CP20 CUI

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

cui.com date 05/07/2012 page 1 of 5 SERIES: CP20 │ DESCRIPTION: 2.0 A PELTIER MODULE date 05/07/2012 page 1 of 5

FEATURES

  • solid state device
  • small and lightweight
  • precise temperature control
  • quiet operation RoHS MODEL input voltage input current output Qmax1 output ∆Tmax2 max (V) max (A) Th=27°C (W) Th=50°C (W) Th=27°C (°C) Th=50°C (°C) CP20151 3.8 2 3.7 4.0 66 72 CP20251 8.6 2 8.5 9.4 66 72 CP20351 15.4 2 15.2 16.9 66 72 Notes: 1. maximum cooling capacity at I max, Vmax, and ∆T=0°C 2. maximum temperature difference at I max, Vmax, and Q=0W (maximum parameters are measured in a vacuum) GENERAL parameter conditions/description min typ max units internal resistance3 CP20151 CP20251 CP20351 1.44 3.33 6.03 1.6 3.7 6.7 1.76 4.07 7.37 Ω Ω Ω solder melting temperature connection between termoelectric pairs 138 °C assembly compression 98.07 N/cm kgf/cm2 hot side plate 80 °C MTBF 200,000 hours Notes: 3. measured by AC 4-terminal method at 25°C For further information and product selection refer to peltier applicaftion notes.pdf CP20 X 51 Base Number PART NUMBER KEY Thickness Length/Width: 1 = 15 x 15 mm 2 = 20 x 20 mm 3 = 30 x 30 mm For more information, please visit the product page.

cui.com CUI Inc │ SERIES: CP20 │ DESCRIPTION: 2.0 A PELTIER MODULE date 05/07/2012 │ page 2 of 5 1.0 2.0 3.0 4.0 2.0 4.0 Heat Pumped (W) Input Voltage (V) 2.0 A 1.6 A 1.2 A 0.8 A 0.4 A 2.0 A 1.6 A 1.2 A 0.8 A 0.4 A CP20151 PERFORMANCE (Th=27°C) 1.0 2.0 3.0 4.0 2.0 4.0 Heat Pumped (W) Input Voltage (V) 2.0 A 1.6 A 1.2 A 0.8 A 0.4 A 2.0 A 1.6 A 1.2 A 0.8 A 0.4 A CP20151 PERFORMANCE (Th=50°C) For more information, please visit the product page.

cui.com CUI Inc │ SERIES: CP20 │ DESCRIPTION: 2.0 A PELTIER MODULE date 05/07/2012 │ page 3 of 5 70 60 50 40 30 20 10 0 2.0 4.0 6.0 12.0 6.0 8.0 Heat Pumped (W) Input Voltage (V) 2.0 A 1.6 A 1.2 A 0.8 A 0.4 A 2.0 A 1.6 A 1.2 A 0.8 A 0.4 A CP20251 PERFORMANCE (Th=27°C) 70 60 50 40 30 20 10 0 2.0 4.0 6.0 8.0 6.0 12.0 Heat Pumped (W) Input Voltage (V) 2.0 A 1.6 A 1.2 A 0.8 A 0.4 A 2.0 A 1.6 A 1.2 A 0.8 A 0.4 A CP20251 PERFORMANCE (Th=50°C) For more information, please visit the product page.

cui.com CUI Inc │ SERIES: CP20 │ DESCRIPTION: 2.0 A PELTIER MODULE date 05/07/2012 │ page 4 of 5 4.0 8.0 12.0 16.0 8.0 16.0 Heat Pumped (W) Voltage Input (V) 2.0 A 1.6 A 1.2 A 0.8 A 0.4 A 2.0 A 1.6 A 1.2 A 0.8 A 0.4 A CP20351 PERFORMANCE (Th=27°C) 4.0 8.0 12.0 16.0 8.0 16.0 Heat Pumped (W) Voltage Input (V) 2.0 A 1.6 A 1.2 A 0.8 A 0.4 A 2.0 A 1.6 A 1.2 A 0.8 A 0.4 A CP20351 PERFORMANCE (Th=50°C) For more information, please visit the product page.

CUI Inc │ SERIES: CP20 │ DESCRIPTION: 2.0 A PELTIER MODULE date 05/07/2012 │ page 5 of 5 CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com techsupport@cui.com rev. description date 1.0 initial release 09/03/2009 1.01 applied new template 05/07/2012 The revision history provided is for informational purposes only and is believed to be accurate. MECHANICAL DRAWING

REVISION HISTORY

5.1 ±0.01 0.80 (TYP) COLD SIDE Black (-) Red (+) 3.07.0 W L 100.0 5.0 MATERIAL PLATING ceramic plate Al 203 (Alumina) sealer silicon rubber RTV lead wire UL1430 (22AWG) tin joint cover silicon rubber RTV units: mm MODEL LENGTH x WIDTH (mm) CP20151 15 x 15 ±0.3 CP20251 20 x 20 ±0.3 CP20351 30 x 30 ±0.3 For more information, please visit the product page.