CR6KM-12A RENESAS

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Features

  • IT (AV) : 6 A
  • VDRM : 600 V
  • IGT : 10 mA
  • Viso : 2000 V
  • Insulated Type
  • Planar Passivation Type
  • UL Recognized : Yellow Card No. E223904 File No. E80271 Outline TO-220FN 1. Cathode 2. Anode 3. Gate

Applications

Switching mode power supply, regulator for autocycle, motor control, heater control, and other general purpose control Voltage classParameter Symbol 12 Unit Repetitive peak reverse voltage V RRM 600 V Non-repetitive peak reverse voltage V RSM 720 V DC reverse voltage V R (DC) 480 V Repetitive peak off-state voltage V DRM 600 V DC off-state voltage V D (DC) 480 V

Rev.1.00, Aug.06.2004, page 2 of 6 Parameter Symbol Ratings Unit Conditions RMS on-state current I T (RMS) 9.4 A Average on-state current I T (AV) 6 A Commercial frequency, sine half wave 180° conduction, Tc = 85°C Surge on-state current I TSM 90 A 60Hz sine half wave 1 full cycle, peak value, non-repetitive I2t for fusing I 2t3 4 A 2s Value corresponding to 1 cycle of half wave 60Hz, surge on-state current Peak gate power dissipation P GM 5W Average gate power dissipation P G (AV) 0.5 W Peak gate forward voltage V FGM 6V Peak gate reverse voltage V RGM 10 V Peak gate forward current I FGM 2A Junction temperature Tj – 40 to +125 °C Storage temperature Tstg – 40 to +125 °C Mass — 2.0 g Typical value Isolation voltage Viso 2000 V Ta = 25 °C, AC 1 minute, each terminal to case

Electrical Characteristics

Characteristics ValueParameter Symbol Min. Typ. Max. Unit Test conditions Repetitive peak reverse current I RRM — — 2.0 mA Tj = 125 °C, VRRM applied Repetitive peak off-state current I DRM — — 2.0 mA Tj = 125 °C, VDRM applied On-state voltage V TM — — 1.7 V Tc = 25 °C, ITM = 20 A, instantaneous value Gate trigger voltage V GT — — 1.0 V Tj = 25 °C, VD = 6 V, IT = 1 A Gate non-trigger voltage V GD 0.2 — — V Tj = 125 °C, VD = 1/2 VDRM Gate trigger current I GT — — 10 mA Tj = 25 °C, VD = 6 V, IT = 1 A Holding current I H —1 5— m A T j = 2 5 °C, VD = 12 V Thermal resistance R th (j-c) —— 4 . 0 °C/W Junction to case Note1 Notes: 1. The contact thermal resistance R th (c-f) in case of greasing is 0.5°C/W.

Rev.1.00, Aug.06.2004, page 3 of 6 Performance Curves Maximum On-State Characteristics On-State Current (A) On-State Voltage (V) Rated Surge On-State Current Surge On-State Current (A) Conduction Time (Cycles at 60Hz) Maximum Transient Thermal Impedance Characteristics (Junction to case) Transient Thermal Impedance (°C/W) Time (s) Gate Trigger Voltage vs. Junction Temperature Junction Temperature (°C) Gate Voltage (V) Gate Current (mA) Gate Trigger Current vs. Junction Temperature Junction Temperature (°C) Gate Characteristics × 100 (%)Gate Trigger Current (Tj = t°C) Gate Trigger Current (Tj = 25°C) × 100 (%)Gate Trigger Voltage (Tj = t°C) Gate Trigger Voltage (Tj = 25°C) 100 25 1 0 1 37 1 0 242 5 37 4 120 160 200 100 140 180 501 4 23 103 102 101 100 100 571 0 1 23 57 1 0 2 23 5 23 571 03 102 101 10–1 60–40–60 0 20 40 80 100120 140 103 102 101 100 –20 102 10–2 100 101 10–1 100 10–3 23 57 2310–2 57 210–1 10135 7 2 35 7–60 –40 –20 0 20 40 60 80 100 120 140 103 102 101 Tc = 125°C PGM = 5W PG(AV) = 0.5W VFGM = 6V VGT = 1V IFGM = 2A IGT = 10mA VGD = 0.2V Typical Example Typical Example

