DATASHEET SEARCH SITE
Document overview
- PDF pages: 4
Technical content
Page 1

NTC Type CR1
Harsh Environment
Chip Thermistor
Description
NTC type CR1 are NK format chip thermistors on Sn coated Alloy 52 leads with a high performance acid and moisture resistant coating. Our NTC chip thermistors are ideal for harsh environment applications and high volume assembly.
Features
Applications
- AEC Q200 Rev D Qualified
- Automotive
- Suitable for EGR, SCR, TMAP, OAT, HVAC &
- HVAC
white goods applications
- White goods
- Performance up to 190°C with excellent stability
- Marine
- Small body diameter
- Aerospace
- Fast response
- Military
- High thermal shock resistance
- Industrial
- Harsh environment fluids resistance
- Healthcare
- Water immersion
- Flexible – coated leads can be formed
- Insulation resistance to 1kV d.c.
- Designed for accurate temperature measurement, control & compensation
- Tight tolerances on resistance and B value
- Available on bandolier to IEC 286-2 RoHS 2011/65/EC / REACH compliant
Amphenol
Advanced Sensors
Page 2
Type CR1 Specifications
Specification Data
Minimum operating temp. -40°C
Performance up to: 190°C
15s (cooling)
Thermal time constant
2.4s (ambient change)
Dissipation factor
2.2mW/K
Mass
0.18g
1000/box
Packing
2000/reel
Typical Dimensions (mm)
Options
- Other resistance values and B values within the ranges shown
- Alternative reference temperatures 0°C to 100°C
- Bulk packed or bandolier up to H1 = 48mm
- Lead materials : Steel/Alloy 52
- Contact Amphenol for specific application requirements
Coding:
- Standard EGR Sensor - NKA202C2B2
- For CR1 Coating add Suffix C to Code
See Table on page 4 for standard resistance values

