CXA-P1212C-WJL POWER-SYSTEMS
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
CXA-P1212C-WJL (8W DUAL OUTPUTS WITH DIMMING FUNCTION) DC-AC INVERTER UNIT Power Systems – The Power Solution Web: www.Power-Systems.de Address: Dörnet 8 ; 74360 Ilsfeld-Auenstein / Germany Email: Info@Power-Systems.de Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 80 All specification are subject to change without notice. Page (1 / 2) VER, 04 February 2004 DESCRIPTION : This low profile DC to AC Inverter is developed for dual lamps, low power LCD back-light. Application includes industrial PC and LCD monitor. APPLICABLE LCD: 8 to 12 inches double lamp type Lamp Voltage 600Vrms Lamp Current 6mArms Lamp Start Up Voltage 1700Vrms (Vin : 12V) FEATURES : Wide operating temperature range Alarm signal function PWM dimming type. Current Feedback Circuit Silicon Coating in High Voltage area TEMPERATURE & HUMDITY : Operating Temperature Range -10 °C ~ +70°C Storage Temperature Range -30 °C~ +85°C Humidity 95 %RH max DIMENSIONS : Unit : mm Weight :25 (g) typ. CN1-1 CN1-7 Silicone CN2 CXA-P1212C-WJL 1415 MADE IN JAPAN CAUTION HIGH VOLTAGE (1.0)
8.5 MAX
High Voltage generation area:75mm CN1 10.25 ± 0.5 153 ± 0.5 14 ± 0.3 107 ± 0.5 21.5 ± 0.5 1 23 2 - Ø3.5 ± 0.2 600Vrms (6mArms)Vhigh2 (2V) Vst*1 Vlow CN1-7 CN1-6 0 ~ 0.4V : OFF 2.5V ~ Vin : ON Pin CN1-1 CN1-2 CN1-3 CN1-4 CN1-5 Symbol Vin GND Vrmt Vbr / Rbr Note 10.8 ~ 13.2V 0 V 0 ~ 2.5V / 0 ~ 50k 0V / 5V CN1 : 53261-0790 (Molex) CN2 : SM03(7-D1)B-BHS-1 or SM04(4.0)B-BHS-1 (JST) CN2-1 CN2-2 CN2-3 N.C. Pin Symbol Note Vhigh1 600Vrms (6mArms) No. Part Description PWB Connector CN1 Connector CN2 Note UL94V-0 t=1.0mm 53261-0790 SM03(7-D1)B-BHS-1 or SM04(4.0)B-BHS Qty. 1 (JST) (Molex) Ω *1. This is an output pin and it is active high (+5V) if any Lamp opens / fails CN2-4
CXA-P1212C-WJL (8W DUAL OUTPUTS WITH DIMMING FUNCTION) DC-AC INVERTER UNIT Power Systems – The Power Solution Web: www.Power-Systems.de Address: Dörnet 8 ; 74360 Ilsfeld-Auenstein / Germany Email: Info@Power-Systems.de Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 80 All specification are subject to change without notice. Page (2 / 2) VER, 04 February 2004 ELECTRICAL CHARACTERISTICS : TEST CIRCUIT : SW1 a b Operation of unit Operation Non operation SW2 a b Voltage dimming Variable resistance dimming Operation of unit Vbr=0~2.5V VR=0~50kΩ Note 1 : Please keep minimum of 2mm clearance (all directions) between inverter high voltage area as marked on mechanical drawing and any conductors. Note 4 : In test circuit; if any of switches SW3, Sw4 or SW5 opens , then the alarm signal will be activated (+5V). Note 3: In test circuit; 5pF capacitor across the load re sistor is add to simulate LCD back-light stray capacitor. Note 2 : Open circuit on all lamps for more than 3 seconds, will shut the inverter down. Output Current Input Current 1 Frequency Open Voltage Parameters Symbol Conditions RL1 (k ) // CL1(pF) Ta ( )Vin (V) NoteUnit Specifications Iout1 / Iout2 Iin1 FL Vopen -10 ~ +70 5.5 6.0 6.5 1.2 Adc kHz Vrms typ.min. max.Vbr / VR 2.0 2.8 0.8 1.0 35 40 45 1500 - 1700 5.3 6.0 6.7 85 ~ 95 // 5 90 // 5 10.8 °C Ω mArms mArms mArms0V / 0Ω 0V / 0Ω 0V / 0Ω 0V / 0Ω 2.5V / 50kΩ -10 ~ +70 -10 ~ +70 -10 ~ +70 0V / 0Ω Max Brightness. Min Brightness. 12 ± 0.6 12 ± 1.2 5 ± 0.25 Vbr (V) 5 ± 0.25 5 ± 0.25 5 ± 0.25 5 ± 0.25 5 ± 0.25 12 ± 0.6 12 ± 0.6 12 ± 0.6 RL2 (k ) // CL2(pF)Ω 85 ~ 95 // 5 90 // 5 90 // 5 90 // 5 85 ~ 95 // 5 85 ~ 95 // 5 0 ± 0.25 -10 ~ +700V / 0Ω 90 // 5 90 // 5 12 ± 0.6 -1 . 0-m A d cInput Current 2 Iin2 85 ~ 95 // 5 85 ~ 95 // 5 Alarm Signal (Note 4) Vst 12 ± 1.2 12 ± 1.2 12 ± 1.2 5 ± 0.25 5 ± 0.25 5 ± 0.25 0V / 0Ω 0V / 0Ω 0V / 0Ω -10 ~ +70 -10 ~ +70 -10 ~ +70 85 ~ 95 // 5 85 ~ 95 // 5 85 ~ 95 // 5 85 ~ 95 // 5 4.5 5.0 5.5 4.5 5.0 5.5 - 0 0.5 Vdc Vdc Vdc RL2 // CL2 open Normal RL1 // CL1 open 23 ± 5 23 ± 5 1000:1 PROBE Iin VopenCN1-1 CN1-2 CN1-3 CN1-4 CN1-5 CN1-6 CN1-7 FL a b SW1 Vrmt 0/5V Vst V a b SW2 Q6 C10 C25 T1 RL2 RL1 Iout2 Iout1 CN2-1 CN2-4 CN2-2 SW3 SW4 SW5 CL2 CL1 A~ A V AVin 10.8~13.2V F V Vbr 0~2.5V Rbr 0~50kΩ V