point, which is different from the above figure.In addition, the 4 to 7 contact connectors have two concave portions at both ends.

I Single Row Right Angle Pin Header

PDF page 6 diagram
PDF page 6 diagram

K Board Through-hole Diameter:Ø1.1+0

Unit: mm

Part Number CL No. Number of Contacts A B Part Number CL No. Number of Contacts A B
DF1B- 2P-2.5DS(**) 541-0242-6-** 2 2.5 7.5 DF1B-11P-2.5DS(**) 541-0251-7-** 11 25 30
DF1B- 3P-2.5DS(**) 541-0243-9-** 3 5 10 DF1B-12P-2.5DS(**) 541-0252-0-** 12 27.5 32.5
DF1B- 4P-2.5DS(**) 541-0244-1-** 4 7.5 12.5 DF1B-13P-2.5DS(**) 541-0253-2-** 13 30 35
DF1B- 5P-2.5DS(**) 541-0245-4-** 5 10 15 DF1B-14P-2.5DS(**) 541-0254-5-** 14 32.5 37.5
DF1B- 6P-2.5DS(**) 541-0246-7-** 6 12.5 17.5 DF1B-15P-2.5DS(**) 541-0255-8-** 15 35 40
DF1B- 7P-2.5DS(**) 541-0247-0-** 7 15 20 DF1B-16P-2.5DS(**) 541-0256-0-** 16 37.5 42.5
DF1B- 8P-2.5DS(**) 541-0248-2-** 8 17.5 22.5 DF1B-18P-2.5DS(**) 541-0257-3-** 18 42.5 47.5
DF1B- 9P-2.5DS(**) 541-0249-5-** 9 20 25 DF1B-20P-2.5DS(**) 541-0258-6-** 20 47.5 52.5
DF1B-10P-2.5DS(**) 541-0250-4-** 10 22.5 27.5

Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag. Note 2.The 4 and 6 contact connector contains the concave portion to prevent miss-insertion in the center at one point, which is different from the above figure.

B158

Page 7

I Single Row Straight Pin Header for Potting

PDF page 7 diagram
PDF page 7 diagram

B Tube Size

PDF page 7 diagram

Unit: mm

Part Number CL No. Number of Contacts A B Tube Package Quantity
DF1BD- 2P-2.5DSA(**) 541-0800-3-** 2 2.5 7.5 64pieces
DF1BD- 3P-2.5DSA(**) 541-0801-6-** 3 5 10 48
DF1BD- 4P-2.5DSA(**) 541-0802-9-** 4 7.5 12.5 38
DF1BD- 5P-2.5DSA(**) 541-0803-1-** 5 10 15 32
DF1BD- 6P-2.5DSA(**) 541-0804-4-** 6 12.5 17.5 27
DF1BD- 7P-2.5DSA(**) 541-0805-7-** 7 15 20 24
DF1BD- 8P-2.5DSA(**) 541-0806-0-** 8 17.5 22.5 21
DF1BD- 9P-2.5DSA(**) 541-0807-2-** 9 20 25 19
DF1BD-10P-2.5DSA(**) 541-0808-5-** 10 22.5 27.5 17

K Board Positioning Boss Hole Diameter:Ø1.1+0

+0.1

K Board Through-hole Diameter:Ø1.1+0

+0.1

Blank: Tin plated (20) : Tin plated, tube packaging

Note 1.A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the product per pack. Note 2.Please order the tube packaging products, multiplying the packaging quantity (pieces). Note 3.The 2 and 3 contact connector contains the concave portion to prevent miss-insertion in the center at one point, which is different from the above figure.In addition, the 4 to 7 contacts connectors have two concave portions at both ends.

