CXA-L10L POWER-SYSTEMS
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
CXA-L10L (4.5W DUAL OUTPUTS, PCB MOUNTABLE TYPE) DC-AC INVERTER UNIT (STANDARD) Power Systems – The Power Solution Web: www.Power-Systems.de Address: Dörnet 8 ; 74360 Ilsfeld-Auenstein / Germany Email: Info@Power-Systems.de Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 80 All specification are subject to change without notice. Page ( 1 / 4 ) VER, 04 October 2002 DESCRIPTION : TDK DC/AC Inverter, CXA-series, are low-noise, high frequency power sources developed for driving Cold Cathode Fluorescent Lamps operating at 20~80 kHz. These inverters are designed to handle a wide range of lamp characteristics. FEATURES : Constant current output ensures compatibility with a wide range of discharge lamps. High efficiency resonant circuitry produces low-noise, sinusoidal-wave output. One-lamp/two-lamp combined-use capability allows use in four different configurations. Common ground or floating bulb configurations. Compact size and light weight facilitate PC board mounting. High Efficiency (80%) TEMPERATURE & HUMDITY : Operating Temperature Range -10 °C ~ +60°C Storage Temperature Range -20 °C ~ +85°C Humidity 95%RH max (No dew) DIMENSIONS : Unit : mm Weight: 11.4 (g) typ. (Bottom View) *1 Remove for Isolated Ground 21Max 16.5±0.2 15.24±0.2 0.5±0.2 44Max 38.1±0.2 5.08±0.2 26±0.2 R1.15±0.2 Jumper (*1) 13Max5Min (1.0) (Solder plated obstinate copper wire) (Side View)
CXA-L10L (4.5W DUAL OUTPUTS, PCB MOUNTABLE TYPE) DC-AC INVERTER UNIT (STANDARD) Power Systems – The Power Solution Web: www.Power-Systems.de Address: Dörnet 8 ; 74360 Ilsfeld-Auenstein / Germany Email: Info@Power-Systems.de Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 80 All specification are subject to change without notice. Page ( 2 / 4 ) VER, 04 October 2002 Pin No. Symbols Ratings
1 Vin 12V
2 GND 0V
3 OUT1 300Vrms
4 OUT2 300Vrms
5 OUT GND 0V
CONNECTOR CONFIGURATION: ELECTRICAL CHARACTERISTICS: Vin [V] Ta [°C] RL [K Ω] Min. Typ. Max. 12±0.12 23±5 30 9 10 11 12±0.6 -10~60 23~37 8 10 12 Input Current Iin 12±0.6 -10~60 23~37 - 320 480 mA DC Frequency F 12±0.6 -10~60 23~37 25 30 35 kHz Open Circuit Voltage Vopen 12±0.6 -10~60 ∞ 800 900 - Vrms 12±0.12 23±5 50 5.3 6 6.7 12±0.6 -10~60 38~62 4.7 6 7.3 Input Current Iin 12±0.6 -10~60 38~62 - 200 300 mA DC Frequency F 12±0.6 -10~60 38~62 30 35 40 kHz Open Circuit Voltage Vopen 12±0.6 -10~60 ∞ 800 900 - Vrms 12±0.12 23±5 60 4.5 5 5.6 12±0.6 -10~60 45~75 4.0 5 6.1 Input Current Iin 12±0.6 -10~60 45~75 - 180 270 mA DC Frequency F 12±0.6 -10~60 45~75 25 30 35 kHz Open Circuit Voltage Vopen 12±0.6 -10~60 ∞ 800 900 - Vrms Input Current Iin 12±0.6 -10~60 45~75 - 320 480 mA DC Frequency F 12±0.6 -10~60 45~75 25 30 35 kHz Open Circuit Voltage Vopen 12±0.6 -10~60 ∞ 800 900 - Vrms Output Current Iout1 / Iout2 Specification Unit Iout Output Current Iout Output Current Iout Output Current Connection mArms Items Symbols Conditions mArms mArms mArms Items Symbols Specification Unit Input Voltage Vin 0~14.4 VDC Output Power Pout 4.5 W ABSOLUTE MAXIMUM RATINGS:
CXA-L10L (4.5W DUAL OUTPUTS, PCB MOUNTABLE TYPE) DC-AC INVERTER UNIT (STANDARD) Power Systems – The Power Solution Web: www.Power-Systems.de Address: Dörnet 8 ; 74360 Ilsfeld-Auenstein / Germany Email: Info@Power-Systems.de Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 80 All specification are subject to change without notice. Page ( 3 / 4 ) VER, 04 October 2002 APPLICATION Pin3 (out1) Pin5 (out GND) Pin1 (Vin) Pin2 (GND) Vin CCFL Connection 1 Pin4 (out2) Pin3 (out1) Pin5 (out GND) Pin1 (Vin) Pin2 (GND) Vin CCFL Connection 2 Pin4 (out2) Pin3 (out1) Pin5 (out GND) Pin1 (Vin) Pin2 (GND) Vin CCFL Connection 3 Pin4 (out2) Pin3 (out1) Pin5 (out GND) Pin1 (Vin) Pin2 (GND) Vin CCFL1 Connection 4 Pin4 (out2) CCFL2 Note 1. For circuit connection, pleas e prefer to test circuit diagram. Note 2. Please use minimum of 2mm clearance (all directions) between inverter high voltage area and any conductors. Please refer to mechanical drawing for marking of high voltage area. Note 3. Open voltage (strike voltage) is measured acro ss the transformer secondary winding at no load as the reading at the output connector would be less than the actual value. Note 4. If the start up voltage falls below Cold Cathode Tube strike voltage, the CCFL will not light up easily specially at lower ambient temperature. Please review mounting instruction to avoid any abnormal operation due to coupling/leakage capacitance of inverter high voltage area to any surrounding conductor. Note 5. For operation in floating mode, please remove jumper (J1) on top side of PCB that pin2 and pin5. Note 6. To prevent electrical discharge from high volt age area, please use non-conductive fastener in U mounting hole.
CXA-L10L (4.5W DUAL OUTPUTS, PCB MOUNTABLE TYPE) DC-AC INVERTER UNIT (STANDARD) Power Systems – The Power Solution Web: www.Power-Systems.de Address: Dörnet 8 ; 74360 Ilsfeld-Auenstein / Germany Email: Info@Power-Systems.de Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 80 All specification are subject to change without notice. Page ( 4 / 4 ) VER, 04 October 2002 Connection Test circuit Notes lin (1)Vin OUT1(3) OUT2 (4) lout Short of OUT1,OUT2 RL Open of OUT2 A V A Vin (2)GND 1000:1 V lin (1)Vin OUT1 (3) OUT2(4) lout RL A V A Vin (2)GND 1000:1 V NC lin (1)Vin OUT1 (3) OUT2 (4) A V Vin (2)GND 1000:1 V lout1 RL2lout2 RL1 A A OUT GND(5) OUT GND(5) OUT GND(5) Short of OUT2,OUT GND3 lin (1)Vin OUT1 (3) OUT2(4) lout RL A V A Vin (2)GND 1000:1 V OUT GND(5) TEST CIRCUIT: