CXA-0359 POWER-SYSTEMS

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

CXA-0359(R) (8 W DUAL OUTPUTS WITH DIMMING FUNCTION) Power Systems – The Power Solution Web: www.Power-Systems.de Address: Hauptstr. 48 ; 743 60 Ilsfeld-Auenstein / Germany Email: Info@Power-Systems.de Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 All specifications are subject to change without notice. Page (1) Version 1.2.1, 15th May 2007 (PRELIMINARY INFORMATION) DESCRIPTION : This low profile DC to AC Inverter is developed for Dual lamps. NL10276BC24-13 (NEC) NL8060BC31-27 (NEC) NL8060BC31-28D (NEC) APPLICABLE LCD: 6.4 to 15 inches Dual lamp type Lamp Voltage 600 Vrms Lamp Current 5.0 mArms Lamp Start Up Voltage 1.800 Vrms (Vin : 12 Vdc) FEATURES : Dimming function Remote ON/OFF Open Lamp Detection RoHS compliant (R) Boost mode TEMPERATURE & HUMIDITY : Operating Temperature Range -10 °C ~ +70 °C Storage Temperature Range -30 °C ~ +85 °C Humidity 95 %RH max DIMENSIONS : L x W x H 120 x 25 x 8.5 mm Unit : mm Weight :23 (g) typ. Note: Please use plastic screw in case of a non-insulating mounting base! CXA-0359 3303 MADE IN JAPAN SILICONE 9,10 CN2 (5) (5)15±0.1 25±0.3 (10) (13) (25)82±0.1 120±0.3 (10) 1CN1 IC21 65mm (a:High Voltage generation area) 8.5 max. (1.0) Components No. Part Description Qty. Material Note

1 PCB 1 UL94V-0 (FR-4 or CEM-3) t=1m m

2 Connector CN1 1 53261-0990 Molex or equal

3 Connector CN2 1 SM03(7-D1)B-BHS-1-TB JST or equal

CXA-0359(R) (8 W DUAL OUTPUTS WITH DIMMING FUNCTION) Power Systems – The Power Solution Web: www.Power-Systems.de Address: Hauptstr. 48 ; 743 60 Ilsfeld-Auenstein / Germany Email: Info@Power-Systems.de Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 All specifications are subject to change without notice. Page (2) Version 1.2.1, 15th May 2007 (PRELIMINARY INFORMATION) Low-mode Vin (V) Vrmt (V) Vbr (V) Tu (° C) Min. Typ. Max. Input Current Iin2 12±0.6 5±0.25 2.5 -10 ~ +70 - - 1 m Adc Remote off Frequency F1 12±0.6 5±0.25 2.5 -10 ~ +70 58 63 68 kHz Frequency (Duty) F2 12±0.6 5±0.25 0 -10 ~ +70 310 340 370 Hz Open Circuit Voltage Vopen 11.4 5±0.25 2.5 -10 ~ +70 1600 - 1800 Vrm s 12±0.6 5±0.25 2.5 -10 ~ +70 - 0 0.5 Vdc Normal Alarm Signal Vst Unit Note Parameters Symbols Conditions Specification ELECTRICAL CHARACTERISTICS : High-mode Vin (V) Vrmt (V) Vbr (V) Tu (° C) Min. Typ. Max. Input Current Iin2 12±0.6 5±0.25 2.5 -10 ~ +70 - - 1 m Adc Remote off Frequency F1 12±0.6 5±0.25 2.5 -10 ~ +70 58 63 68 kHz Frequency (Duty) F2 12±0.6 5±0.25 0 -10 ~ +70 310 340 370 Hz Open Circuit Voltage Vopen 11.4 5±0.25 2.5 -10 ~ +70 1800 - 2000 Vrm s 12±0.6 5±0.25 2.5 -10 ~ +70 - 0 0.5 Vdc Normal Unit Note Alarm Signal Vst Parameters Symbols Conditions Specification Note 1 : Please keep minimum of 2mm clearance (all directions) between inverter high voltage area as marked on mechanical drawing and any conductors. Note 2 : Two stages of dimming range of a Hi mode and a Low mode is selectable. Output side CN2: Pin No. Symbols Ratings CN 2-1 Vhigh 600 Vrm s (5.0 m Arm s) CN 2-2 Vhigh 600 Vrm s (5.0 m Arm s) CN 2-3 N.C. - CN 2-4 Vlow (GND) Input side CN1: Pin No. Symbols Ratings CN 1-1+2 Vin 11.4 ~ 12.6 Vdc CN 1-3+4 GND - CN 1-5 Vrm t 0 ~ 0.4 = OFF/ 2.5 ~ Vin = ON CN 1-6 Vbr / Rbr1 0 ~ 2.5 Vdc / 0 + 10 k Ω CN 1-7 Rbr2 0 ~ 10 k Ω CN 1-8 Vst 0 / 5 Vdc (0 to 0.4V : Low-mode CN 1-9 H/L 0V/5V 2.5 to Vin : High-mode Open : Low-mode)

CXA-0359(R) (8 W DUAL OUTPUTS WITH DIMMING FUNCTION) Power Systems – The Power Solution Web: www.Power-Systems.de Address: Hauptstr. 48 ; 743 60 Ilsfeld-Auenstein / Germany Email: Info@Power-Systems.de Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 All specifications are subject to change without notice. Page (3) Version 1.2.1, 15th May 2007 (PRELIMINARY INFORMATION) TEST CIRCUIT : SW2 Unit operation a Voltage dim m ing Vbr= 0 ~ 2.5V (Vbr=0V : M ax Brightness) b Variable resistance dim m ing Rbr= 0 ~ 10k Ω (Rbr=0 Ω : M ax B rightness) SW1 Operation of unit a Operation b Non operation Open Operation SW3 Unit operation a High-m ode (Lam p current 7m Arm s/Lam p) b Low-m ode (Lamp current 5mArms/Lamp) Open Low-m ode (Lamp current 5mArms/Lamp) Load condition Alarm output Shut-down function* 2 (CN1-8)* 1 Normal condition 0.5V max. Does not shut down When one load 5±0.5V Does not shut down (lamp) is run-out When 2 loads 5±0.5V Shut down (lamps) is run-out *1: In the case of low mode, and more than one of SW4 – SW6 in the connection diagramm was open, alarm signal will output 5V. (Please make CN1-8 opening in a high mode) *2 : When all lamps were opened, this inverter has included protective function to stop operation in about 10 seconds