BApplicable Potting Thickness : 6mm

PDF page 7 diagram

B159

Page 8

I Double Row Straight Pin Header

PDF page 8 diagram
PDF page 8 diagram

GBoard Through-hole Diameter:Ø1.1+0

Unit: mm

Part Number CL No. Number of Contacts A B Part Number CL No. Number of Contacts A B
DF1B- 4DP-2.5DSA(**) 541-0651-5-** 4 7.5 2.5 DF1B-20DP-2.5DSA(**) 541-0621-4-** 20 27.5 22.5
DF1B- 6DP-2.5DSA(**) 541-0652-8-** 6 10 5 DF1B-22DP-2.5DSA(**) 541-0622-7-** 22 30 25
DF1B- 8DP-2.5DSA(**) 541-0653-0-** 8 12.5 7.5 DF1B-24DP-2.5DSA(**) 541-0623-0-** 24 32.5 27.5
DF1B-10DP-2.5DSA(**) 541-0616-4-** 10 15 10 DF1B-26DP-2.5DSA(**) 541-0624-2-** 26 35 30
DF1B-12DP-2.5DSA(**) 541-0617-7-** 12 17.5 12.5 DF1B-28DP-2.5DSA(**) 541-0625-5-** 28 37.5 32.5
DF1B-14DP-2.5DSA(**) 541-0618-0-** 14 20 15 DF1B-30DP-2.5DSA(**) 541-0626-8-** 30 40 35
DF1B-16DP-2.5DSA(**) 541-0619-2-** 16 22.5 17.5 DF1B-34DP-2.5DSA(**) 541-0628-3-** 34 45 40
DF1B-18DP-2.5DSA(**) 541-0620-1-** 18 25 20 DF1B-40DP-2.5DSA(**) 541-0631-8-** 40 52.5 47.5

Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag. Note 2.The 4 and 6 contact connector contains the concave portion to prevent miss-insertion in the center area at one point, which is different from the above figure.

IDouble Row Right Angle Pin Header

PDF page 8 diagram
PDF page 8 diagram

K Board Through-hole Diameter:Ø1.1+0

Unit: mm

Part Number CL No. Number of Contacts A B Part Number CL No. Number of Contacts A B
DF1B- 4DP-2.5DS(**) 541-0654-3-** 4 7.5 2.5 DF1B-22DP-2.5DS(**) 541-0638-7-** 22 30 25
DF1B- 6DP-2.5DS(**) 541-0655-6-** 6 10 5 DF1B-24DP-2.5DS(**) 541-0639-0-** 24 32.5 27.5
DF1B- 8DP-2.5DS(**) 541-0656-9-** 8 12.5 7.5 DF1B-26DP-2.5DS(**) 541-0640-9-** 26 35 30
DF1B-10DP-2.5DS(**) 541-0632-0-** 10 15 10 DF1B-28DP-2.5DS(**) 541-0641-1-** 28 37.5 32.5
DF1B-12DP-2.5DS(**) 541-0633-3-** 12 17.5 12.5 DF1B-30DP-2.5DS(**) 541-0642-4-** 30 40 35
DF1B-14DP-2.5DS(**) 541-0634-6-** 14 20 15 DF1B-34DP-2.5DS(**) 541-0644-0-** 34 45 40
DF1B-16DP-2.5DS(**) 541-0635-9-** 16 22.5 17.5 DF1B-36DP-2.5DS(**) 541-0645-2-** 36 47.5 42.5
DF1B-18DP-2.5DS(**) 541-0636-1-** 18 25 20 DF1B-40DP-2.5DS(**) 541-0647-8-** 40 52.5 47.5
DF1B-20DP-2.5DS(**) 541-0637-4-** 20 27.5 22.5

Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag. Note 2.The 4 and 6 contact connector contains the concave portion to prevent miss-insertion in the center area at one point, which is different from the above figure.

