PXI-2010 ETC2

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

  • Supports a 32-bit 3.3 V or 5 V PCI bus (DAQ-2000 series)
  • x1 lane PCI Express Interface (DAQe-2000 series)
  • PXI specification Rev. 2.2 compliant (PXI-2000 series)
  • 4-CH differential analog inputs
  • Bipolar or unipolar analog input ranges
  • Programmable gains of x1, x2, x4, x8
  • Scatter-gather DMA for both analog inputs and outputs
  • 2-CH 12-bit multiplying analog outputs with waveform generation
  • 24-CH TTL digital input/output
  • 2-CH 16-bit general-purpose timer/counter
  • Analog and digital triggering
  • Fully auto calibration
  • Multiple cards synchronization through SSI (System
  • Synchronization Interface) bus or PXI trigger bus Introduction ADLINK's PXI/DAQ/DAQe-2000 series of products are simultaneous- sampling multi-functionDAQ cards to meet a wide range of application requirements. The devices can simultaneously sample

4 AI channels with differential input configurations in order to

achieve maximum noise elimination. They also provide 2-CH 12- bit analog outputs with waveform generation capability, which can be performed together with analog input functions. If more analog input or output channels are required, multiple cards can be synchronized through the SSI (System Synchronization Interface) bus. This makes the PXI/DAQ/DAQe-2000 series ideal for stimulus/ response testing. The PXI/DAQ/DAQe-2000 series also features analog and digital triggering, 24-CH programmable digital I/O lines, and 2-CH 16-bit general-purpose timer/counter. The auto-calibration functions adjust the gain and offset to within specified accuracies such that you do not have to adjust trimpots to calibrate the cards.

Ordering Information

  • PXI/DAQ/DAQe-2010 4-CH DI 14 bits 2 MS/s MS/s Simultaneous-Sampling Multi-Function DAQ Cards
  • PXI/DAQ/DAQe-2005 4-CH DI 16 bits 500 kS/s MS/s Simultaneous-Sampling Multi-Function DAQ Cards
  • PXI/DAQ/DAQe-2006 4-CH DI 16 bits 250 kS/s MS/s Simultaneous-Sampling Multi-Function DAQ Cards PXI-2010 DAQe-2010 DAQ-2010

www.adlinktech.com All products and company name listed are trademarks or trade names of their respective companies. Updated Dec. 2, 2016. ©2016 ADLINK Technology, Inc. All Rights Reserved. All specifications are subject to change without further notice. Specifications Model Name PXI/DAQ/DAQe-2010 PXI/DAQ/DAQe-2005 PXI/DAQ/DAQe-2006 Analog Input Resolution 14 bits 16 bits, no missing codes 16 bits, no missing codes Number of channels 4 simultaneous-sampling channels with differential input Maximum sampling rate 2 MS/s 500 kS/s 250 kS/s Programmable gain 1, 2, 4, 8 Bipolar input ranges ±10 V, ±5 V, ±2.5 V, ±1.25 V Unipolar input ranges 0-10 V, 0-5 V, 0-2.5 V, 0-1.25 V Offset error ±3 mV 2 mV ±1 mV Gain error ±0.1% of FSR ±0.04% of FSR ±0.03% of FSR Input Coupling DC Overvoltage protection Power on: Continuous ±35 V, Power off: Continuous ±15 V Input Impedance 1 GΩ/100 pF CMRR (gain = 1) 85 dB -3 dB small signal bandwidth (gain = 1) 1 MHz 1 MHz 600 kHz Trigger sources Software, external digital/analog trigger, SSI bus Trigger modes Pre-trigger, post-trigger, middle-trigger, delay-trigger, and repeated trigger FIFO buffer size 8 k samples 512 samples 512 samples Data transfers Polling, scatter-gather DMA Analog Output Number of channels 2 voltage outputs Resolution 12 bits Output ranges 0-10 V, ±10 V, 0-AOEXTREF, ±AOEXTREF Maximum update rate 1 μs Slew rate 20 V/μs Settling time 3 μs to ±0.5 LSB accuracy Offset error ±3mV ±1mV ±1mV Driving capacity 5 mA Stabililty Any passive load, up to 1500 pF Trigger sources Software, external digital/analog trigger, SSI bus Trigger modes Post-trigger, delay-trigger, and repeated trigger FIFO buffer size 2 k samples Data transfers Programmed I/O, scatter-gather DMA Digital I/O Number of channels 8255 24-bit programmable input/output Compatibility 5 V/TTL Data transfers Programmed I/O Timer/Counter Number of channels 2 Resolution 16 bits Compatibility 5 V/TTL Base clock available 40 MHz , external clock up to 10 MHz Auto Calibration Onboard reference +5 V Temperature drift ±2 ppm/˚C Stabililty 6 ppm/1000 Hrs General Specifications Dimensions 160 mm x 100 mm (not including connectors) (PXI-2000 series) 175 mm x 107 mm (not including connectors) (DAQ-2000 series) 168 mm x 107 mm (not including connectors) (DAQe-2000 series) Connector 68-pin VHDCI-type female Operating temperature 0 to 55˚C Storage temperature -20 to 70˚C Humidity 5 to 95%, non-condensing Power requirements +5 V 1.82 A typical (PXI/DAQ-2010) +3.3 V 1.246 A, +12 V 0.448 A typical (DAQe-2010) +5 V 2.04 A typical (PXI/DAQ-2005) +3.3 V 1.03 A, +12 V 0.75 A typical (DAQe-2005) +5 V 1.82 A typical (DAQ-2006) +3.3 V 1.02 A, +12 V 0.67 A typical (DAQe-2006)

SDI3_1 / NC* 9 43 SDI3_0 / NC* SDI2_1 / NC* 10 44 SDI2_0 / NC* SDI1_1 / NC* 11 45 SDI1_0 / NC* SDI0_1 / NC* 12 46 SDI0_0 / NC* AO_TRIG_OUT 13 47 EXTWFTRG AI_TRIG_OUT 14 48 EXTDTRIG GPTC1_SRC 15 49 DGND GPTC0_SRC 16 50 DGND GPTC0_GATE 17 51 GPTC1_GATE GPTC0_OUT 18 52 GPTC1_OUT GPTC0_UPDOWN 19 53 GPTC1_UPDOWN EXTTIMEBASE 20 54 DGND AFI1 21 55 AFI0 PB7 22 56 PB6 PB5 23 57 PB4 PB3 24 58 PB2 PB1 25 59 PB0 PC7 26 60 PC6 PC5 27 61 PC4 DGND 28 62 DGND PC3 29 63 PC2 PC1 30 64 PC0 PA7 31 65 PA6 PA5 32 66 PA4 PA3 33 67 PA2 PA1 34 68 PA0 *Pin 9-12 and pin 43-46 are SDI<0..3>_n for 2010; NC for 2005, and 2006