CMM6001-SC

CMM6001-SC ETC1

Document overview

• Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

Features

❏ 60 MHz to 3.0 GHz Frequency Range ❏ 38 dBm Output IP3 ❏ 2.5 dB Noise Figure ❏ 12.3 dB Gain ❏ 20.5 dBm P1dB ❏ SOT-89 SMT Package ❏ Single Power Supply ❏ +3V to +5V Voltage Rail

Description

The CMM6001-SC is a high dynamic range amplifier designed for applications operating within the 60 MHz to 3.0 GHz frequency range. It is an ideal solution for transmit and receive functions where high linearity is required. The amplifier has the flexibility of being optimized for a number of wireless applications. The combination of low NF and high IP3 at the same bias point make it an ideal trans- mit or receive solution when used in applications including cellular and PCS (personal communications service) operating from 0.8 to 2.2 GHz; MMDS (multichannel multipoint distrib- ution systems) operating from 2.2 to 2.7 GHz; and WLAN (wireless LAN) operating at 2.4 GHz. The CMM6001-SC is packaged in a low-cost, space efficient, surface mount SOT-89 package which provides excellent electrical stability and low thermal resistance. All devices are 100% RF and DC tested. 60 MHz to 3.0 GHz High Dynamic Range Amplifier Advanced Product Information April 2003 (1 of 4) Functional Block Diagram Absolute Maximum Ratings Parameter Rating Parameter Rating Parameter Rating Supply Voltage +6.0 V Storage Temperature -55°C to +125°C Operating Temperature -40°C to +85°C RF Input Power +10 dBm Junction Temperature 150°C Thermal Resistance 150°C/W Parameter Condition Min Typ Max Units Frequency Range 0.60 3.0 GHz Gain Externally matched 10.5 12.5 dB Input Return Loss Externally matched -10 dB Output IP3 +33 +36 dBm Noise Figure 2.5 2.8 dB Output P1dB 20.5 dBm Operating Current Range 55 75 100 mA Supply Voltage 5.0 V

Electrical Characteristics

Unless otherwise specified, the following specifications are guaranteed at room temperature in a Celeritek test fixture. Notes: 1. T = 25°C, Vdd = 5.0, Frequency = 800 MHz, 50 Ohm system 2. OIP3 measured with two tones at output power of 5 dBm/tone separated by 10 MHz. Operation of this device above any of these parameters may cause damage. Parameter Typical Units Frequency Range 900 1900 2400 MHz Gain 12.5 11.5 10.8 dB Input Return Loss -18.0 -11.5 -10.0 dB Output Return Loss -17 -16 -15 dB Output IP3 +36 +36 +36 dBm Output P1dB 20.5 19.5 19.5 dBm Noise Figure 2.7 2.8 2.9 dB Typical Parameters Notes: 1. Typical values reflect performance in recommended application circuit. Input Ground Output Bias Ground 1 2 3

3236 Scott Boulevard, Santa Clara, California 95054

Phone: (408) 986-5060 Fax: (408) 986-5095 CMM6001-SC Advanced Product Information - April 2003 (2 of 4) Application Circuit RF OUT uuuu uuuu 56 pF 12 nH Vcc 5VC2 56 pF 10 nH RF IN CMM6001-SC SOT-89 T = 100 mil INPUT MATCHING NETWORK 56 pF T = 70 mil -10 -20 -30 -40 Frequency, GHz Magnitude, dB S21 S11 S22 S-Parameters vs Frequency Ref Designator Value Description Size C1, C4 56 pF MCH185A560JK 0603 C2 0.1 µF VITR 0.1µF 25V CER 0603 CAP 0603 X7R 10% L1 10 nH TOKO LL1608-F10NJ 0603 L2 12 nH TOKO LL1608-F12NK 0603 T = 375 mil T = 485 mil Parameter Typical Units Frequency Range 900 1900 2400 MHz Gain 12.5 11.5 10.8 dB Input Return Loss -18.0 -11.5 -10.0 dB Output Return Loss -17 -16 -15 dB Output IP3 +36 +36 +36 dBm Output P1dB 20.5 19.5 19.5 dBm Noise Figure 2.7 2.8 2.9 dB Notes: 1. Typical values reflect performance in recommended application circuit.

3236 Scott Boulevard Santa Clara, California 95054 Phone: (408) 986-5060 Fax: (408) 986-5095

Advanced Product Information - April 2003 (3 of 4) Typical Scattering Parameters (Vds = +5V, Ids = 75 mA, T = 22°C, unmatched device in a 50 ohm system) Frequency S 11 S21 S12 S22 (MHz) (Mag) (Ang) (Mag) (Ang) (Mag) (Ang) (Mag) (Ang) Notes

Phone: (408) 986-5060 Fax: (408) 986-5095 CMM6001-SC Advanced Product Information - April 2003 (4 of 4) Celeritek reserves the right to make changes without further notice to any products herein. Celeritek makes no warranty, repres entation or guarantee regarding the suitability of its products for any particular purpose, nor does Celeritek assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Celeritek does not convey any license under its patent rights nor the rights of others. Celeritek products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Celeritek product could create a situation where personal injury or death may occur. Should Buyer purchase or use Celeritek products for any such unintended or unauthorized application, Buyer shall indemnify and hold Celeritek and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Celeritek was negligent regarding the design or manufacture of the part. Celeritek is a registered trademark of Celeritek, Inc. Celeritek, Inc. is an Equal Opportunity/Affirmative Action Employer. 123 6XXX XXXXXX ZYYWW DIMENSIONS IN INCHES [MILLIMETERS] 4.50 [0.177] 1.73 [0.068] 0.46 [0.18] 3X 1.50 [0.059] 3.00 [0.118] 0.76 [0.030] 0.38 [0.015] 0.38 [0.015] 4.41 [0.163] 1.55 [0.061] 2.50 [0.096] 0.71 [0.028] MARKINGS: 6XXX = CELERITEK MODEL NO. XXXXXX = WAFER LOT NO. ZYYWW = DATE CODE (YR/WEEK) FIRST LETTER COUNTRY OF ORIGIN IF OTHER THAT USA 0.99 [0.039] 0.58 [0.023] 0.64 [0.025] 0.86 [0.034] 1.27 [0.050] 3.48 [0.137] 5.33 [0.210] 3.86 [0.152] 1.70 [0.067] 2.06 [0.081] 0.41 [0.016] Physical Dimensions

Ordering Information

The CMM6001-SC is available in a surface-mount SOT-89 package and devices are available in tape and reel. Part Number for Ordering Package CMM6001-SC SOT-89 surface-mount power package in tape and reel PB-CMM6001-SC Evaluation Board with SMA connectors for CMM6001-SC