B160

Page 9

PDF page 9 diagram

I Single Row In-line Plug(Simple Lock Type)

PDF page 9 diagram

KApplicable Socket: DF1B-\*S-2.5R

Blank: Tin plated (01) : Gold plated

PDF page 9 diagram

Unit: mm

Part Number CL No. Number of Contacts A B Part Number CL No. Number of Contacts A B
DF1BA- 2EP-2.5RC(**) 541-0700-9-** 2 2.5 7.1 DF1BA- 8EP-2.5RC** 541-0706-5-** 8 17.5 22.1
DF1BA- 3EP-2.5RC(**) 541-0701-1-** 3 5 9.6 DF1BA- 9EP-2.5RC** 541-0707-8-** 9 20 24.6
DF1BA- 4EP-2.5RC(**) 541-0702-4-** 4 7.5 12.1 DF1BA-10EP-2.5RC** 541-0708-0-** 10 22.5 27.1
DF1BA- 5EP-2.5RC(**) 541-0703-7-** 5 10 14.6 DF1BA-11EP-2.5RC** 541-0709-3-** 11 25 29.6
DF1BA- 6EP-2.5RC(**) 541-0704-0-** 6 12.5 17.1 DF1BA-12EP-2.5RC** 541-0710-2-** 12 27.5 32.1
DF1BA- 7EP-2.5RC(**) 541-0705-2-** 7 15 19.6 DF1BA-13EP-2.5RC** 541-0711-5-** 13 30 34.6

Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag. Note 2.The 2 contacts connector contains the concave portion to prevent miss-insertion in the center area at one point, which is different from the above figure.In addition, the 3 to 7 contact connectors contain the concave portion at both sides.

B Panel Cutouts

PDF page 9 diagram
Applicable Plug Number of Contacts C D
Panel Board Thickness (Note 1)
0.5 to 1.2 1.3 to 1.6 1.7 to 2.0
DF1BA- 2EP-2.5RC(**) 2 11.2 11.9 12.6 7.3
DF1BA- 3EP-2.5RC(**) 3 13.7 14.4 15.1 9.8
DF1BA- 4EP-2.5RC(**) 4 16.2 16.9 17.6 12.3
DF1BA- 5EP-2.5RC(**) 5 18.7 19.4 20.1 14.8
DF1BA- 6EP-2.5RC(**) 6 21.2 21.9 22.6 17.3
DF1BA- 7EP-2.5RC(**) 7 23.7 24.4 25.1 19.8
DF1BA- 8EP-2.5RC(**) 8 26.2 26.9 27.6 22.3
DF1BA- 9EP-2.5RC(**) 9 28.7 29.4 30.1 24.8
DF1BA-10EP-2.5RC(**) 10 31.2 31.9 32.6 27.3
DF1BA-11EP-2.5RC(**) 11 33.7 34.4 35.1 29.8
DF1BA-12EP-2.5RC(**) 12 36.2 36.9 37.6 32.3
DF1BA-13EP-2.5RC(**) 13 38.7 39.4 40.1 34.8

Note 1.The installation hole size C according to panel board thickness. Note 2.Fabricate installation holes so that no burr can occur.

B161

Page 10

I Double Row In-line Plug (Simple Lock Type)

PDF page 10 diagram
PDF page 10 diagram

KApplicable Socket: DF1B-\*DS-2.5RC

Blank: 100 pcs. per pack

PDF page 10 diagram

Unit: mm

Part Number CL No. Number of Contacts A B Part Number CL No. Number of Contacts A B
DF1BA- 4DEP-2.5RC(**) 541-0719-7-** 4 2.5 8.6 DF1BA-20DEP-2.5RC(**) 541-0727-5-** 20 22.5 28.6
DF1BA- 6DEP-2.5RC(**) 541-0720-6-** 6 5 11.1 DF1BA-22DEP-2.5RC(**) 541-0728-8-** 22 25 31.1
DF1BA- 8DEP-2.5RC(**) 541-0721-9-** 8 7.5 13.6 DF1BA-24DEP-2.5RC(**) 541-0729-0-** 24 27.5 33.6
DF1BA-10DEP-2.5RC(**) 541-0722-1-** 10 10 16.1 DF1BA-26DEP-2.5RC(**) 541-0730-0-** 26 30 36.1
DF1BA-12DEP-2.5RC(**) 541-0723-4-** 12 12.5 18.6 DF1BA-28DEP-2.5RC(**) 541-0731-2-** 28 32.5 38.6
DF1BA-14DEP-2.5RC(**) 541-0724-7-** 14 15 21.1 DF1BA-30DEP-2.5RC(**) 541-0732-5-** 30 35 41.1
DF1BA-16DEP-2.5RC(**) 541-0725-0-** 16 17.5 23.6 DF1BA-34DEP-2.5RC(**) 541-0734-0-** 34 40 46.1
DF1BA-18DEP-2.5RC(**) 541-0726-2-** 18 20 26.1

Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag. Note 2.The 4 contacts connector contains the concave portion to prevent miss-insertion in the center at one point, which is different from the above figure.

B Panel Cutouts

PDF page 10 diagram
PDF page 10 diagram

Unit: mm

Applicable Plug Number of Contacts C D
Panel Board Thickness (Note 1)
0.5 to 1.2 1.3 to 1.6 1.7 to 2.0
DF1BA- 4DEP-2.5RC 4 12.7 13.4 14.1 8.8
DF1BA- 6DEP-2.5RC 6 15.2 15.9 16.6 11.3
DF1BA- 8DEP-2.5RC 8 17.7 18.4 19.1 13.8
DF1BA-10DEP-2.5RC 10 20.2 20.9 21.6 16.3
DF1BA-12DEP-2.5RC 12 22.7 23.4 24.1 18.8
DF1BA-14DEP-2.5RC 14 25.2 25.9 26.6 21.3
DF1BA-16DEP-2.5RC 16 27.7 28.4 29.1 23.8
DF1BA-18DEP-2.5RC 18 30.2 30.9 31.6 26.3
DF1BA-20DEP-2.5RC 20 32.7 33.4 34.1 28.8
DF1BA-22DEP-2.5RC 22 35.2 35.9 36.6 31.3
DF1BA-24DEP-2.5RC 24 37.7 38.4 39.1 33.8
DF1BA-26DEP-2.5RC 26 40.2 40.9 41.6 36.3
DF1BA-28DEP-2.5RC 28 42.7 43.4 44.1 38.8
DF1BA-30DEP-2.5RC 30 45.2 45.9 46.6 41.3
DF1BA-34DEP-2.5RC 34 50.2 50.9 51.6 46.3

Note 1.The installation hole size C according to panel board thickness. Note 2.Fabricate installation holes so that no burr can occur.

B162

Page 11

I Single Row In-line Socket (Full Lock Type)

PDF page 11 diagram
PDF page 11 diagram

KApplicable Socket: DF1B-\*DEP-2.5RC

Blank: 100 pcs. per pack

Unit: mm

Part Number CL No. Number of Contacts A B Part Number CL No. Number of Contacts A B
DF1B- 2ES-2.5RC 541-0320-8- 2 2.5 6.5 DF1B- 8ES-2.5RC 541-0326-4- 8 17.5 21.5
DF1B- 3ES-2.5RC 541-0321-0- 3 5 9 DF1B- 9ES-2.5RC 541-0327-7- 9 20 24
DF1B- 4ES-2.5RC 541-0322-3- 4 7.5 11.5 DF1B-10ES-2.5RC 541-0328-0- 10 22.5 26.5
DF1B- 5ES-2.5RC 541-0323-6- 5 10 14 DF1B-11ES-2.5RC 541-0329-2- 11 25 29
DF1B- 6ES-2.5RC 541-0324-9- 6 12.5 16.5 DF1B-12ES-2.5RC 541-0330-1- 12 27.5 31.5
DF1B- 7ES-2.5RC 541-0325-1- 7 15 19 DF1B-13ES-2.5RC 541-0331-4- 13 30 34

Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.

