DATASHEET SEARCH SITE

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

CMF (Military RN and RL) www.vishay.com Vishay Dale Revision: 02-May-13 1 Document Number: 31027 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Metal Film Resistors, Military, MIL-R-10509 Qualified, Precision, Type RN and MIL-PRF-22684 Qualified, Type RL

FEATURES

  • Very low noise (- 40 dB)
  • Very low voltage coefficient (5 ppm/V)
  • Controlled temperature coefficient
  • Flame retardant epoxy coating
  • Commercial alternatives to military styles are available with higher power ratings. See CMF Industrial data sheet: (www.vishay.com/doc?31018 Notes (1) Continuous working voltage shall be or maximum working voltage, whichever is less. (2) Formerly rated at 1 W and is the direct replacement for RN70 of MIL-R-10509 rev. D. (3) Tolerances of ± 0.1 %, ± 0.25 % and ± 0.5 % are not applicable to characteristic D. STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL MIL STYLE MIL SPEC. SHEET POWER RATING P70 °C W POWER RATING P125 °C W MAX. WORKING VOLTAGE (1) V RESISTANCE RANGE MIL-R-10509 ± 100 ppm/°C (D) RESISTANCE RANGE MIL-R-10509 ± 50 ppm/°C (C) RESISTANCE RANGE MIL-R-10509 ± 25 ppm/°C (E) RESISTANCE RANGE MIL-PRF-22684 TOL. (3) ± % DIELECTRIC STRENGTH VAC CMF50 RN50 08 - 0.05 200 - 10 to 100K 10 to 100K - 0.1, 0.25, 0.5, 1 450 0.5, 1 450 0.5, 1 500 0.5, 1 900 0.5, 1 900 CMF07 RL07 01 0.25 - 250 - - - 51 to 150K 2, 5 450 CMF20 RL20 02 0.50 - 350 - - - 4.3 to 470K 2, 5 700TECHNICAL SPECIFICATIONS PARAMETER UNIT CONDITION Voltage Coefficient ppm/V 5 when measured between 10 % and full rated voltage Insulation Resistance  10 10 min. dry;  108 min. after moisture test Operating Temperature Range °C - 65/+ 175 (s ee derating curves for military range) Terminal Strength Ib 5 pound pu ll test for RL07/RL20; 2 pound pull test for all others Solderability Continuous satisfactory coverage when tested in accordance with MIL-R-10509 and MIL-PRF-22684 P x R

CMF (Military RN and RL) www.vishay.com Vishay Dale Revision: 02-May-13 2 Document Number: 31027 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note

  • For additional information on packaging, refer to the Through Hole Resistor Packaging document ( www.vishay.com/doc?31544 APPLICABLE MIL-SPECS MIL-R-10509 and MIL-PRF-22684: The CMF models meet or exceed the electrical, environmental and dimensional requirements of MIL-R-10509 and MIL-PRF-22684. Noise: Vishay Dale metal film re sistors have exceptionally low noise level. Average for standard resistance range is 0.10 μV per V over a decade of frequency, with low and intermediate resistance values typically below 0.05 μV per V. GLOBAL PART NUMBER INFORMATION MIL STYLE TOLERANCE CODE RN50 E = 25 ppm 3 digit significant B = ± 0.1 % RN55 C = 50 ppm figure, followed by C = ± 0.25 % D = ± 0.5 % 0R01 = 10 Ω 2512 = 21.5 k Ω 2494 = 2.49 M Ω New Global Part Numbering: RN60D3483FR36 (preferred part numbering format) R N60 D3483FR36 Historical Part Number example: RN60D3483F (will continue to be accepted) 3483DRN60 MIL STYLE CHARACTERISTIC RESISTANCE VALUE TOLERANCE CODE PACKAGING RN65 RN70 RN60 = 100 ppm a multiplierD F = ± 1 % Blank = Standard (Dash number) 88 = Hot solder dip 143 = Non-magnetic R36F PACKAGING SPECIALCHARACTERISTIC RESISTANCE VALUE B14 = Tin/lead, bulk BSL = Tin/lead, bulk, single lot date code R36 = Tin/lead, T/R (full) RE6 = Tin/lead, T/R (1000 pieces) RSL = Tin/lead, T/R, single lot date code Use “R” for values < 100 Ω MIL STYLE TOLERANCE CODE PACKAGING RL07 S = Solderable 2 digit significant G = ± 2 % B14 = Tin/lead, bulk BSL = Tin/lead, bulk, single lot date code R36 = Tin/lead, T/R (full) RE6 = Tin/lead, T/R (1000 pieces) RSL = Tin/lead, T/R, single lot date code RL20 figure, followed by J = ± 5 % a multiplier 4R3 = 4.3 Ω 202 = 2.0 k Ω 474 = 470 k Ω New Global Part Numbering: RL07S471JR36 (preferred part numbering format) Historical Part Number example: RL07S471J (will continue to be accepted) MIL STYLE LEAD MATERIAL RESISTANCE VALUE TOLERANCE CODE PACKAGING RL07 S471JR36 RL07 S 471 J R36 LEAD MATERIAL RESISTANCE VALUE Use “R” for values < 10 Ω SPECIAL Blank = Standard (Dash number) 88 = Hot solder dip 143 = Non-magnetic MATERIAL SPECIFICATIONS Element Nickel-chrome alloy Coating Flame retardant epoxy, formulated for superior moisture protection Core Fire-cleaned high purity ceramic Termination Standard lead material is solder-coated copper. Solderable and weldable. CAGE CODE: 91637 ENVIRONMENTAL SPECIFICATIONS General Environmental performance is shown in the Environmental Performance table. Test methods are those specified in MIL-R-10509 and MIL-PRF-22684. Shelf Life Resistance shifts due to storage at room temperature are negligible.