Bandolier Schematic

Page 3
Bandolier Specifications
Item
TOTAL BAND THICKNESS MAXIMUM BAND THICKNESS Including component lead/splices CARRIER TAPE WIDTH ADHESION TAPE WIDTH The hold down tape shall not protrude beyond either edge of the carrier tape POSITION OF ADHESION TAPE Gap between upper edges of carrier tape and hold-down tape SPROCKET HOLE POSITION SPROCKET HOLE DIAMETER PITCH OF COMPONENT SPROCKET HOLE PITCH PITCH TOLERANCE OVER ANY 20 PITCHES WIRE POSITION Distance between the ordinate and the first lead of the following component in the direction of unreeling or feeding. (Valid from upper edge of the tape to the seating plane) HOLE CENTRE TO COMPONENT CENTRE IN-PLANE COMPONENT DEVIATION Maximum deviation of the component body in the tape plane (from the nominal position)
FRONT TO REAR DEVIATION The maximum lateral deviation of the component from the nominal position measured at the bottom centre of the component body. Maximum alignment deviation of the leads (valid from the upper edge of the tape to the seating plane) when dh is taken as zero, shall be 0.2mm. This dimension must remain in limits after the device has been cropped from the bandolier WIRE SPACING At upper edge of tape WIRE DIAMETER SEATING HEIGHT Distance between the abscissa and the seating plane of the component body with straight leads. HEAD HEIGHT Distance between the abscissa and the top of the component body WIRE PROTRUSION (Adhesive tape) Protrusion of wires beyond the lower side of the adhesive tape
WIRE PROTRUSION (Carrier) Protrusion of wires beyond the lower side of the carrier tape CUT WIRE LENGTH For cut out components the length of the residual leads beyond the upper edge of the carrier tape measured from the abscissa COMPONENT HEAD LENGTH
EGR SENSOR
Resistance
B value 25/85°C
Coating
R100= 186.6Ω ± 2%
NKA202C2B2
3540K ± 0.75%
CR1 Symbol
Value (mm)
t
0.7 ± 0.2
Tt
1.5 MAXIMUM
W
18 + 1.0 / - 0.5
W0
6.0 MINIMUM
W2
3.0 MAXIMUM
W1
9.0 ± 0.5
D0
4.0 ± 0.2
P
12.7 ± 1.0
P0
12.7 ± 0.3 ± 1.0
P1
5.08 ± 0.7
P2
6.35 ± 1.3
dp
± 3
dh
± 3
F
2.5 ± 0.5
d
0.4 ± 0.02
H
45 ±1
H1
48 max
h
5 MAXIMUM
NO PROTRUSION l1
PERMITTED
L
12 Nom
A
5 max
Packing
Bandoliered H1 = 45 ±1mm
Page 4
NKA Standard Range Resistance Values
(other values available upon request)
Maximum#
B Value
Code
R25 Material
Operating
25/85°C
Temp.
Ω
R25°C ± 1%
System
K
°C (°F)
500
2 3540 ± 1%
170 (338)
NKA501C2\*1
500
2A 3627 ± 1%
170 (338)
NKA501C2A\*1
500
7 3977± 1%
170 (338)
NKA501C7\*1
1000
2 3540 ± 1%
170 (338)
NKA102C2\*1
1000
2A 3627 ± 1%
170 (338)
NKA102C2A\*1
1000
7 3977± 1%
170 (338)
NKA102C7\*1
2000
2 3540 ± 1%
170 (338)
NKA202C2\*1
2050
2 3540 ± 0.75%
170 (338)
2000
2A 3627 ± 1%
170 (338)
NKA202C2A\*1
2000
7 3977± 1%
170 (338)
NKA202C7\*1
2700
1 3977 ± 0.75%
190 (374)
NKA272C1\*1
5000
4A 3435 ± 1%
170 (338)
NKA502C4A\*1
5000
1 3977 ± 0.75%
190 (374)
NKA502C1\*1
10000
4A 3435 ± 1%
170 (338)
NKA103C4A\*1
10000
5 3740 ± 1%
170 (338)
NKA103C5\*1
10000
1 3977 ± 0.75%
190 (374)
NKA103C1\*1
12000
5 3740 ± 1%
170 (338)
NKA123C5\*1
30000
8 3977± 1%
170 (338)
NKA303C8\*1
50000
8 3977± 1%
170 (338)
NKA503C8\*1
Replace \* in the table codes shown above as follows:
Loose-packed ............................................ R
Bandoliered ............................................... B
Note: Add Suffix C to Code for CR1
See separate tables for resistance - temperature data
Amphenol
Advanced Sensors
Code
Code
Code
Code
R25°C ± 2% R25°C ± 3%
R25°C ± 5%
R25°C ± 10%
NKA501C2\*2 NKA501C2\*3 NKA501C2\*5
NKA501C2\*10
NKA501C2A\*2 NKA501C2A\*3 NKA501C2A\*5 NKA501C2A\*10 NKA501C7\*2 NKA501C7\*3 NKA501C7\*5
NKA501C7\*10
NKA102C2\*2 NKA102C2\*3 NKA102C2\*5
NKA102C2\*10
NKA102C2A\*2 NKA102C2A\*3 NKA102C2A\*5 NKA102C2A\*10 NKA102C7\*2 NKA102C7\*3 NKA102C7\*5
NKA102C7\*10
NKA202C2\*2 NKA202C2\*3 NKA202C2\*5
NKA202C2\*10
NKA202C2B2 NKA202C2A\*2 NKA202C2A\*3 NKA202C2A\*5 NKA202C2A\*10 NKA202C7\*2 NKA202C7\*3 NKA202C7\*5
NKA202C7\*10
NKA272C1\*2 NKA272C1\*3 NKA272C1\*5
NKA272C1\*10
NKA502C4A\*2 NKA502C4A\*3 NKA502C4A\*5 NKA502C4A\*10 NKA502C1\*2 NKA502C1\*3 NKA502C1\*5
NKA502C1\*10
NKA103C4A\*2 NKA103C4A\*3 NKA103C4A\*5 NKA103C4A\*10 NKA103C5\*2 NKA103C5\*3 NKA103C5\*5
NKA103C5\*10
NKA103C1\*2 NKA103C1\*3 NKA103C1\*5
NKA103C1\*10
NKA123C5\*2 NKA123C5\*3 NKA123C5\*5
NKA123C5\*10
NKA303C8\*2 NKA303C8\*3 NKA303C8\*5
NKA303C8\*10
NKA503C8\*2 NKA503C8\*3 NKA503C8\*5
NKA503C8\*10
www.amphenol-sensors.com
© 2015 Amphenol Corporation. All Rights Reserved. Specifications are subject to change without notice. Other company names and product names used in this document are the registered trademarks or
trademarks of their respective owners.