B Panel Cutouts

PDF page 11 diagram
PDF page 11 diagram

Unit: mm

Applicable Plug Number of Contacts C D E
Panel Board Thickness (Note 1)
0.5 to 1.2 1.3 to 1.6 1.7 to 2.0
DF1B- 2ES-2.5RC 2 4.7 6.7 10.8 11.3 12
DF1B- 3ES-2.5RC 3 7.2 9.2 13.3 13.8 14.5
DF1B- 4ES-2.5RC 4 9.7 11.7 15.8 16.3 17
DF1B- 5ES-2.5RC 5 12.2 14.2 18.3 18.8 19.5
DF1B- 6ES-2.5RC 6 14.7 16.7 20.8 21.3 22
DF1B- 7ES-2.5RC 7 17.2 19.2 23.3 23.8 24.5
DF1B- 8ES-2.5RC 8 19.7 21.7 25.8 26.3 27
DF1B- 9ES-2.5RC 9 22.2 24.2 28.3 28.8 29.5
DF1B-10ES-2.5RC 10 24.7 26.7 30.8 31.3 32
DF1B-11ES-2.5RC 11 27.2 29.2 33.3 33.8 34.5
DF1B-12ES-2.5RC 12 29.7 31.7 35.8 36.3 37
DF1B-13ES-2.5RC 13 32.2 34.2 38.3 38.8 39.5

Note 1.The installation hole size C will be changed according to panel board thickness. Note 2.Fabricate installation holes so that no burr can occur.

B163

Page 12

I Double Row In-line Socket (Full Lock Type)

PDF page 12 diagram
PDF page 12 diagram

KApplicable Socket: DF1B-\*EP-2.5RC

Blank: 100 pcs. per pack

Unit: mm

Part Number CL No. Number of Contacts A B Part Number CL No. Number of Contacts A B
DF1B-10DES-2.5RC(**) 541-0351-1-** 10 10 15 DF1B-24DES-2.5RC(**) 541-0357-8-** 24 27.5 32.5
DF1B-12DES-2.5RC(**) 541-0352-4-** 12 12.5 17.5 DF1B-26DES-2.5RC(**) 541-0358-0-** 26 30 35
DF1B-14DES-2.5RC(**) 541-0353-7-** 14 15 20 DF1B-28DES-2.5RC(**) 541-0359-3-** 28 32.5 37.5
DF1B-16DES-2.5RC(**) 541-0354-0-** 16 17.5 22.5 DF1B-30DES-2.5RC(**) 541-0360-2-** 30 35 40
DF1B-18DES-2.5RC(**) 541-0346-1-** 18 20 25 DF1B-32DES-2.5RC(**) 541-0361-5-** 32 37.5 42.5
DF1B-20DES-2.5RC(**) 541-0355-2-** 20 22.5 27.5 DF1B-34DES-2.5RC(**) 541-0362-8-** 34 40 45
DF1B-22DES-2.5RC(**) 541-0356-5-** 22 25 30

Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.

B Panel Cutouts

PDF page 12 diagram
PDF page 12 diagram

Unit: mm

Applicable Plug Number of Contacts C D E
Panel Board Thickness (Note 1)
0.5 to 1.2 1.3 to 1.6 1.7 to 2.0
DF1B-10DES-2.5RC(**) 10 19.1 19.8 20.5 15.2 3.7
DF1B-12DES-2.5RC(**) 12 21.6 22.3 23 17.7 3.7
DF1B-14DES-2.5RC(**) 14 24.1 24.8 25.5 20.2 3.7
DF1B-16DES-2.5RC(**) 16 26.6 27.3 28 22.7 3.7
DF1B-18DES-2.5RC(**) 18 29.1 29.8 30.5 25.2 3.7
DF1B-20DES-2.5RC(**) 20 31.6 32.3 33 27.7 5.2
DF1B-22DES-2.5RC(**) 22 34.1 34.8 35.5 30.2 5.2
DF1B-24DES-2.5RC(**) 24 36.6 37.3 38 32.7 5.2
DF1B-26DES-2.5RC(**) 26 39.1 39.8 40.5 35.2 5.2
DF1B-28DES-2.5RC(**) 28 41.6 42.3 43 37.7 5.2
DF1B-30DES-2.5RC(**) 30 44.1 44.8 45.5 40.2 5.2
DF1B-32DES-2.5RC(**) 32 46.6 47.3 48 42.7 5.2
DF1B-34DES-2.5RC(**) 34 49.1 49.8 50.5 45.2 5.2

Note 1.The installation hole size C according to panel board thickness. Note 2.Fabricate installation holes so that no burr can occur.

B164

Page 13

I Single Row In-line Plug (Full Lock Type)

PDF page 13 diagram
PDF page 13 diagram

KApplicable Socket: DF1B-\*ES-2.5RC

PDF page 13 diagram

Unit: mm

Part Number CL No. Number of Contacts A B Part Number CL No. Number of Contacts A B
DF1B- 2EP-2.5RC(**) 541-0332-7-** 2 8.9 2.5 DF1B- 8EP-2.5RC(**) 541-0338-3-** 8 23.9 17.5
DF1B- 3EP-2.5RC(**) 541-0333-0-** 3 11.4 5 DF1B- 9EP-2.5RC(**) 541-0339-6-** 9 26.4 20
DF1B- 4EP-2.5RC(**) 541-0334-2-** 4 13.9 7.5 DF1B-10EP-2.5RC(**) 541-0340-5-** 10 28.9 22.5
DF1B- 5EP-2.5RC(**) 541-0335-5-** 5 16.4 10 DF1B-11EP-2.5RC(**) 541-0341-8-** 11 31.4 25
DF1B- 6EP-2.5RC(**) 541-0336-8-** 6 18.9 12.5 DF1B-12EP-2.5RC(**) 541-0342-0-** 12 33.9 27.5
DF1B- 7EP-2.5RC(**) 541-0337-0-** 7 21.4 15 DF1B-13EP-2.5RC(**) 541-0343-3-** 13 36.4 30

Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.

I Double Row In-line Plug (Full Lock Type)

PDF page 13 diagram
PDF page 13 diagram

KApplicable Socket: DF1B-\*DES-2.5RC

Blank: 100 pcs. per pack

PDF page 13 diagram

Unit: mm

Part Number CL No. Number of Contacts A B Part Number CL No. Number of Contacts A B
DF1B-10DEP-2.5RC(**) 541-0366-9-** 10 17.2 10 DF1B-24DEP-2.5RC(**) 541-0372-1-** 24 34.7 27.5
DF1B-12DEP-2.5RC(**) 541-0367-1-** 12 19.7 12.5 DF1B-26DEP-2.5RC(**) 541-0373-4-** 26 37.2 30
DF1B-14DEP-2.5RC(**) 541-0368-4-** 14 22.2 15 DF1B-28DEP-2.5RC(**) 541-0374-7-** 28 39.7 32.5
DF1B-16DEP-2.5RC(**) 541-0369-7-** 16 24.7 17.5 DF1B-30DEP-2.5RC(**) 541-0375-0-** 30 42.2 35
DF1B-18DEP-2.5RC(**) 541-0350-9-** 18 27.2 20 DF1B-32DEP-2.5RC(**) 541-0376-2-** 32 44.7 37.5
DF1B-20DEP-2.5RC(**) 541-0370-6-** 20 29.7 22.5 DF1B-34DEP-2.5RC(**) 541-0377-5-** 34 47.2 40
DF1B-22DEP-2.5RC(**) 541-0371-9-** 22 32.2 25

Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.

