CPC1006N IXYS

Document overview

  • PDF pages: 6

Technical content

Page 1

Parameter Rating Units
Blocking Voltage 60 V P
Load Current 75 mA / mA rms DC
On-Resistance (max) 10
LED Current to operate 0.5 mA

Features

  • Designed for EN50130-4 Compliant Security Systems
  • 1500Vrms Input/Output Isolation
  • Only 0.5mA of LED Current Required to Operate
  • Small 4-Pin SOP Package
  • High Reliability
  • Arc-Free With No Snubbing Circuits
  • No EMI/RFI Generation
  • Immune to Radiated EM Fields
  • Tape & Reel Version Available
  • Flammability Rating UL 94 V-0

Applications

  • Security
  • Passive Infrared Detectors (PIR)
  • Data Signalling
  • Sensor Circuitry
  • Instrumentation
  • Multiplexers
  • Data Acquisition
  • Electronic Switching
  • I/O Subsystems
  • Meters (Watt-Hour, Water, Gas)
  • Medical Equipment—Patient/Equipment Isolation
  • Aerospace
  • Industrial Controls

DS-CPC1006N-R05

60V Normally-Open Single-Pole

4-Pin SOP OptoMOS® Relay

Description

The CPC1006N is a miniature single-pole, normally-open (1-Form-A) solid state relay in a 4-pin SOP package that employs optically coupled MOSFET technology to provide 1500Vrms of input to output isolation. The relay outputs are constructed with efficient MOSFET switches and photovoltaic die that use IXYS Integrated Circuits Division's patented OptoMOS architecture while the input, a highly efficient infrared LED, provides the optically coupled control. Using IXYS Integrated Circuits Division’s state of the art double-molded vertical construction packaging to produce one of the world’s smallest relays, the CPC1006N offers board space savings of at least 20% over the competitor’s larger 4-pin SOP relay.

Approvals

  • UL Recognized Component: File E76270
  • CSA Certified Component: Certificate 1172007
  • EN/IEC 60950-1 Certified Component: TUV Certificate B 13 12 82667 003

Ordering Information

Part # Description
CPC1006N 4-Pin SOP (100/tube)
CPC1006NTR 4-Pin SOP (2000/reel)

Pin Configuration

1

4

+ Control

Load

3

2 – Control

Load

Switching Characteristics of Normally-Open Devices

PDF page 1 diagram

Page 2

Absolute Maximum Ratings @ 25ºC

Parameter Ratings Units
Blocking Voltage 60 V P
Reverse Input Voltage 5 V
Input Control Current Peak (10ms) 50 mA
1 A
Input Power Dissipation 1 70 mW
Total Power Dissipation 2 400 mW
Isolation Voltage Input to Output 1500 V rms
ESD Rating, Human Body Model 4 kV
Operational Temperature -40 to +85 ºC
Storage Temperature -40 to +125 ºC

1 Derate linearly 1.33 mW / ºC 2 Derate linearly 3.33 mW / ºC

Electrical Characteristics @ 25ºC

Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied.

Typical values are characteristic of the device at +25°C, and are the result of engineering evaluations. They are provided for information purposes only, and are not part of the manufacturing testing requirements.

Parameter Conditions Symbol Min Typ Max Units
Output Characteristics
Load Current Continuous Peak I=0.5mA F I L - - 75 mA / mA rms DC
t=10ms I LPK - - ±350 mA P
On-Resistance 1 I=0.5mA, I=75mA F L R ON - 7 10
Off-State Leakage Current I=0mA, V=60V F L P I LEAK - - 1 A
Switching Speeds Turn-On Turn-Off I=2mA, V=10V F L t on - - 10 ms
t off - - 10 ms
Output Capacitance I=0mA, V=50V, f=1MHz F L C OUT - 5 - pF
Input Characteristics
Input Control Current to Activate 2 I=75mA L I F - 0.1 0.5 mA
Input Control Current to Deactivate - I F 0.05 - - mA
Input Voltage Drop I=5mA F V F 0.9 1.2 1.5 V
Reverse Input Current V=5V R I R - - 10 A
Common Characteristics
Capacitance, Input to Output V =0V, f=1MHz IO C IO - 1 - pF

1 Measurement taken within 1 second of on-time. 2 For applications requiring high temperature operation (greater than 60ºC) a minimum LED drive current of 2mA is recommended.