Rev.1.00, Aug.06.2004, page 4 of 6 Maximum Average Power Dissipation (Single-Phase Half Wave) Average Power Dissipation (W) Average On-State Current (A) Allowable Case Temperature vs. Average On-State Current (Single-Phase Half Wave) Allowable Case Temperature vs. Average On-State Current (Single-Phase Full Wave) Allowable Case Temperature vs. Average On-State Current (Rectangular Wave) Case Temperature (°C)Case Temperature (°C)Case Temperature (°C) Average On-State Current (A) Maximum Average Power Dissipation (Single-Phase Full Wave) Average Power Dissipation (W) Average On-State Current (A) Average On-State Current (A) Average On-State Current (A) Maximum Average Power Dissipation (Rectangular Wave) Average Power Dissipation (W) Average On-State Current (A) 160 120 140 100 0 80 246 7135 θ = 30° 60° 120°90° 180° 0 160 4 8 12 1426 1 0 θ = 30° 60° 120° 90° 180° 0 16 0 4 8 12 1426 1 0 θ = 30° 60° 120° 90° 180° 160 120 140 100 0 16 0 48 1 2 1 426 10 θ = 30° 120° 180° 60° 90° 160 120 140 100 0 160 4 8 12 1426 10 θ = 30° 120° 180° DC 270° 90° 60° 0 160 4 8 12 1426 1 0 θ = 30° 60° 120° 90° 180° 270° DC θ 360° Resistive, inductive loads θ 360° Resistive, inductive loads θ θ 360° Resistive loads θ θ 360° Resistive loads θ 360° Resistive, inductive loads θ 360° Resistive, inductive loads

Rev.1.00, Aug.06.2004, page 5 of 6 Breakover Voltage vs. Junction Temperature Junction Temperature (°C) × 100 (%) Breakover Voltage (Tj = t°C) Breakover Voltage (Tj = 25°C)× 100 (%) Holding Current (Tj = t°C) Holding Current (Tj = 25°C) Holding Current vs. Junction Temperature Junction Temperature (°C) Breakover Voltage vs. Rate of Rise of Off-State Voltage Rate of Rise of Off-State Voltage (V/µs) × 100 (%) Breakover Voltage (dv/dt = vV/µs) Breakover Voltage (dv/dt = 1V/µs) 23101 571 0 2 23 57 1 0 3 23 57 1 0 4 160 100 120 140 160 120 140 100 0 1600 40 80 120 14020 60 100 103 102 101 –60 –40 –20 0 20 40 60 80 100 120 140 –60 –40 –20 0 20 40 60 80 100 120 140 160 120 140 100 102 2310–1 571 0 0 23 57 1 0 1 23 57 1 0 2 103 101 –60 –40 –20 0 20 40 60 80 100 120 140 Turn-Off Time vs. Junction Temperature Turn-Off Time (µs) Junction Temperature (°C) Gate Trigger Current vs. Gate Current Pulse Width × 100 (%)Gate Trigger Current (tw) Gate Trigger Current (DC) Junction Temperature (°C) × 100 (%) Repetitive Peak Reverse Voltage (Tj = t°C) Repetitive Peak Reverse Voltage (Tj = 25°C) Gate Current Pulse Width (µs) Repetitive Peak Reverse Voltage vs. Junction Temperature Typical Example Typical Example Tj = 125°C Typical Example Distribution Typical Example VD = 300V, dv/dt = 20V/µs VR = 50V IT = 6A, – di/dt = 5A/µs Typical Example Typical Example

Rev.1.00, Aug.06.2004, page 6 of 6 Package Dimensions TO-220FN  2.0 Cu alloy Symbol Dimension in Millimeters Min Typ Max A b D E e x y ZD ZE 10 ± 0.3 15 ± 0.314 ± 0.5 3 ± 0.33.6 ± 0.3 2.54 ± 0.25 1.1 ± 0.2 1.1 ± 0.2 0.75 ± 0.15 2.54 ± 0.25 6.5 ± 0.3 2.6 ± 0.2 4.5 ± 0.2 2.8 ± 0.2 0.75 ± 0.15 φ 3.2 ± 0.2 Note 1) The dimensional figures indicate representative values unless otherwise the tolerance is specified. Order Code Lead form Standard packing Quantity Standard order code Standard order code example Straight type Plastic Magazine (Tube) 50 Type name CR6KM-12A Lead form Plastic Magazine (Tube) 50 Type name – Lead forming code CR6KM-12A-A8 Note : Please confirm the specificat ion about the shipping in detail.

Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan http://www.renesas.com Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Renesas Technology Europe Limited. Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, United Kingdom Tel: <44> (1628) 585 100, Fax: <44> (1628) 585 900 Renesas Technology Europe GmbH Dornacher Str. 3, D-85622 Feldkirchen, Germany Tel: <49> (89) 380 70 0, Fax: <49> (89) 929 30 11 Renesas Technology Hong Kong Ltd. 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2375-6836 Renesas Technology Taiwan Co., Ltd. FL 10, #99, Fu-Hsing N. Rd., Taipei, Taiwan Renesas Technology (Shanghai) Co., Ltd. 26/F., Ruijin Building, No.205 Maoming Road (S), Shanghai 200020, China Renesas Technology Singapore Pte. Ltd. 1, Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 RENESAS SALES OFFICES © 2004. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .1.0