B165

Page 14

I ID Contact for Socket

PDF page 14 diagram

Unit: mm

Part Number CL No. Applicable Cable Indication Applicable Cable Packaging Type Quantity Finish
AWG UL Style Wire Construction Jacket Diameter
DF1B-R24F 541-0217-9 Reel 10000
DF1B-R24 541-0220-3 24 AWG 24 1061 11 cores./0.16mm 0.9 to 1.39mm Bag 100
DF1B-R26F 541-0218-1 1061 Reel 10000
DF1B-R26 541-0221-6 26 AWG 26 1007 7 cores./0.16mm 0.9 to 1.39mm Bag 100 Tin plated
DF1B-R28F 541-0219-4 1061 Reel 10000
DF1B-R28 541-0222-9 28 AWG 28 1007 7 cores./0.127mm 0.9 to 1.39mm Bag 100
DF1B-R24FA 541-0261-0 Reel 10000
DF1B-R24A 541-0264-9 24 AWG 24 1061 11 cores./0.16mm 0.9 to 1.39mm Bag 100
DF1B-R26FA 541-0262-3 1061 Reel 10000
DF1B-R26A 541-0265-1 26 AWG 26 1007 7 cores./0.16mm 0.9 to 1.39mm Bag 100 Gold plated
DF1B-R28FA 541-0263-6 1061 Reel 10000
DF1B-R28A 541-0266-4 28 AWG 28 1007 7 cores./0.127mm 0.9 to 1.39mm Bag 100
K ID Contact Extraction Tool DF-C-PO (A) Note 1.The applicable cable conductor is the tin plated annealing copper wire. Note 2.If other cables are used instead of the applicable cable, cotact Hirose sales department.

I Crimping Contact for Socket

PDF page 14 diagram

K Applicable Cable (Tin Plated Annealing Copper Wire)

PDF page 14 diagram

K Recommended Cable UL1061, UL1007 K Strip Length 2.0 to 2.5mm Note:If other cables are used instead of the applicable cable, consult Hirose sales department.

Unit: mm

Part Number CL No. Applicable Cable Indication Applicable Cable Packaging Type Quantity Finish
AWG Jacket Diameter
DF1B-2022SCF 541-0223-1 20 AWG 20 to Reel 10000
DF1B-2022SC 541-0224-4 22 AWG 22 1.2 to 1.9mm Bag 100
DF1B-2428SCF 541-0678-1 24 AWG 24 to Reel 10000
DF1B-2428SC 541-0679-4 28 AWG 28 0.9 to 1.5mm Bag 100 Tin plated
DF1B-30SCF 541-0682-9 Reel 10000
DF1B-30SC 541-0683-1 30 AWG 30 0.6 to 1.2mm Bag 100
DF1B-2022SCFA 541-0662-1 20 AWG 20 to Reel 10000
DF1B-2022SCA 541-0663-4 22 AWG 22 1.2 to 1.9mm Bag 100
DF1B-2428SCFA 541-0680-3 24 AWG 24 to Reel 10000
DF1B-2428SCA 541-0681-6 28 AWG 28 0.9 to 1.5mm Bag 100 Gold plated
DF1B-30SCFA 541-0684-4 Reel 10000
DF1B-30SCA 541-0685-7 30 AWG 30 0.6 to 1.2mm Bag 100

K Crimping Contact Extraction Tool DF-C-PO (B)

B166

Page 15

I ID Contact for Plug

PDF page 15 diagram

Unit: mm

PDF page 15 diagram

K Crimping Contact Extraction Tool DF-C-PO (C)

B167

Page 16

B Applicable Tool

PDF page 16 diagram

Note: If a trouble has occurred due to tools which are not designated by Hirose, Hirose won't guarantee any product

B168

Page 17

B Applicable Tool

PDF page 17 diagram
1. Recommended Soldering Condition Flow: 250ç for 3 seconds Manual soldering: 290ç for 2 seconds
2. Cleaning Condition Refer to Nylon Connector Use Hand book.
3. Connection Condition Refer to Nylon Connector Use Hand book.
4. Cautions IThe color phase of this product is slightly different from that of the formed product according to the manufacturing lot and future storage conditions, but the difference doesn't affect the performance.

B169