Page 3

PERFORMANCE DATA\*

Typical LED Forward Voltage Drop

Typical Turn-On Time

Typical Turn-Off Time

(N=50, IF=5mA)

(N=50, IF=2mA, IL=75mA)

(N=50, IF=2mA, IL=75mA)

PDF page 3 diagram
PDF page 3 diagram
PDF page 3 diagram

LED Forward Voltage (V)

Turn-On Time (ms)

Typical On-Resistance Distribution

Typical IF for Switch Operation

(N=50, IF=0.5mA, IL=75mA)

(N=50, IL=75mA)

Turn-Off Time (ms)

Typical Blocking Voltage Distribution (N=50, IF=0mA)

PDF page 3 diagram
PDF page 3 diagram
PDF page 3 diagram

On-Resistance (:)

LED Forward Current (mA)

Typical Turn-On Time

Typical LED Forward Voltage Drop

vs. LED Forward Current

vs. Temperature

(IL=50mA)

Blocking Voltage (VP)

Typical Turn-Off Time vs. LED Forward Current (IL=50mA)

PDF page 3 diagram
PDF page 3 diagram
PDF page 3 diagram

Temperature (ºC)

LED Forward Current (mA)

Typical Turn-On Time

Typical IF for Switch Operation

vs. Temperature

vs. Temperature

(IL=50mA)

(IL=50mA)

LED Forward Current (mA)

Typical Turn-Off Time vs. Temperature (IL=50mA)

PDF page 3 diagram
PDF page 3 diagram
PDF page 3 diagram

Temperature (ºC)

Temperature (ºC)

Temperature (ºC)

\*Unless otherwise noted, data presented in these graphs is typical of device operation at 25ºC. For guaranteed parameters not indicated in the written specifications, please contact our application department.

Page 4

PERFORMANCE DATA\*

Typical Load Current

Maximum Load Current

Typical On-Resistance

vs. Load Voltage

vs. Temperature

vs. Temperature

(IF=0.5mA)

(IF=1mA)

(IF=1mA, IL=50mA)

PDF page 4 diagram
PDF page 4 diagram
PDF page 4 diagram

Temperature (ºC)

Load Voltage (V)

Temperature (ºC)

Typical Leakage vs. Temperature

Output Capacitance vs. Load Voltage

Measured Across Pins 3&4

Typical Blocking Voltage

(IF=0mA, f=1MHz)

(VL=60V)

vs. Temperature

PDF page 4 diagram
PDF page 4 diagram
PDF page 4 diagram

Temperature (ºC)

Temperature (ºC)

Load Voltage (V)

Energy Rating Curve (IF=0.5mA)

PDF page 4 diagram

Time

\*Unless otherwise noted, data presented in these graphs is typical of device operation at 25ºC. For guaranteed parameters not indicated in the written specifications, please contact our application department.

Page 5

Manufacturing Information

Moisture Sensitivity

All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classifies its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below.

Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability.

This product carries a Moisture Sensitivity Level (MSL) classification as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.

Device Moisture Sensitivity Level (MSL) Classifi cation
CPC1006N MSL 3

ESD Sensitivity

This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.

Soldering Profile

Provided in the table below is the Classification Temperature (TC) of this product and the maximum dwell time the body temperature of this device may be (TC - 5)ºC or greater. The classification temperature sets the Maximum Body Temperature allowed for this device during lead-free reflow processes. For through-hole devices, and any other processes, the guidelines of J-STD-020 must be observed.

Device Classifi cation Temperature (T) c Dwell Time (t) p Max Refl ow Cycles
CPC1006N 260ºC 30 seconds 3

Board Wash

IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. Board washing to reduce or remove flux residue following the solder reflow process is acceptable provided proper precautions are taken to prevent damage to the device. These precautions include, but are not limited to: using a low pressure wash and providing a follow up bake cycle sufficient to remove any moisture trapped within the device due to the washing process. Due to the variability of the wash parameters used to clean the board, determination of the bake temperature and duration necessary to remove the moisture trapped within the package is the responsibility of the

user (assembler). Cleaning or drying methods that employ ultrasonic energy may damage the device and should not be used. Additionally, the device must not be exposed to flux or solvents that are Chlorine- or Fluorine-based.

Page 6

MECHANICAL DIMENSIONS

4.089 ± 0.025 (0.161 ± 0.001)

0.203 Typ (0.008 Typ)

6.096 ± 0.102

3.810 ± 0.025

(0.240 ± 0.004)

(0.150 ± 0.001)

0.910 ± 0.025

Pin 1

(0.036 ± 0.001)

2.54 Typ (0.100 Typ)

2.030± 0.025 (0.080± 0.001)

Package standoff: 0.064 ± 0.040 (0.0025 ± 0.0015)

0.481 (0.019)

0.381 TYP.

0-0.1

(0.015 TYP.)

(0-0.004)

CPC1006NTR Tape & Reel

Recommended PCB Land Pattern

0.55 (0.022)

0.559 ± 0.127 (0.022 ± 0.005)

5.50 (0.217)

1.45 (0.057)

2.54 (0.10)

Dimensions mm (inches)

PDF page 6 diagram
PDF page 6 diagram

User Direction of Feed User Direction of Feed

Dimensions mm (inches)

NOTE: All dimensional tolerances per Standard EIA-481-2 except as noted

For additional information please visit our website at: www.ixysic.com

IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.

The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice.

Specification: DS-CPC1006N-R05 ©Copyright 2018, IXYS Integrated Circuits Division OptoMOS® is a registered trademark of IXYS Integrated Circuits Division All rights reserved. Printed in USA. 1/30/2018