CMF (Military RN and RL) www.vishay.com Vishay Dale Revision: 02-May-13 3 Document Number: 31027 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Vishay Dale CMF resistors have an operating temperature range of - 65 °C to + 175 °C. They must be derated according to the following curves: DIMENSIONS in inches (millimeters) Notes (1) Lead length for product in bulk pack. For product supplied in Tape and Reel, the actual lead length would be based on the body size, tape spacing and lead trim. Notes

  • Commercial equivalents of military styles are avai lable with higher power ratings. Consult factory. (2) Formerly rated at 1 W and is the direct replacement for RN70 of MIL-R-10509 rev. D. VISHAY DALE MODEL AB C (MAX.) D CMF50 0.150 ± 0.020 (3.81 ± 0.51) 0.065 ± 0.015 (1.65 ± 0.38) 0.244 (6.20) 0.016 ± 0.002 (0.41 ± 0.05) CMF55 0.240 ± 0.020 (6.10 ± 0.51) 0.090 ± 0.008 (2.29 ± 0.20) 0.290 (7.37) 0.025 ± 0.002 (0.64 ± 0.05) CMF60 0.344 ± 0.031 (8.74 ± 0.79) 0.145 ± 0.015 (3.68 ± 0.38) 0.425 (10.80) 0.025 ± 0.002 (0.64 ± 0.05) CMF65 0.562 ± 0.031 (14.27 ± 0.79) 0.180 ± 0.015 (4.57 ± 0.38) 0.687 (17.45) 0.025 ± 0.002 (0.64 ± 0.05) CMF70 0.562 ± 0.031 (14.27 ± 0.79) 0.180 ± 0.015 (4.57 ± 0.38) 0.687 (17.45) 0.032 ± 0.002 (0.81 ± 0.05) CMF07 0.240 ± 0.020 (6.10 ± 0.51) 0.090 ± 0.008 (2.29 ± 0.20) 0.290 (7.37) 0.025 ± 0.002 (0.64 ± 0.05) CMF20 0.375± 0.040 (9.53 ± 1.02) 0.145 ± 0.015 (3.68 ± 0.38) 0.425 (10.80) 0.032 ± 0.002 (0.81 ± 0.05) MILITARY POWER RATING WATTAGE MILITARY QUALIFIED MIL-R-10509 MIL-PRF-22684 AT + 70 °C (D) AT + 125 °C (C and E) AT + 70 °C 0.05 - RN50 - 0.10 - RN55 -

0.125 RN55 RN60 -

0.25 RN60 RN65 RL07

0.50 RN65 RN70 RL20

0.75 (2) RN70 - - RE WOP DETAR FO AMBIENT TEMPERATURE °C 120 100 MIL-R-10509 Char. C and E Rating MIL-R-10509 Char. D Rating MIL-PRF-22684 DERATING 170150130110907050 A B DC (Max.) 1.50 ± 0.125 (1) (38.10 ± 3.18)

CMF (Military RN and RL) www.vishay.com Vishay Dale Revision: 02-May-13 4 Document Number: 31027 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note

  • RL series ar e color banded per MIL-PRF-22684. MARKING (per MIL-PRF-10509) Characteristics: D = 100 ppm, C = 50 ppm, E = 25 ppm Tolerance: F = 1 %, D = 0.5 %, C = 0.25 %, B = 0.1 % Value = Three significant figures and multiplier J = JAN (Joint Army - Navy) brand RN50: (3 lines) RN55, RN60, RN65, RN70 (4 lines) J50D 1211 F137 JAN, type, characteristic Value Tolerance and 3 digit date code DALE 0137J RN55D 1211F Company logo 4 digit date code and JAN brand Type and characteristic Value and Tolerance PERFROMANCE REQUIREMENT MIL-R-10509 MIL-PRF-22684 CHARACTERISTIC D CHARACTERISTIC C CHARACTERISTIC E MIL Temperature Coefficient + 200 ppm/°C - 500 ppm/°C ± 50 ppm/°C ± 25 ppm/°C ± 200 ppm/°C Applicable Vishay Dale Temperature Coefficient ± 100 ppm/°C ± 50 ppm/°C ± 25 ppm/°C ± 200 ppm/°C TEST MIL max. MILmax. MILmax. MILmax. Thermal Shock ± 0.50 % R ± 0.25 % R ± 0.25 % R ± 1.00 % R Short Time Overload ± 0.50 % R ± 0.25 % R ± 0.25 % R ± 0.50 % R Low Temperature Operation ± 0.50 % R ± 0.25 % R ± 0.25 % R ± 0.50 % R Moisture Resistance ± 1.50 % R ± 0.50 % R ± 0.50 % R ± 1.50 % R Dielectric Withstanding Effect of Solder ± 0.50 % R THERMAL RESISTANCE 100 120 APPLIED POWER IN W HEAT RISE (°C ABOVE AMBIENT) CMF65, CMF70 CMF50 CMF55 CMF60 CMF20 CMF07

www.vishay.com Vishay Revision: 02-Oct-12 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain type s of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. Parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. All operating parameters, including typical pa rameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vish ay’s terms and condit ions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicate d in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vi shay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certi fies that all its products that are id entified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The Euro pean Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We co nfirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards.